Filed pursuant to Rule 424(b)5
Registration No. 333-147371

CALCULATION OF REGISTRATION FEE

Title of each class of

Proposed maximum

Proposed maximum

Amount of

securities to be

Amount to be

offering price per

aggregate offering

registration fee

registered

registered

unit

price

(2)

Common Stock, $.01 par value Common Stock Purchase Rights (1)

4,000,000

$

39.48

$

157,920,000

$

4,848.15

PROSPECTUS SUPPLEMENT

 

(To Prospectus dated November 14, 2007)

 

4,000,000 Shares

 

 

The Manitowoc Company, Inc.

 

COMMON STOCK

 

 

 

 

We are offering 4,000,000 shares of our common stock. Our common stock is traded on the New York Stock Exchange under the symbol “MTW.” On November 15, 2007, the last sale price of our common stock as reported on the New York Stock Exchange was $39.50 per share.

 

Investing in our common stock involves risks that are described in the “Risk Factors” section beginning on page S-5 of this prospectus supplement.

 

 

 

 

 

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus supplement or the accompanying prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

 

The shares will be ready for delivery on or about November 21, 2007.

 

 

 

 

Sole Bookrunner and Sole Manager

MORGAN STANLEY

 

 

 

 

 

The date of this prospectus supplement is November 15, 2007

 

TABLE OF CONTENTS

 

 

 

You should rely only on the information contained in or incorporated by reference in this prospectus supplement and the accompanying prospectus. We have not, and the underwriter has not, authorized any other person to provide you with different information. If anyone provides you with different or inconsistent information, you should not rely on it. We are not, and the underwriter is not, making an offer to sell these securities in any jurisdiction where the offer or sale is not permitted. You should assume that the information appearing in this prospectus supplement, the accompanying prospectus and the documents incorporated by reference is accurate only as of their respective dates. Our business, financial condition, results of operations and prospects may have changed since those dates.

ABOUT THIS PROSPECTUS SUPPLEMENT

 

This document is in two parts. The first part is this prospectus supplement, which describes the specific terms of this offering. The second part, the accompanying prospectus, gives more general information, some of which may not apply to this offering. Generally, when we refer only to the “prospectus,” we are referring to both parts combined.

 

If information in this prospectus supplement is inconsistent with the accompanying prospectus, you should rely on this prospectus supplement. This prospectus supplement, the accompanying prospectus and the documents incorporated into each by reference include important information about us, the shares of our common stock being offered and other information you should know before investing. You should read this prospectus supplement and the accompanying prospectus as well as additional information described under “Where You Can Find More Information” in the accompanying prospectus before investing in shares of our common stock.

 

You should rely only on the information contained in or incorporated by reference in this prospectus supplement and the accompanying prospectus. We have not, and the underwriter has not, authorized any other person to provide you with different information. If anyone provides you with different or inconsistent information, you should not rely on it. We are not, and the underwriter is not, making an offer to sell these securities in any jurisdiction where the offer or sale is not permitted. You should assume that the information appearing in this prospectus supplement, the accompanying prospectus and the documents incorporated in each by reference is accurate only as of their respective dates. Our business, financial condition, results of operations and prospects may have changed since those dates.

 

All references to “Manitowoc,” “our company,” “we,” “us” and “our” in this prospectus supplement and the accompanying prospectus mean, unless the context indicates otherwise, The Manitowoc Company, Inc. together with its consolidated subsidiaries. All references in this prospectus supplement to our consolidated financial statements include, unless the context indicates otherwise, the related notes. The market data included or incorporated by reference in this prospectus supplement and the accompanying prospectus, including growth rates and information relating to our relative position in the industries we serve, are based on internal surveys, market research, publicly available information and industry publications. Although we believe that such independent sources are reliable, we have not independently verified the information contained in them.

CAUTIONARY STATEMENT ABOUT FORWARD-LOOKING INFORMATION

 

Statements included or incorporated by reference into this document that are not historical facts are forward-looking statements, which are based upon our current expectations. These statements involve risks and uncertainties that could cause actual results to differ materially from what appears within this document. Forward-looking statements include descriptions of plans and objectives for future operations, and the assumptions behind those plans. The words “anticipates,” “believes,” “intends,” “estimates,” and “expects,” or similar expressions, usually identify forward-looking statements. Any and all projections of future performance are forward-looking statements. In addition to the assumptions, uncertainties and other information referred to specifically in the forward-looking statements, a number of factors relating to each business segment could cause actual results to be significantly different from what is presented in this document or in the documents incorporated by reference into this document. Those factors include, without limitation, the factors described under “Risk Factors” and the following (organized by our three principal segments: Crane, Foodservice and Marine, as described in “Summary — The Manitowoc Company, Inc.,” and our corporation as a whole for factors that overlap two or more of the three segments):

 

Crane — market acceptance of new and innovative products; cyclicality of the construction industry; the effects of government spending on construction-related projects throughout the world; changes in world demand for our crane product offering; the replacement cycle of technologically obsolete and worn out cranes; demand for used equipment; actions of competitors; and foreign exchange rate risk.

 

Foodservice — market acceptance of new and innovative products; weather; consolidations within the restaurant and foodservice equipment industries; global expansion of customers; actions of competitors; the commercial ice-cube machine replacement cycle in the United States; specialty foodservice market growth; future strength of the beverage industry; and the demand for quickservice restaurants and kiosks.

 

Marine — shipping volume fluctuations based on performance of the steel industry; weather and water levels on the Great Lakes; trends in government spending on new vessels; government and military decisions relating to new and existing vessel construction programs; five-year survey schedule; the replacement cycle of older marine vessels; growth of existing marine fleets; consolidation of the Great Lakes marine industry; frequency of casualties on the Great Lakes; and the level of construction and industrial maintenance.

 

Corporate (including factors that may affect all three segments) — changes in laws and regulations throughout the world; the state of financial and credit markets; the ability to finance, complete and/or successfully integrate, restructure and consolidate acquisitions, divestitures, strategic alliances and joint ventures; successful and timely completion of new facilities and facility expansions; competitive pricing; availability of certain raw materials; changes in raw materials and commodity prices; availability of local suppliers and skilled labor; efficiencies and capacity utilization at our facilities; changes in domestic and international economic and industry conditions, including steel industry conditions; changes in the interest rate environment; risks associated with growth; foreign currency fluctuations; world-wide political risk; health epidemics; pressure of additional financing leverage resulting from acquisitions; unanticipated issues in increasing manufacturing efficiencies; changes in revenue, margins and costs; work stoppages and labor negotiations and labor rates; and the ability of our customers to obtain financing.

 

We urge you to consider these factors before investing in our common stock. The forward-looking statements included in this document or in the documents incorporated by reference into this document are made only as of the date of this document or the date of the incorporated document, and we undertake no obligation to publicly update these statements to reflect subsequent events or circumstances.

Common stock offered		4,000,000 shares
Shares outstanding after the offering		129,827,164 shares
Use of Proceeds		We intend to use the net proceeds from this offering to repay debt and for general corporate purposes.
Risk Factors		Please read “Risk Factors” beginning on page S-5 of this prospectus and the other information in this prospectus and the accompanying prospectus for a discussion of factors you should carefully consider before deciding to invest in shares of our common stock.
New York Stock Exchange Symbol		“MTW”

	•	4,729,698 shares of our common stock issuable upon the exercise of stock options outstanding as of November 12, 2007 under our equity compensation plans at a weighted average exercise price of $15.19 per share; and
	•	9,619,082 shares of our common stock available for future issuance under our equity compensation plans at the closing of this offering (based on options outstanding as of November 12, 2007).

	•	our operating and financial performance and prospects;
	•	quarterly variations in the rate of growth of our financial indicators, such as net income per share, net income and revenues;
	•	changes in market expectations as to our future financial performance;
	•	changes in revenue or earnings estimates or publication of research reports by analysts;
	•	any failure by us to achieve the operating results anticipated by analysts or investors;
	•	speculation in the press or investment community;
	•	trends in our industry and the markets in which we operate;
	•	stock market conditions generally and specifically as they may impact us, participants in our industry or comparable companies;
	•	announcements of technological innovations, new products, significant contracts, acquisitions, strategic alliances or joint ventures or financings by us, our customers or our competitors;
	•	changes in the market price of the products we sell;
	•	sales or the perception in the market of possible sales of a large number of shares of our common stock by our directors, officers or employees;
	•	international political instability;
	•	developments or disputes concerning our intellectual property or other proprietary rights;
	•	our involvement in other litigation, including with respect to products liability or environmental claims; and
	•	domestic and international economic, legal and regulatory factors unrelated to our performance.

	•	requiring a supermajority vote of shareholders, in addition to any vote otherwise required, to approve business combinations not meeting adequacy of price standards;
	•	prohibiting some business combinations between us and one of our major shareholders for a period of three years, unless the combination was approved by our board of directors prior to the time the major shareholder became a 10% or greater beneficial owner of shares or under some other circumstances; and
	•	limiting actions that we can take while a takeover offer for us is being made or after a takeover offer has been publicly announced.

	•	matching cash flows and payments in the same currency;
	•	direct foreign currency borrowing; and
	•	entering into foreign exchange contracts for hedging purposes.

		September 30, 2007
						As Adjusted for
		Actual				This Offering
		(in millions)
Cash and cash equivalents		$	103.8			$	157.4
Short-term debt		$	10.4			$	—
Long-term debt			263.4				170.5
Total debt			273.8				170.5
Stockholders’ equity:
Common stock, $0.01 par value			1.3				1.3
Additional paid-in capital			254.4				411.3
Accumulated other comprehensive income			86.0				86.0
Retained earnings			807.1				807.1
Treasury stock, at cost			(90.3	)			(90.3	)
Total stockholders’ equity			1,058.5				1,215.4
Total capitalization		$	1,332.3			$	1,385.9

		High				Low
2007
First Quarter (Ended March 31, 2007)		$	33.00			$	25.67
Second Quarter (Ended June 30, 2007)		$	42.20			$	31.445
Third Quarter (Ended September 30, 2007)		$	44.96			$	32.96
Fourth Quarter (Through November 12, 2007)		$	49.40			$	38.42
2006
First Quarter (Ended March 31, 2006)		$	23.8475			$	12.41
Second Quarter (Ended June 30, 2006)		$	28.015			$	17.00
Third Quarter (Ended September 30, 2006)		$	23.58			$	17.325
Fourth Quarter (Ended December 31, 2006)		$	31.33			$	22.305
2005
First Quarter (Ended March 31, 2005)		$	10.6475			$	8.575
Second Quarter (Ended June 30, 2005)		$	10.6575			$	8.9825
Third Quarter (Ended September 30, 2005)		$	12.70			$	10.2875
Fourth Quarter (Ended March 31, 2005)		$	13.50			$	11.375

 

SELECTED FINANCIAL DATA

 

The following selected historical financial data has been derived from our consolidated financial statements. This data should be read in conjunction with our financial statements and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included in our Annual Report on Form 10-K for the year ended December 31, 2006 and in our Quarterly Report on Form 10-Q for the quarter ended September 30, 2007 incorporated by reference into this prospectus supplement. The information presented reflects all business units other than Diversified Refrigeration LLC, Toledo Ship Repair, Manitowoc Boom Trucks, Inc., Femco Machine Company, Inc., North Central Crane & Excavator Sales Corporation and the Aerial Work Platform businesses, which were either sold or closed during 2002, 2003, 2004 or 2005 and are reported in discontinued operations in the consolidated financial statements. For businesses acquired during the time periods presented, results are included in the table from their acquisition date. We acquired one business during 2007, two businesses during 2006, two businesses during 2002, and four businesses during 2001.

 

On July 26, 2007 the board of directors authorized a two-for-one split of the company’s common stock. Record holders of Manitowoc’s common stock at the close of business on August 31, 2007 received on September 10, 2007 one additional share of common stock for every share of Manitowoc common stock they owned as of August 31, 2007. Manitowoc shares outstanding at the close of business on August 31, 2007 totaled 62,787,642. The company’s common stock began trading at its post-split price at the beginning of trading on September 11, 2007. Amounts from 2002 through 2006 reflect the effect of the two-for-one split. All foreign currencies are translated using the then current exchange rate for assets and liabilities and the weighted average exchange rate for the period for the consolidated statement of operations items. Amounts are in millions except share and per share data.

 

 

 

 

BUSINESS

 

General

 

Founded in 1902, we are a diversified industrial manufacturer in three principal markets: Cranes and Related Products (“Crane”); Foodservice Equipment (“Foodservice”) and Marine. We have over a 100-year tradition of providing high-quality, customer-focused products and support services to our markets worldwide. For the nine months ended September 30, 2007 and the year ended December 31, 2006 we had net sales of $2.9 billion and $2.9 billion, respectively.

 

Our Crane business is a global provider of engineered lift solutions, offering one of the broadest lines of lifting equipment in our industry. We design, manufacture, market and support a comprehensive line of crawler cranes, mobile telescopic cranes, tower cranes and boom trucks. Our Crane products are marketed under the Manitowoc, Grove, Potain, National, Crane CARE and other brand names and are used in a wide variety of applications, including energy, petrochemical and industrial projects, infrastructure development such as road, bridge and airport construction, commercial and high-rise residential construction, mining and dredging.

 

Our Foodservice business is a leading broad-line manufacturer of “cold side” commercial food-service products. We design, manufacture and market full product lines of ice making machines, walk-in and reach-in refrigerators and freezers, fountain beverage delivery systems and other food-service refrigeration products for the lodging, restaurant, healthcare, convenience store, soft-drink bottling and institutional foodservice markets. Our Foodservice products are marketed under the Manitowoc, SerVend, Multiplex, Kolpak, Harford-Duracool, McCall, McCann’s, Koolaire, Flomatic, Kyees, RDI and other brand names.

 

Our Marine segment business new construction (commercial/government), ship repair and maintenance services for freshwater and saltwater vessels from three shipyards on the U.S. Great Lakes. Our Marine segment serves the Great Lakes maritime market consisting of U.S. and Canadian fleets, inland waterway operators and ocean going vessels that transit the Great Lakes and St. Lawrence Seaway.

 

Cranes and Related Products

 

Our Crane segment designs, manufactures and/or distributes a diversified line of crawler and truck mounted lattice-boom cranes, which we sell under the “Manitowoc” name. Our Crane segment also designs and manufactures a diversified line of top-slewing and self-erecting tower cranes, which we sell under the “Potain” name. We design and manufacture mobile telescopic cranes which we sell under the “Grove” name. We also design and manufacture a comprehensive line of hydraulically powered telescopic and articulated boom trucks, which we sell under the “National” brand name. We also provide crane product parts and services, and crane rebuilding and remanufacturing services which are delivered under the “Crane CARE” brand name. In some cases our products are manufactured for us or distributed for us under strategic alliances. Our crane products are used in a wide variety of applications throughout the world, including energy, petrochemical and industrial projects, infrastructure development such as road, bridge and airport construction, commercial and high-rise residential construction, mining and dredging. Many of our customers purchase one or more cranes together with several attachments to permit use of the crane in a broader range of lifting applications and other operations. Various crane models combined with available options have lifting capacities up to 1,433 U.S. tons.

 

Lattice-boom Cranes.  Under the Manitowoc brand name we design, manufacture and distribute lattice-boom crawler cranes. Lattice-boom cranes consist of a lattice-boom, which is a fabricated, high-strength steel structure that has four chords and tubular lacings, mounted on a base which is either crawler or truck mounted. Lattice-boom cranes weigh less and provide higher lifting capacities than a telescopic boom of similar length. The lattice-boom cranes are the only category of crane that can pick and move simultaneously. The lattice-boom sections, together with the crane base, are transported to and erected at a project site.

 

We currently offer models of lattice-boom cranes with lifting capacities up to 1,433 U.S. tons, which are used to lift material and equipment in a wide variety of applications and end markets, including heavy construction, bridge and highway, duty cycle and infrastructure and energy related projects. These cranes are also used by the crane rental industry, which serves all of the above end markets.

Lattice-boom crawler cranes may be classified according to their lift capacity — low capacity and high capacity. Low capacity crawler cranes with 150-U.S. ton capacity or less are often utilized for general construction and duty cycle applications. High capacity crawler cranes with greater than 150-ton capacity are utilized to lift materials in a wide variety of applications and are often utilized in heavy construction, energy-related projects, stadium construction, petrochemical work and dockside applications. We offer six low-capacity models and eight high-capacity models. We also manufacture lattice-boom, self-erecting truck cranes. These cranes serve the same markets as our high capacity crawler cranes. They differ from their crawler counterparts only in that they are mounted on a truck rather than a crawler and can travel at highway speeds.

 

We also offer our lattice-boom crawler crane customers various attachments that provide our cranes with greater capacity in terms of height, movement and lifting. Our principal attachments are: MAX-ER^tm attachment, luffing jibs and RINGER^® attachments. The MAX-ER is a trailing, counterweight, heavy-lift attachment that dramatically improves the reach, capacity and lift dynamics of the basic crane to which it is mounted. It can be transferred between cranes of the same model for maximum economy and occupies less space than competitive heavy-lift systems. A luffing jib is a fabricated structure similar to, but smaller than, a lattice-boom. Mounted at the tip of a lattice-boom, a luffing jib easily adjusts its angle of operation permitting one crane with a luffing jib to make lifts at additional locations on the project site. It can be transferred between cranes of the same model to maximize utilization. A RINGER attachment is a high-capacity lift attachment that distributes load reactions over a large area to minimize ground-bearing pressure. It can also be more economical than transporting and setting up a larger crane.

 

Tower Cranes.  Under the Potain brand name we design and manufacture tower cranes utilized primarily in the building and construction industry. Tower cranes offer the ability to lift and distribute material at the point of use more quickly and accurately than other types of lifting machinery without utilizing substantial square footage on the ground. Tower cranes include a stationary vertical tower and a horizontal jib with a counterweight, which is placed near the vertical tower. A cable runs through a trolley which is on the jib, enabling the load to move along the jib. The jib rotates 360 degrees, thus increasing the crane’s work area. Except when using a remote control device, operators occupy a cabin, located where the jib and tower meet, which provides superior visibility above the worksite. We offer a complete line of tower crane products, including top-slewing, luffing jib, topless, self-erecting and special cranes for dams, harbors and other large building projects. Top-slewing cranes are the most traditional form of tower cranes. Self-erecting cranes are bottom slewing cranes which have counterweight located at the bottom of the tower and which are able to be erected, used and dismantled on job sites without assist cranes.

 

Top-slewing tower cranes have a tower and multi-sectioned horizontal jib. These cranes rotate from the top of their mast and can increase in height with the project. Top-slewing cranes are transported in separate pieces and assembled at the construction site in one to three days depending on the height. We offer 37 models of top-slewing tower cranes with maximum jib lengths of 85 meters and lifting capabilities ranging between 40 and 3,600 meter-tons. These cranes are generally sold to medium to large building and construction groups, as well as rental companies.

 

Topless tower cranes are a type of top-slewing crane and, unlike all others, have no cathead or jib tie-bars on the top of the mast. The cranes are utilized primarily when overhead height is constrained or in situations where several cranes are installed close together. We currently offer seven models of topless tower cranes with maximum jib lengths of 75 meters and lifting capabilities ranging between 90 and 300 meter-tons.

 

Luffing jib tower cranes, which are a type of top-slewing crane, have an angled rather than horizontal jib. Unlike other tower cranes which have a trolley that controls the lateral movement of the load, luffing jib cranes move their load by changing the angle of the jib. The cranes are utilized primarily in urban areas where space is constrained or in situations where several cranes are installed close together. We currently offer seven models of luffing jib tower cranes with maximum jib lengths of 60 meters and lifting capabilities ranging between 90 and 600 meter-tons.

 

Self-erecting tower cranes are mounted on axles or transported on a low-loader trailer. One line of tower cranes is marked under the name Igo. The lower segment of the range (Igo cranes up to Igo36) unfolds in four sections, two for the tower and two for the jib. The smallest of our models unfolds in less than eight minutes; larger models erect in a few hours. Self-erecting cranes rotate from the bottom of their mast. We offer 25 models of self-erecting cranes

with maximum jib lengths of 50 meters and lifting capacities ranging between 10 and 120 meter-tons which are utilized primarily in low to medium rise construction and residential applications.

 

Mobile Telescopic Cranes.  Under the Grove brand name we design and manufacture 35 models of mobile telescopic cranes utilized primarily in industrial, commercial and construction applications, as well as in maintenance applications to lift and move material at job sites. Mobile telescopic cranes consist of a telescopic boom mounted on a wheeled carrier. Mobile telescopic cranes are similar to lattice-boom cranes in that they are designed to lift heavy loads using a mobile carrier as a platform, enabling the crane to move on and around a job site without typically having to re-erect the crane for each particular job. Additionally, many mobile telescopic cranes have the ability to drive between sites, and some are permitted on public roadways. We currently offer the following four types of mobile telescopic cranes capable of reaching tip heights of 427 feet with lifting capacities up to 550 tons: (1) rough-terrain, (2) all-terrain, (3) truck-mounted, and (4) industrial.

 

Rough-terrain cranes are designed to lift materials and equipment on rough or uneven terrain. These cranes cannot be driven on public roadways, and, accordingly, must be transported by truck to a work site. We produce, under the Grove brand name, 10 models of rough-terrain cranes capable of tip heights of up to 279 feet and maximum load capacities of up to 130 U.S. tons.

 

All-terrain cranes are versatile cranes designed to lift materials and equipment on rough or uneven terrain and yet are highly maneuverable and capable of highway speeds. We produce, under the Grove brand name, 14 models of all-terrain cranes capable of tip heights of up to 427 feet and maximum load capacities of up to 550 tons.

 

Truck-mounted cranes are designed to provide simple set-up and long reach high capacity booms and are capable of traveling from site to site at highway speeds. These cranes are suitable for urban and suburban uses. We produce, under the Grove brand name, four models of truck-mounted cranes capable of tip heights of up to 237 feet and maximum load capacities of up to 90 U.S. tons.

 

Industrial cranes are designed primarily for plant maintenance, storage yard and material handling jobs. We distribute, under the Grove brand name, eight models of industrial cranes capable of tip heights of up to 92 feet and maximum load capacities of up to 22 tons. On January 3, 2007 we acquired from our private label manufacturer all the rights to manufacture the industrial cranes.

 

Boom Trucks.  We offer our hydraulic and articulated boom truck products under the National Crane product line. A boom truck is a hydraulically powered telescopic crane or articulated crane mounted on a truck chassis. Telescopic boom trucks are used primarily for lifting material on a job site, while articulated boom trucks are utilized primarily to load and unload truck beds at a job site. We currently offer, under the National Crane brand name, 15 models of telescoping and eight models of articulating cranes capable of reaching maximum heights of 176 feet and lifting capacity up to 40 U.S. tons.

 

Backlog.  The backlog of crane products includes accepted orders that have been placed on a production schedule that we expect to be shipped and billed during the next year. Our backlog of unfilled orders for the Crane segment at September 30, 2007 was $2,653.4 million, as compared with $1,534.3 million and $866 million at December 31, 2006 and 2005, respectively.

 

Foodservice Equipment

 

Our Foodservice segment designs, manufactures and markets commercial ice-cube and flaker machines and storage bins; walk-in refrigerators and freezers; reach-in refrigerators and freezers; refrigerated undercounter and food preparation tables; ice/beverage dispensers; post-mix beverage dispensing valves; cast aluminum cold plates; carbonator tanks; long-draw beer dispensing systems; compressor racks and modular refrigeration systems; pumps; valves; and backroom beverage equipment distribution services. Products are sold under the brand names Manitowoc, SerVend, Multiplex, Kolpak, Harford-Duracool, McCall, McCann’s, Koolaire, Flomatic, Kyees, RDI and other brand names.

 

Ice-Cube Machines, Ice Flaker Machines and Storage Bins.  Ice machines are classified as either self-contained or modular machines and can be further classified by size, capacity and the type of ice they produce. There are two basic types of ice made by ice machines: cubes and flakes. Machines that make ice cubes, the most

popular type of machine, are used by the foodservice industry for drinks, ice displays and salad bars. Flake ice is used to a great extent in processing applications, such as keeping meats and seafood fresh, as well as in medical facilities for use in ice packs.

 

Our Manitowoc Ice, Inc. subsidiary manufactures 26 models of commercial ice machines under the Manitowoc and Snoball brand names, serving the foodservice, convenience store, healthcare, restaurant and lodging markets. Our ice machines make ice in cube and flake form, and range in daily production capacities from 45 to 2,150 pounds. The ice-cube machines are either self-contained units, which make and store ice, or modular units, which make but do not store ice. We offer the world’s only commercial ice making machines with patented cleaning and sanitizing technology. This feature eliminates the downtime and labor costs associated with periodic cleaning of the water distribution system. A majority of the units feature patented technology with environmentally friendly hydrofluorocarbon refrigerants. We also manufacture the patented QuietQube ice-cube machines, which feature CVD, or cool vapor defrost, technology, operate heat-free, are 75% quieter than non-CVD units and produce more ice in a smaller footprint. These QuietQube machines are ideally suited for use in new restaurants, which often feature more open designs, and for use with the self-service beverage systems increasingly found in quick service restaurants and convenience stores. Our ice machines are sold throughout North America, Europe and Asia.

 

Walk-in Refrigerators and Freezers.  We manufacture under the brand names Kolpak and Harford-Duracool. Products include modular and fully assembled walk-in refrigerators, coolers and freezers for restaurants, institutions, commissaries and convenience stores. Walk-in refrigerators and freezers are large, insulated storage spaces fitted with refrigeration systems. Most walk-ins are custom-made from modular insulated panels constructed with steel or aluminum exteriors and foamed-in-place urethane insulation. Refrigerator/blower units are installed in order to maintain an even temperature throughout the refrigerated space. Walk-ins come in many models with various types of doors, interior shelving and viewing windows. We also produce a complete line of express or pre-assembled walk-ins.

 

Reach-in Refrigerators and Freezers.  Reach-in refrigerators and freezers are typically constructed from stainless steel and have a thick layer of insulation in the walls, doors and floor. The cabinets have one to three doors, made of either glass or steel, and come in a variety of sizes with storage capabilities up to 72 cubic feet. Although reach-ins resembles household refrigerators, commercial versions utilize few plastic parts, incorporate larger compressor units and do not usually combine refrigerator and freezer compartments in the same unit. These design features stem from the heavy duty usage needs of most reach-ins by customers. For example, in contrast to the typical household refrigerator, commercial reach-ins may be opened and closed hundreds of times per day, placing mechanical strain on the structure and greatly increasing the cooling load on the refrigeration system. We market these products under our McCall, Kolpak and Koolaire brand names. We offer over 60 self-contained upright and under-counter refrigeration equipment units, including a full line of reach-ins and refrigerated food preparation equipment for restaurants, institutions and commissaries. We also manufacture custom-built units for select national chains restaurants.

 

Beverage Dispensers and Other Products.  Our Manitowoc Beverage Equipment, Inc. subsidiary produces beverage dispensers, ice/beverage dispensers, post-mix dispensing valves, cast aluminum cold plates and related equipment for use by quick service restaurants, convenience stores, bottling operations, movie theaters and the soft-drink industry. Ice/beverage dispensers include traditional combination ice/beverage dispensers, drop-in dispensers and electric countertop units. Dispensing systems are manufactured for the dispensing of soda, juice, water, beer and other specialty drinks. Soda systems include remote systems that produce cold carbonated water and chill incoming water and syrup prior to delivery to dispensing towers.

 

Beer systems offer technically advanced remote beer delivery systems which are superior by design, allow increased yields, provide better under-bar space utilization and allow multiple stations to operate from one central unit.

 

Our subsidiary, Manitowoc Beverage Systems, Inc., or MBS, is a systems integrator with nationwide distribution of beverage dispensing and backroom equipment and support system components. MBS serves the needs of major beverage and bottler customers, restaurants, convenience stores and other outlets and provides our customers with one point of contact for their beverage dispenser and backroom equipment needs. It operates throughout the United States, with locations in Ohio, California and Virginia.

On May 26, 2006, we acquired substantially all of the net assets and business operated by McCann’s. Headquartered in Los Angeles, California, and with a manufacturing location in Tijuana, Mexico, McCann’s is engaged in the design, manufacture and sale of beverage dispensing equipment primarily used in fast food restaurants, stadiums, cafeterias and convenience stores. McCann’s primary products are backroom beverage equipment such as carbonators, water boosters and racks. McCann’s also produces accessory components for beverage dispensers including specialty valves, stands and other stainless steel components.

 

Backlog.  The backlog for unfilled orders for our Foodservice segment at September 30, 2007, December 31, 2006 and 2005 was not significant because orders are generally filled within 24 to 48 hours.

 

Marine

 

We operate three shipyards located in Marinette, Wisconsin; Sturgeon Bay, Wisconsin; and Cleveland, Ohio.

 

Marinette, Wisconsin.  Marinette Marine Corporation was founded along the Menominee River in Marinette, Wisconsin in 1942 to meet America’s growing need for naval construction. Since its first contract to build five wooden barges, Marinette has built more than 1,300 vessels. Marinette is a full service shipyard with in-house capabilities to design and construct the most complex military and commercial vessels. The Marinette facility has 300,000 square feet of heated in-door production area, 53,000 square feet of secure indoor warehouse and receiving area, a 4,500 long ton certified ship launch ways and a 1,600 ton ship transport system. These features of the Marinette facility allow the vessels to be constructed and outfitted completely indoors. When ready for launching, they are moved outdoors. Typically, vessels are significantly material and labor complete when launched which allows for high quality of finished product and greater manufacturing efficiency.

 

Sturgeon Bay, Wisconsin.  Located in Sturgeon Bay, Wisconsin, Bay Shipbuilding Co. is an industry leader in the construction of Oil Pollution Act 90 double-hulled tank vessels, articulated tug and barge units, dredges, and dredging support equipment, along with bulk cargo self unloading solutions. This shipyard specializes in large ship construction projects and repair work. Our Sturgeon Bay shipyard consists of approximately 55 acres of waterfront property, approximately 295,000 square feet of enclosed manufacturing and office space, a 140-foot by 1,158-foot graving dock, a 250-foot graving dock and a 600-foot, 7,000-ton, floating dry dock.

 

Cleveland, Ohio.  Cleveland Shiprepair Company specializes in all types of voyage and topside marine repair.

 

Backlog.  The year-end backlog for our Marine segment includes new project work to be completed over a series of years and repair and maintenance work presently scheduled which will be completed in the next year. At September 30, 2007, the backlog for our Marine segment approximated $260 million, compared to $422 million and $152 million at December 31, 2006 and 2005, respectively. The backlog is primarily made up of new vessel construction projects and does not include options for additional vessels, yet to be awarded.

 

Raw Materials and Supplies

 

The primary raw materials that we use are structural and rolled steel, aluminum and copper, which is purchased from various domestic and international sources. We also purchase engines and electrical equipment and other semi-and fully-processed materials. Our policy is to maintain, wherever possible, alternate sources of supply for our important materials and parts. We maintain inventories of steel and other purchased material. We have been successful in our goal to maintain alternative sources of raw materials and supplies, and therefore are not dependent on a single source for any particular raw material or supply.

 

Patents, Trademarks, and Licenses

 

We hold numerous patents pertaining to our crane and foodservice products, and have presently pending applications for additional patents in the United States and foreign countries. In addition, we have various registered and unregistered trademarks and licenses that are of material importance to our business and believe our ownership of this intellectual property is adequately protected in customary fashions under applicable law. No single patent, trademark or license is critical to our overall business.

Seasonality

 

Typically, the second and third quarters represent our best quarters for our consolidated financial results. In our Crane segment, summer represents the main construction season. Customers require new machines, parts and service during that season. Since the summer brings warmer weather, there is also an increase in the use and replacement of ice machines, as well as new construction and remodeling within the foodservice industry. As a result, distributors build inventories during the second quarter for the increased demand. More recently, due to the strengthening end markets for our Crane segment, the traditional seasonality has been slightly muted due to strong cyclical demand, as well as more diversified product and geographic end markets. In our Marine segment, the Great Lakes shipping industry’s sailing season is normally April through December. Thus, barring any emergency grounding, the majority of repair and maintenance work is performed during the winter months and the work is typically completed during the first and second quarter of the year. As a result our overall increase in new construction project work in our Marine segment, the seasonality of our traditional repair and maintenance work is less extreme as new construction projects are performed throughout the year.

 

Competition

 

We sell all of our products in highly competitive industries. We compete in each of our industries based on product design, quality of products and aftermarket support services, product performance, maintenance costs and price. Our competitors may have greater financial, marketing, manufacturing or distribution resources than we do. We believe that we benefit from the following competitive advantages: a strong brand name, a reputation for quality products and aftermarket support services, an established network of global distributors, broad product line offerings in the markets we serve, and a commitment to engineering design and product innovation. However, we cannot be certain that our products and services will continue to compete successfully with our competitors or that we will be able to retain our customer base or improve or maintain our profit margins on sales to our customers.

 

Engineering, Research and Development

 

Our extensive engineering, research and development capabilities have been key drivers of our success. We engage in research and development activities at all of our significant manufacturing facilities. We have a staff of engineers and technicians on three continents that are responsible for improving existing products and developing new products. We incurred research and development expenditures of $31.2 million in 2006, $26.0 million in 2005 and $21.2 million in 2004.

 

Our team of engineers focuses on developing innovative, high performance, low maintenance products that are intended to create significant brand loyalty among customers. Design engineers work closely with our manufacturing and marketing staff, enabling us to identify quickly changing end-user requirements, implement new technologies and effectively introduce product innovations. Close, carefully managed relationships with dealers, distributors and end users help us identify their needs, not only for products, but for the service and support that is critical to their profitable operations. As part of our ongoing commitment to provide superior products, we intend to continue our efforts to design products that meet evolving customer demands and reduce the period from product conception to product introduction.

 

Employee Relations

 

We employ over 10,000 persons worldwide and have labor agreements with 12 union locals in North America. In addition, a large majority of our European employees belong to European trade unions. There were no work stoppages during 2007, 2006, 2005 or 2004, however, the following work stoppages occurred during 2003 and 2002:

 

 

In September, 2007, we entered into a new collective bargaining contract at Marinette Marine Corporation, which replaced the prior contract, which expired March, 2007.

 

MANAGEMENT

 

Each of the following officers of the company has been elected by the Board of Directors. The information presented is as of September 30, 2007.

 

 

Glen E. Tellock has been the company’s president and chief executive officer since April 2007. Previously, he served as the company’s senior vice president and president of Manitowoc Crane Group (2002 to 2007), our senior vice president and chief financial officer (1999 to 2002), our vice president of finance and treasurer (1998 to 1999), our corporate controller (1992 to 1998) and our director of accounting (1991 to 1992). Prior to joining the company, Mr. Tellock served as financial planning manager with the Denver Post Corporation and as audit manager for Ernst & Whinney.

 

Carl J. Laurino was named senior vice president and chief financial officer in May 2004. He had served as Treasurer since May 2001. Mr. Laurino joined our company in January 2000 as assistant treasurer and served in that capacity until his promotion to treasurer. Previously, Mr. Laurino spent 15 years in the commercial banking industry with Firstar Bank (now known as US Bank), Norwest Bank (now known as Wells Fargo) and Associated Bank. During that period, Mr. Laurino held numerous positions of increasing responsibility including commercial loan officer with Norwest Bank, Vice President — Business Banking with Associated Bank and Vice President and Commercial Banking Manager with Firstar.

 

Thomas G. Musial has been senior vice president of human resources and administration since 2000. Previously, he was vice president of human resources and administration (1995 to 2000), manager of human resources (1987 to 1995) and personnel/industrial relations specialist (1976 to 1987).

 

Maurice D. Jones has been general counsel and secretary since 1999 and was elected vice president in 2002 and a senior vice president in 2004. Prior to joining the company, Mr. Jones was a partner in the law firm of Davis and Kuelthau, S.C. and served as legal counsel for Banta Corporation.

 

Dean J. Nolden was named vice president of finance and assistant treasurer in May 2005. Mr. Nolden joined the company in November 1998 as corporate controller and served in that capacity until his promotion to Vice President Finance and Controller in May 2004. Prior to joining the company, Mr. Nolden spent eight years in public accounting in the audit practice of PricewaterhouseCoopers LLP. He left that firm in 1998 as an audit manager.

 

Eric P. Etchart has been the senior vice president of our company and president of Manitowoc Crane Group since April 2007. Previously, he served as executive vice president of Manitowoc Crane Group for the Asia/Pacific region since 2002. Prior to joining Manitowoc, Mr. Etchart served as managing director in the Asia/Pacific region for Potain S.A.; as managing director in Italy for Potain S.P.A.; and as vice president of international sales and marketing for PPM.

 

Michael J. Kachmer joined our company in February 2007 as senior vice president of our company and president/general manager of Manitowoc Foodservice Group. Prior to joining us, Mr. Kachmer served as chief operating officer at Culligan International Company and prior to that held numerous positions of increasing importance with Culligan International Company. In addition, Mr. Kachmer previously held management,

operational and executive positions with Algroup Wheaton, Van Leer Containers, Ball Corporation and Firestone Tire & Rubber Company.

 

Robert P. Herre joined our company in February 2005 as senior vice president of The Manitowoc Company, Inc. and president of Manitowoc Marine Group. Prior to joining the company, Mr. Herre served as executive vice president and head of operations for Trinity Marine Group, joining that company in 2003. From 1991 to 2003, Mr. Herre held numerous positions within American Commercial Lines, LLC, including president and chief operating officer Jeffboat, vice president maintenance and vessel management American Commercial Barge Line, vice president and general manager American Commercial Terminals, vice president, employee relations Jeffboat and vice president, engineering.

 

Effective April 30, 2007, Terry D. Growcock, who had served as our president and chief executive officer since 1998 and our chairman since 2002, retired from his positions as president and chief executive officer. Mr. Growcock continues to serve as our chairman.

 

DESCRIPTION OF CAPITAL STOCK

 

Our articles of incorporation provide that we have the authority to issue 300 million shares of $0.01 par value common stock and 3.5 million shares of $0.01 par value preferred stock. The following is a summary of the material provisions of our common stock and preferred stock. This summary does not purport to be exhaustive and is qualified in its entirety by reference to applicable Wisconsin law and our articles of incorporation and by-laws, which are incorporated by reference as exhibits to this registration statement.

 

Common Stock

 

As of November 12, 2007, we had 125,827,164 shares of common stock issued and outstanding. All of our issued and outstanding shares are fully paid and nonassessable (subject to the personal liability which may be imposed upon a shareholder of Wisconsin corporations by former Section 180.0622(2)(b) of the Wisconsin Business Corporation Law, as judicially interpreted, for debts incurred prior to June 14, 2006 owing to employees for services performed, but not exceeding six months service in any one case).

 

After all cumulative dividends have been paid or declared and set apart for payment on any shares of preferred stock that are outstanding, our common stock is entitled to such dividends as may be declared from time to time by our board of directors in accordance with applicable law.

 

Except as provided under Wisconsin law and except as may be determined by our board of directors with respect to any series of preferred stock, only the holders of our common stock will be entitled to vote for the election of members to our board of directors and on all other matters. Holders of our common stock are entitled to one vote per share of common stock held by them on all matters properly submitted to a vote of shareholders, subject to Section 180.1150 of the Wisconsin Business Corporation Law. Please see “Certain Statutory Provisions — Control Share Voting Restrictions” below. Shareholders have no cumulative voting rights, which means that the holders of shares entitled to exercise more than 50% of the voting power are able to elect all of the directors to be elected.

 

All shares of our common stock are entitled to participate equally in distributions in liquidation, subject to the prior rights of any preferred stock that may be outstanding. Holders of our common stock have no preemptive rights to subscribe for or purchase our shares. There are no conversion rights, sinking fund or redemption provisions applicable to our common stock.

 

The transfer agent for our common stock is Computershare Trust Company, N.A.

 

Preferred Stock

 

Under our articles of incorporation, our board of directors has the authority, without further action by our shareholders, to issue up to 3.5 million shares of preferred stock in one or more series and to fix the variations in the powers, preferences, rights, qualifications, limitations or restrictions of the preferred stock, including dividend rights, conversion rights, voting rights, terms of redemption and liquidation preferences, any or all of which may be greater than the rights of our common stock. Our board of directors, without shareholder approval, can issue preferred stock with voting, conversion or other rights that could adversely affect the voting power and other rights of the holders of our common stock. As a result, preferred stock could be issued quickly with terms that will delay or prevent a change of control or make removal of management more difficult. In addition, the issuance of preferred stock may have the effect of decreasing the market price of our common stock and may adversely affect the voting and other rights of our common stock. At present, there are no shares of preferred stock outstanding and we have no current plans to issue any shares of preferred stock.

 

Common Stock Purchase Rights

 

We have entered into a rights agreement, dated as of March 21, 2007, with Computershare Trust Company, N.A., pursuant to which each outstanding share of our common stock has an attached right to purchase one share of our common stock. Each share of our common stock subsequently issued prior to the expiration of the rights agreement will likewise have an attached right. Under circumstances described below, the rights will entitle the holder thereof to purchase additional shares of our common stock. In this registration statement, unless the context requires otherwise, all references to our common stock include the accompanying rights.

Currently, the rights are not exercisable and trade with our common stock. The rights will become exercisable only if a person or group has acquired, or announced an intention to acquire, 20% or more of our outstanding common stock. The rights, until they are exercised, do not have voting or dividend rights. The rights will expire on March 29, 2017, unless earlier redeemed or exchanged by the Company pursuant to the rights agreement.

 

If the rights become exercisable, each right, unless held by a person or group that beneficially owns more than 20% of our outstanding common stock, will initially entitle the holder to purchase one share of our common stock at a purchase price of $110.00, subject to adjustment. Under some circumstances, including the existence of a 20% acquiring party, each holder of a right, other than the acquiring party, will be entitled to purchase at the right’s then-current exercise price, shares of our common stock having a market value of two times the exercise price. If another corporation acquires us after a party acquires 20% or more of our common stock, each holder of a right will be entitled to receive the acquiring corporation’s common shares having a market value of two times the exercise price.

 

Each right may be redeemed at a price of $0.01 until a party acquires 20% or more of our common stock and, after that time, may be exchanged for one share of our common stock per right until a party acquires 50% or more of our common stock. Under the rights agreement, our board of directors may reduce the thresholds applicable to the rights to not less than the greater of (i) the sum of .001% and the largest percentage of the outstanding shares of common stock then known to us to be beneficially owned by any person or group of affiliated or associated persons and (ii) 10%.

 

The foregoing discussion is only a summary of the rights and the Rights Agreement, and is qualified in its entirety by reference to the rights agreement, which is incorporated by reference as an exhibit to this registration statement.

 

Certain Statutory Provisions

 

Business Combination Statute.  Sections 180.1140 to 180.1144 of the Wisconsin Business Corporation Law regulate a broad range of business combinations between a “resident domestic corporation” and an “interested shareholder.” A business combination is defined to include any of the following transactions:

 

 

A “resident domestic corporation” is defined to mean a Wisconsin corporation that has a class of voting stock that is registered or traded on a national securities exchange or that is registered under Section 12(g) of the Securities Exchange Act and that, as of the relevant date, satisfies any of the following:

 

 

Manitowoc is a resident domestic corporation for purposes of these statutory provisions.

 

An interested shareholder is defined to mean a person who beneficially owns, directly or indirectly, 10% of the voting power of the outstanding voting stock of a resident domestic corporation or who is an affiliate or associate of the resident domestic corporation and beneficially owned 10% of the voting power of its then outstanding voting stock within the last three years.

Under this law, we cannot engage in a business combination with an interested shareholder for a period of three years following the date such person becomes an interested shareholder, unless the board of directors approved the business combination or the acquisition of the stock that resulted in the person becoming an interested shareholder before such acquisition. We may engage in a business combination with an interested shareholder after the three-year period with respect to that shareholder expires only if one or more of the following conditions is satisfied:

 

 

Fair Price Statute.  The Wisconsin Business Corporation Law also provides, in Sections 180.1130 to 180.1133, that certain mergers, share exchanges or sales, leases, exchanges or other dispositions of assets in a transaction involving a significant shareholder and a resident domestic corporation such as us require a supermajority vote of shareholders in addition to any approval otherwise required, unless shareholders receive a fair price for their shares that satisfies a statutory formula. A “significant shareholder” for this purpose is defined as a person or group who beneficially owns, directly or indirectly, 10% or more of the voting stock of the resident domestic corporation, or is an affiliate of the resident domestic corporation and beneficially owned, directly or indirectly, 10% or more of the voting stock of the resident domestic corporation within the last two years. Any such business combination must be approved by 80% of the voting power of the resident domestic corporation’s stock and at least two-thirds of the voting power of its stock not beneficially owned by the significant shareholder who is party to the relevant transaction or any of its affiliates or associates, in each case voting together as a single group, unless the following fair price standards have been met:

 

 

 

 

Control Share Voting Restrictions.  Under Section 180.1150 of the Wisconsin Business Corporation Law, unless otherwise provided in the articles of incorporation or otherwise specified by the board of directors, the voting power of shares of a resident domestic corporation held by any person or group of persons acting together in excess of 20% of the voting power in the election of directors is limited (in voting on any matter) to 10% of the full voting power of those shares. This restriction does not apply to shares acquired directly from the resident domestic corporation, in certain specified transactions, or in a transaction in which the corporation’s shareholders have approved restoration of the full voting power of the otherwise restricted shares. Our articles do not provide otherwise.

 

Defensive Action Restrictions.  Section 180.1134 of the Wisconsin Business Corporation Law provides that, in addition to the vote otherwise required by law or the articles of incorporation of a resident domestic corporation, the approval of the holders of a majority of the shares entitled to vote is required before such corporation can take

certain action while a takeover offer is being made or after a takeover offer has been publicly announced and before it is concluded. This statute requires shareholder approval for the corporation to do either of the following:

 

 

We currently have more than three independent directors. The foregoing restrictions may have the effect of deterring a shareholder from acquiring our shares with the goal of seeking to have us repurchase such shares at a premium over market price.

 

THE UNDERWRITER

 

Under the terms and subject to the conditions in an underwriting agreement dated the date of this prospectus supplement, Morgan Stanley & Co. Incorporated has agreed to purchase, and we have agreed to sell to the underwriter, 4,000,000 shares of common stock.

 

The underwriter is offering the shares of common stock subject to its acceptance of the shares from us and subject to prior sale. The underwriting agreement provides that the obligation of the underwriter to pay for and accept delivery of the shares of common stock offered by this prospectus supplement is subject to the approval of certain legal matters by its counsel and to certain other conditions. The underwriter is obligated to take and pay for all of the shares of common stock offered by this prospectus supplement if any such shares are taken.

 

The underwriter initially proposes to offer part of the shares of common stock directly to the public at the offering price listed on the cover page of this prospectus supplement and part to certain dealers. After the initial offering of the shares of common stock, the offering price and other selling terms may from time to time be varied by the underwriter.

 

The estimated offering expenses payable by us, exclusive of the underwriting discount and commission, are approximately $250,000.

 

We and our directors and executive officers a have agreed that, without the prior written consent of the underwriter, we and they will not, during the period ending 30 days after the date of this prospectus supplement:

 

 

whether any such transaction described above is to be settled by delivery of common stock or such other securities, in cash or otherwise. In addition, we and each such person agrees that, without the prior written consent of the underwriter, it will not, during the period ending 30 days after the date of this prospectus supplement, make any demand for, or exercise any right with respect to, the registration of any shares of common stock or any security convertible into or exercisable or exchangeable for common stock.

 

The restrictions described in the immediately preceding paragraph to do not apply to:

 

 

In order to facilitate the offering of the common stock, the underwriter may engage in transactions that stabilize, maintain or otherwise affect the price of the common stock. Specifically, the underwriter may sell more shares than it is obligated to purchase under the underwriting agreement, creating a naked short position. The underwriters must close out any naked short position by purchasing shares in the open market. A naked short position is more likely to be created if the underwriter is concerned that there may be downward pressure on the price of the common stock in the open market after pricing that could adversely affect investors who purchase in this offering. As an additional means of facilitating this offering, the underwriter may bid for, and purchase, shares of common stock in the open market to stabilize the price of the common stock. These activities may raise or maintain the market price of the common stock above independent market levels or prevent or retard a decline in the market

price of the common stock. The underwriter is not required to engage in these activities and may end any of these activities at any time.

 

We and the underwriter have agreed to indemnify each other against certain liabilities, including liabilities under the Securities Act of 1933, as amended.

 

A prospectus in electronic format will be made available on a website maintained by the underwriter. The underwriter may allocate a number of shares of common stock for sale to its online brokerage account holders. The underwriter may make Internet distributions on the same basis as other allocations.

 

European Economic Area

 

In relation to each Member State of the European Economic Area which has implemented the Prospectus Directive, the underwriter has represented and agreed that with effect from and including the date on which the Prospectus Directive is implemented in that Member State it has not made and will not make an offer of shares to the public in that Member State, except that it may, with effect from and including such date, make an offer of shares to the public in that Member State:

 

(a) at any time to legal entities which are authorised or regulated to operate in the financial markets or, if not so authorised or regulated, whose corporate purpose is solely to invest in securities;

 

(b) at any time to any legal entity which has two or more of (1) an average of at least 250 employees during the last financial year; (2) a total balance sheet of more than €43,000,000 and (3) an annual net turnover of more than €50,000,000, as shown in its last annual or consolidated accounts; or

 

(c) at any time in any other circumstances which do not require the publication by us of a prospectus pursuant to Article 3 of the Prospectus Directive.

 

For the purposes of the above, the expression an “offer of shares to the public” in relation to any shares in any Member State means the communication in any form and by any means of sufficient information on the terms of the offer and the shares to be offered so as to enable an investor to decide to purchase or subscribe the shares, as the same may be varied in that Member State by any measure implementing the Prospectus Directive in that Member State and the expression Prospectus Directive means Directive 2003/71/EC and includes any relevant implementing measure in that Member State.

 

United Kingdom

 

The underwriter has represented and agreed that it has only communicated or caused to be communicated and will only communicate or cause to be communicated an invitation or inducement to engage in investment activity (within the meaning of Section 21 of the Financial Services and Markets Act 2000) in connection with the issue or sale of the shares in circumstances in which Section 21(1) of such Act does not apply to us and it has complied and will comply with all applicable provisions of such Act with respect to anything done by it in relation to any shares in, from or otherwise involving the United Kingdom.

 

LEGAL MATTERS

 

Foley & Lardner LLP, Milwaukee, Wisconsin, will pass upon certain legal matters relating to this offering. Cahill Gordon & Reindel LLP, New York, New York, will pass upon certain legal matters relating to this offering for the underwriter.

 

EXPERTS

 

The financial statements and management’s assessment of the effectiveness of internal control over financial reporting (which is included in Management’s Report on Internal Control over Financial Reporting) incorporated in this prospectus by reference to The Manitowoc Company, Inc.’s Annual Report on Form 10-K for the year ended December 31, 2006 have been so incorporated in reliance on the report of PricewaterhouseCoopers LLP, an independent registered public accounting firm, given on the authority of said firm as experts in auditing and accounting.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

We file annual, quarterly and current reports and other information with the SEC. Our SEC filings (File No. 001-11978) are available to the public over the Internet at the SEC’s web site at http://www.sec.gov. You may also read and copy any document we file at the SEC’s public reference room at 100 F Street, N.E., Washington, D.C. 20549. You can call the SEC at 1-800-732-0330 for further information about the public reference room.

 

We are “incorporating by reference” specified documents that we file with the SEC, which means:

 

 

We incorporate by reference the documents listed below and any future filings we make with the SEC under Sections 13(a), 13(c), 14 or 15(d) of the Securities Exchange Act of 1934 after the date of this prospectus and before the end of the offering of the securities pursuant to this prospectus:

 

PROSPECTUS

 

 

 

 

 

The Manitowoc Company, Inc.

 

Debt Securities

Common Stock

Preferred Stock

Warrants

Stock Purchase Contracts

Stock Purchase Units

 

 

 

 

By this prospectus, we may offer and sell from time to time our securities in one or more classes or series and in amounts, at prices and on terms that we will determine at the times of the offerings. In addition, selling shareholders to be named in a prospectus supplement may offer and sell from time to time shares of our common stock in such amounts as set forth in a prospectus supplement. Unless otherwise set forth in a prospectus supplement, we will not receive any proceeds from the sale of shares of our common stock by any selling shareholders.

 

We will provide specific terms of the securities, including the offering prices, in one or more supplements to this prospectus. The supplements may also add, update or change information contained in this prospectus. You should read this prospectus and the prospectus supplement relating to the specific issue of securities carefully before you invest.

 

We may offer the securities independently or together in any combination for sale directly to purchasers or through underwriters, dealers or agents to be designated at a future date. The supplements to this prospectus will provide the specific terms of the plan of distribution.

 

Our common stock is traded on the New York Stock Exchange under the symbol “MTW.”

 

Investment in our securities involves risks. See “Risk Factors” in our most recent Annual Report on Form 10-K and in any applicable prospectus supplement and/or other offering material for a discussion of certain factors which should be considered in an investment of the securities which may be offered hereby.

 

 

 

 

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

 

 

 

 

 

The date of this prospectus is November 14, 2007.

 

TABLE OF CONTENTS

 

 

ABOUT THIS PROSPECTUS

 

In this prospectus, “we,” “us,” “our” or “ours” refer to The Manitowoc Company, Inc.

 

This prospectus is part of a registration statement that we filed with the Securities and Exchange Commission, or SEC, utilizing a “shelf” registration process. Under this shelf process, we may, from time to time, sell the securities or combinations of the securities described in this prospectus in one or more offerings. This prospectus provides you with a general description of the securities that we may offer and the shares of our common stock that selling shareholders may offer. Each time we offer securities, we will provide a prospectus supplement that will contain specific information about the terms of that offering. The prospectus supplement may also add, update or change information contained in this prospectus. You should read both this prospectus and any prospectus supplement together with additional information described under the heading “Where You Can Find More Information.”

 

You should rely only on the information contained or incorporated by reference in this prospectus and in any prospectus supplement or other offering material. We have not authorized any other person to provide you with different information. If anyone provides you with different or inconsistent information, you should not rely on it. We are not making offers to sell or solicitations to buy the securities in any jurisdiction in which an offer or solicitation is not authorized or in which the person making that offer or solicitation is not qualified to do so or to anyone to whom it is unlawful to make an offer or solicitation. You should not assume that the information in this prospectus, any prospectus supplement or other offering material, as well as the information we previously filed with the SEC that we incorporate by reference in this prospectus or any prospectus supplement, is accurate as of any date other than its respective date. Our business, financial condition, results of operations and prospects may have changed since those dates.

 

FORWARD-LOOKING STATEMENTS

 

Statements included or incorporated by reference into this document that are not historical facts are forward-looking statements, which are based upon our current expectations. These statements involve risks and uncertainties that could cause actual results to differ materially from what appears within this document. Forward-looking statements include descriptions of plans and objectives for future operations, and the assumptions behind those plans. The words “anticipates,” “believes,” “intends,” “estimates,” and “expects,” or similar expressions, usually identify forward-looking statements. Any and all projections of future performance are forward-looking statements. In addition to the assumptions, uncertainties and other information referred to specifically in the forward-looking statements, a number of factors relating to each business segment could

cause actual results to be significantly different from what is presented in this document or in the documents incorporated by reference into this document. Those factors include, without limitation, the following:

 

Crane — market acceptance of new and innovative products; cyclicality of the construction industry; the effects of government spending on construction-related projects throughout the world; changes in world demand for our crane product offering; the replacement cycle of technologically obsolete and worn out cranes; demand for used equipment; actions of competitors; and foreign exchange rate risk.

 

Foodservice — market acceptance of new and innovative products; weather; consolidations within the restaurant and foodservice equipment industries; global expansion of customers; actions of competitors; the commercial ice-cube machine replacement cycle in the United States; specialty foodservice market growth; future strength of the beverage industry; and the demand for quickservice restaurants and kiosks.

 

Marine — shipping volume fluctuations based on performance of the steel industry; weather and water levels on the Great Lakes; trends in government spending on new vessels; government and military decisions relating to new and existing vessel construction programs; five-year survey schedule; the replacement cycle of older marine vessels; growth of existing marine fleets; consolidation of the Great Lakes marine industry; frequency of casualties on the Great Lakes; and the level of construction and industrial maintenance.

 

Corporate (including factors that may affect all three segments) — changes in laws and regulations throughout the world; the state of financial and credit markets; the ability to finance, complete and/or successfully integrate, restructure and consolidate acquisitions, divestitures, strategic alliances and joint ventures; successful and timely completion of new facilities and facility expansions; competitive pricing; availability of certain raw materials; changes in raw materials and commodity prices; availability of local suppliers and skilled labor; efficiencies and capacity utilization at our facilities; changes in domestic and international economic and industry conditions, including steel industry conditions; changes in the interest rate environment; risks associated with growth; foreign currency fluctuations; world-wide political risk; health epidemics; pressure of additional financing leverage resulting from acquisitions; unanticipated issues in increasing manufacturing efficiencies; changes in revenue, margins and costs; work stoppages, labor negotiations and labor rates; and the ability of our customers to obtain financing.

 

We urge you to consider these factors and to review carefully the section titled “Risk Factors” in our most recent Annual Report on Form 10-K, any applicable prospectus supplement or other offering material and/or any other document that we file with the SEC before investing in our securities. The forward-looking statements included in this document or in the documents incorporated by reference into this document are made only as of the date of this document or the date of the incorporated document, and we undertake no obligation to publicly update these statements to reflect subsequent events or circumstances.

 

THE MANITOWOC COMPANY, INC.

 

We are a diversified industrial manufacturer with leading positions in our three principal markets: Cranes and Related Products (“Crane”), Foodservice Equipment (“Foodservice”) and Marine. We are a Wisconsin corporation with our principal offices located at 2400 South 44th Street, Manitowoc, WI 54220, telephone (920) 684-4410. We have over a 105-year tradition of providing high-quality, customer-focused products and support services to our markets worldwide.

 

Our Crane business is a global provider of engineered lift solutions, offering what we believe is one of the broadest lines of lifting equipment in our industry. We design, manufacture, market and support a comprehensive line of crawler cranes, mobile telescopic cranes, tower cranes and boom trucks. Our Crane products are marketed under the Manitowoc, Grove, Potain, National, Crane CARE and other brand names and are used in a wide variety of applications, including energy, petrochemical and industrial projects, infrastructure development such as road, bridge and airport construction, commercial and high-rise residential construction, mining and dredging.

Our Foodservice business is a leading broad-line manufacturer of “cold side” commercial foodservice products. We design, manufacture and market full product lines of ice making machines, walk-in and reach-in refrigerators and freezers, fountain beverage delivery systems and other foodservice refrigeration products for the lodging, restaurant, healthcare, convenience store, soft-drink bottling and institutional foodservice markets. Our Foodservice products are marketed under the Manitowoc, SerVend, Multiplex, Kolpak, Harford-Duracool, McCall, McCann’s, Koolaire, Flomatic, Kyees, RDI and other brand names.

 

Our Marine business provides new construction (commercial/government), ship repair and maintenance services for freshwater and saltwater vessels from three shipyards on the U.S. Great Lakes. Our Marine segment serves the Great Lakes maritime market consisting of U.S. and Canadian fleets, inland waterway operators and ocean going vessels that transit the Great Lakes and St. Lawrence Seaway.

 

SELLING SHAREHOLDERS

 

We may register shares of common stock covered by this prospectus for re-offers and resales by any selling shareholders to be named in a prospectus supplement. Because we are a well-known seasoned issuer, as defined in Rule 405 of the Securities Act of 1933, we may add secondary sales of shares of our common stock by any selling shareholders by filing a prospectus supplement with the SEC. We may register these shares to permit selling shareholders to resell their shares when they deem appropriate. A selling shareholder may resell all, a portion or none of such shareholder’s shares at any time and from time to time. Selling shareholders may also sell, transfer or otherwise dispose of some or all of their shares of our common stock in transactions exempt from the registration requirements of the Securities Act. We do not know when or in what amounts the selling shareholders may offer shares for sale under this prospectus and any prospectus supplement. We may pay all expenses incurred with respect to the registration of the shares of common stock owned by the selling shareholders, other than underwriting fees, discounts or commissions, which will be borne by the selling shareholders. We will provide you with a prospectus supplement naming the selling shareholders, the amount of shares to be registered and sold and any other terms of the shares of common stock being sold by each selling shareholder.

 

USE OF PROCEEDS

 

We intend to use the net proceeds from the sales of the securities as set forth in the applicable prospectus supplement and/or other offering material.

 

RATIOS OF EARNINGS TO FIXED CHARGES

 

The following table presents our ratios of consolidated earnings to fixed charges for the periods presented.

 

 

For purposes of computing the ratio of earnings to fixed charges, earnings consist of earnings from continuing operations before income taxes and fixed charges, excluding capitalized interest. Fixed charges consist of interest expensed and capitalized, amortization of debt issuance costs and the interest component of rent expense.

 

DESCRIPTION OF SECURITIES

 

We may offer debt securities, shares of common stock, shares of preferred stock, warrants, stock purchase contracts and stock purchase units. We will set forth in the applicable prospectus supplement a description of the securities that may be offered under this prospectus. The terms of the offering of securities, the initial offering price and the net proceeds to us will be contained in the prospectus supplement and/or other offering material relating to such offering.

 

WHERE YOU CAN FIND MORE INFORMATION

 

We file annual, quarterly and current reports, proxy statements and other information with the SEC. We also filed a registration statement on Form S-3, including exhibits, under the Securities Act of 1933 with respect to the securities offered by this prospectus. This prospectus is a part of the registration statement, but does not contain all of the information included in the registration statement or the exhibits. You may read and copy the registration statement and any other document that we file at the SEC’s public reference room at 100 F Street, N.E., Washington D.C. 20549. You can call the SEC at 1-800-SEC-0330 for further information on the operation of the public reference room. You can also find our public filings with the SEC on the internet at a web site maintained by the SEC located at http://www.sec.gov.

 

We are “incorporating by reference” specified documents that we file with the SEC, which means:

 

 

We incorporate by reference the documents listed below and any future filings we make with the SEC under Sections 13(a), 13(c), 14 or 15(d) of the Securities Exchange Act of 1934 after the date of this prospectus and before the end of the offering of the securities pursuant to this prospectus:

 

 

You may request a copy of any of these filings, at no cost, by request directed to us at the following address or telephone number:

 

The Manitowoc Company, Inc.
2400 South 44th Street
Manitowoc, Wisconsin 54221-0066
(920) 684-4410
Attention: General Counsel

 

You can also find these filings on our website at www.manitowoc.com. However, we are not incorporating the information on our website other than these filings into this prospectus.

 

PLAN OF DISTRIBUTION

 

We may sell our securities, and any selling shareholder may sell shares of our common stock, in any one or more of the following ways from time to time: (i) through agents; (ii) to or through underwriters; (iii) through brokers or dealers; (iv) directly by us or any selling shareholders to purchasers, including through a specific bidding, auction or other process; or (v) through a combination of any of these methods of sale. The applicable prospectus supplement and/or other offering material will contain the terms of the transaction, name or names of any underwriters, dealers, agents and the respective amounts of securities underwritten or purchased by them, the initial public offering price of the securities, and the applicable agent’s commission, dealer’s purchase price or underwriter’s discount. Any selling shareholders, dealers and agents participating in the distribution of the securities may be deemed to be underwriters, and compensation received by them on resale of the securities may be deemed to be underwriting discounts. Additionally, because selling shareholders may be deemed to be “underwriters” within the meaning of Section 2(11) of the Securities Act, selling shareholders may be subject to the prospectus delivery requirements of the Securities Act.

 

Any initial offering price, dealer purchase price, discount or commission may be changed from time to time.

 

The securities may be distributed from time to time in one or more transactions, at negotiated prices, at a fixed price or fixed prices (that may be subject to change), at market prices prevailing at the time of sale, at various prices determined at the time of sale or at prices related to prevailing market prices.

 

Offers to purchase securities may be solicited directly by us or any selling shareholder or by agents designated by us from time to time. Any such agent may be deemed to be an underwriter, as that term is defined in the Securities Act, of the securities so offered and sold.

 

If underwriters are utilized in the sale of any securities in respect of which this prospectus is being delivered, such securities will be acquired by the underwriters for their own account and may be resold from time to time in one or more transactions, including negotiated transactions, at fixed public offering prices or at varying prices determined by the underwriters at the time of sale. Securities may be offered to the public either through underwriting syndicates represented by managing underwriters or directly by one or more underwriters. If any underwriter or underwriters are utilized in the sale of securities, unless otherwise indicated in the applicable prospectus supplement and/or other offering material, the obligations of the underwriters are subject to certain conditions precedent, and the underwriters will be obligated to purchase all such securities if they purchase any of them.

 

If a dealer is utilized in the sale of the securities in respect of which this prospectus is delivered, we will sell such securities, and any selling shareholder will sell shares of our common stock to the dealer, as principal. The dealer may then resell such securities to the public at varying prices to be determined by such dealer at the time of resale. Transactions through brokers or dealers may include block trades in which brokers or dealers will attempt to sell shares as agent but may position and resell as principal to facilitate the transaction or in crosses, in which the same broker or dealer acts as agent on both sides of the trade. Any such dealer may be deemed to be an underwriter, as such term is defined in the Securities Act, of the securities so offered and sold. In addition, any selling shareholder may sell shares of our common stock in ordinary brokerage transactions or in transactions in which a broker solicits purchases.

 

Offers to purchase securities may be solicited directly by us or any selling shareholder and the sale thereof may be made by us or any selling shareholder directly to institutional investors or others, who may be deemed to be underwriters within the meaning of the Securities Act with respect to any resale thereof.

 

Any selling shareholders may also resell all or a portion of their shares of our common stock in transactions exempt from the registration requirements of the Securities Act in reliance upon Rule 144 under the Securities Act provided they meet the criteria and conform to the requirements of that rule, Section 4(1) of the Securities Act or other applicable exemptions, regardless of whether the securities are covered by the registration statement of which this prospectus forms a part.

If so indicated in the applicable prospectus supplement and/or other offering material, we or any selling shareholder may authorize agents and underwriters to solicit offers by certain institutions to purchase securities from us or any selling shareholder at the public offering price set forth in the applicable prospectus supplement and/or other offering material pursuant to delayed delivery contracts providing for payment and delivery on the date or dates stated in the applicable prospectus supplement and/or other offering material. Such delayed delivery contracts will be subject only to those conditions set forth in the applicable prospectus supplement and/or other offering material.

 

Agents, underwriters and dealers may be entitled under relevant agreements with us or any selling shareholder to indemnification by us against certain liabilities, including liabilities under the Securities Act, or to contribution with respect to payments which such agents, underwriters and dealers may be required to make in respect thereof. The terms and conditions of any indemnification or contribution will be described in the applicable prospectus supplement and/or other offering material. We may pay all expenses incurred with respect to the registration of the shares of common stock owned by any selling shareholders, other than underwriting fees, discounts or commissions, which will be borne by the selling shareholders.

 

We or any selling shareholder may also sell shares of our common stock through various arrangements involving mandatorily or optionally exchangeable securities, and this prospectus may be delivered in connection with those sales.

 

We or any selling shareholder may enter into derivative, sale or forward sale transactions with third parties, or sell securities not covered by this prospectus to third parties in privately negotiated transactions. If the applicable prospectus supplement and/or other offering material indicates, in connection with those transactions, the third parties may sell securities covered by this prospectus and the applicable prospectus supplement and/or other offering material, including in short sale transactions and by issuing securities not covered by this prospectus but convertible into, exchangeable for or representing beneficial interests in securities covered by this prospectus, or the return of which is derived in whole or in part from the value of such securities. The third parties may use securities received under derivative, sale or forward sale transactions or securities pledged by us or any selling shareholder or borrowed from us, any selling shareholder or others to settle those sales or to close out any related open borrowings of stock, and may use securities received from us or any selling shareholder in settlement of those transactions to close out any related open borrowings of stock. The third party in such sale transactions will be an underwriter and will be identified in the applicable prospectus supplement (or a post-effective amendment) and/or other offering material.

 

Additionally, any selling shareholder may engage in hedging transactions with broker-dealers in connection with distributions of shares or otherwise. In those transactions, broker-dealers may engage in short sales of shares in the course of hedging the positions they assume with such selling shareholder. Any selling shareholder also may sell shares short and redeliver shares to close out such short positions. Any selling shareholder may also enter into option or other transactions with broker-dealers which require the delivery of shares to the broker-dealer. The broker-dealer may then resell or otherwise transfer such shares pursuant to this prospectus. Any selling shareholder also may loan or pledge shares, and the borrower or pledgee may sell or otherwise transfer the shares so loaned or pledged pursuant to this prospectus. Such borrower or pledgee also may transfer those shares to investors in our securities or the selling shareholder’s securities or in connection with the offering of other securities not covered by this prospectus.

 

Underwriters, broker-dealers or agents may receive compensation in the form of commissions, discounts or concessions from us or any selling shareholder. Underwriters, broker-dealers or agents may also receive compensation from the purchasers of shares for whom they act as agents or to whom they sell as principals, or both. Compensation as to a particular underwriter, broker-dealer or agent might be in excess of customary commissions and will be in amounts to be negotiated in connection with transactions involving shares. In effecting sales, broker-dealers engaged by us or any selling shareholder may arrange for other broker-dealers to participate in the resales.

 

Each series of securities will be a new issue and, other than the common stock, which is listed on the New York Stock Exchange, will have no established trading market. We may elect to list any series of securities on an exchange, and in the case of the common stock, on any additional exchange, but, unless

otherwise specified in the applicable prospectus supplement and/or other offering material, we shall not be obligated to do so. No assurance can be given as to the liquidity of the trading market for any of the securities.

 

Agents, underwriters and dealers may engage in transactions with, or perform services for, us or any selling shareholder and our respective subsidiaries in the ordinary course of business.

 

Any underwriter may engage in overallotment, stabilizing transactions, short covering transactions and penalty bids in accordance with Regulation M under the Securities Exchange Act of 1934. Overallotment involves sales in excess of the offering size, which create a short position. Stabilizing transactions permit bids to purchase the underlying security so long as the stabilizing bids do not exceed a specified maximum. Short covering transactions involve purchases of the securities in the open market after the distribution is completed to cover short positions. Penalty bids permit the underwriters to reclaim a selling concession from a dealer when the securities originally sold by the dealer are purchased in a covering transaction to cover short positions. Those activities may cause the price of the securities to be higher than it would otherwise be. If commenced, the underwriters may discontinue any of the activities at any time. An underwriter may carry out these transactions on the New York Stock Exchange, in the over-the-counter market or otherwise.

 

The place and time of delivery for securities will be set forth in the accompanying prospectus supplement and/or other offering material for such securities.

 

LEGAL MATTERS

 

The validity of the securities offered by this prospectus will be passed upon for us by Foley & Lardner LLP. The validity of the securities offered by this prospectus will be passed upon for any underwriters or agents by counsel named in the applicable prospectus supplement. The opinions of Foley & Lardner LLP and counsel for any underwriters or agents may be conditioned upon and may be subject to assumptions regarding future action required to be taken by us and any underwriters, dealers or agents in connection with the issuance of any securities. The opinions of Foley & Lardner LLP and counsel for any underwriters or agents may be subject to other conditions and assumptions, as indicated in the prospectus supplement.

 

EXPERTS

 

The financial statements and management’s assessment of the effectiveness of internal control over financial reporting (which is included in Management’s Report on Internal Control over Financial Reporting) incorporated in this prospectus by reference to The Manitowoc Company, Inc.’s Annual Report on Form 10-K for the year ended December 31, 2006 have been so incorporated in reliance on the report of PricewaterhouseCoopers LLP, an independent registered public accounting firm, given on the authority of said firm as experts in auditing and accounting.