Sign In  |  Register  |  About Menlo Park  |  Contact Us

Menlo Park, CA
September 01, 2020 1:28pm
7-Day Forecast | Traffic
  • Search Hotels in Menlo Park

  • ROOMS:

The Progress Of Shot blasting and Sand blasting

Generally,sandblasting and shot blasting are the main ways for metal products surface treatment :smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants etc.

news1029 (2)

Shot blasting:

It takes the centrifugal force of the high speed rotating disk to shot the steel shots to the work piece surface to make the surface smooth, rough or remover surface contaminants. It is one of the easiest, convenient ways to remover impurities from the surface prior to any type of coating.

Shot blasting is commonly used for: *The cleaning of iron, steel, non-cast parts, forgings, etc. *Mechanical cleaning of sheets, rods, coils, wire, etc. *Shot peening to alter machanical properties(increasing resistance to fatigue for springs, gears, etc.) *Preparing surfaces to be painted, coated, etc.

news1029 (3)

In some aspects, shot peening is one of shot blasting method to strengthen the surface,forming specific shapes or stress-relieving etc.

Here are some difference between shot blasting and shot peening:

news1029 (1)

The shot blasting abrasives that TAA can supply: steel shot, low carbon steel shot, cut wire conditioned shot, stainless steel cut wire and conditioned shot, copper cut wire conditioned shot etc.

news1029 (4)

Sand blasting:

Sandblasting is a process of using compressed air to propel abrasive media at a very high velocity on a surface to clean (usually rust, old paint), debur or to prepare the surface for a coating of some sort.  It is also one of the easiest, quickest and convenient ways to remove impurities from surface prior to any type of coating.

Sand blasting is commonly used for:*To remove the oil, grease, rust and black scale formed on the surface for die-casting material. *Removing old paint and rust from a metal object to prepare it for painting *Pretreatment or cleaning Prior to die casting, anodization, powder coating and painting.

The sand blasting abrasives that TAA can produce include: steel grit, chilled iron grit, bearing steel gritgarnet, aluminum oxide, glass beads etc.

news1029 (5)

As a leading comprehensive service provider, Zibo TAA not only produce above blasting abrasives for customer, but also produce different types of high-end shot blasting machines / sand blasting equipment, dust removal and environmental protection equipment, various accessories and equipment maintenance and upgrading services, grinding wheels and cutting disks.

For the future, we will take firm steps, adhere to scientific and technological innovation and lean creation, striving to constantly surpass in the field of surface treatment comprehensive services!

news1029 (7) news1029 (6)

news1029 (8)

Media Contact
Company Name: Zibo TAA Metal Technology Co., Ltd.
Email: Send Email
Phone: 15165847801
Country: China

Data & News supplied by
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
Copyright © 2010-2020 & California Media Partners, LLC. All rights reserved.