UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(MARK ONE)

þ		ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

o		TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Lindsay Corporation

(Exact name of registrant as specified in its charter)

Delaware		47-0554096
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification No.)
2222 North 111th Street, Omaha, Nebraska		68164
(Address of principal executive offices)		(Zip Code)

402-829-6800

Securities registered pursuant to Section 12(b) of the Act:

Title of each class		Name of each exchange on which registered
Common Stock, $1.00 par value		New York Stock Exchange, Inc. (Symbol LNN)

Indicate by check mark if the registrant is a well-known seasoned issuer, (as defined in Rule 405 of the Securities Act). Yes o No þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes o No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer o		Accelerated filer þ		Non-accelerated filer o		Smaller reporting company o
				(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ

The aggregate market value of Common Stock of the registrant, all of which is voting, held by non-affiliates based on the closing sales price on the New York Stock Exchange, Inc. on February 26, 2010 was $453,013,823.

As of November 5, 2010, 12,526,451 shares of the registrant’s Common Stock were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Proxy Statement pertaining to the Registrant’s 2011 annual stockholders’ meeting are incorporated herein by reference into Part III.

 

 

TABLE OF CONTENTS

		Page(s)
Part I
Item 1. Business			2-9
Item 1A. Risk Factors			9-10
Item 1B. Unresolved Staff Comments			10
Item 2. Properties			10-11
Item 3. Legal Proceedings			11
Item 4. (Removed and Reserved)			12-13
Part II
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities			13
Item 6. Selected Financial Data			14
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations			14-22
Item 7A. Quantitative and Qualitative Disclosures about Market Risk			22
Item 8. Financial Statements and Supplementary Data			23-51
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure			52
Item 9A. Controls and Procedures			52-53
Item 9B. Other Information			54
Part III
Item 10. Directors, Executive Officers and Corporate Governance			55
Item 11. Executive Compensation			55
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters			55
Item 13. Certain Relationships and Related Transactions, and Director Independence			56
Item 14. Principal Accounting Fees and Services			56
Part IV
Item 15. Exhibits, Financial Statement Schedules			56
SIGNATURES			61
Exhibit 10.19
Exhibit 21
Exhibit 23
Exhibit 24
Exhibit 31.1
Exhibit 31.2
Exhibit 32

PART I

ITEM 1 — Business

INTRODUCTION

Lindsay Corporation (“Lindsay” or the “Company”) is a leading designer and manufacturer of self-propelled center pivot and lateral move irrigation systems which are used principally in the agricultural industry to increase or stabilize crop production while conserving water, energy, and labor. The Company has been in continuous operation since 1955, making it one of the pioneers in the automated irrigation industry. In 2008, the Company entered the market for water pumping stations and controls which provides further opportunities for integration with irrigation control systems. The Company also manufactures and markets various infrastructure products, including moveable barriers for traffic lane management, crash cushions, road marking and other road safety devices. In addition, the Company’s infrastructure segment produces large diameter steel tubing and railroad signals and structures, and provides outsourced manufacturing and production services for other companies. Industry segment information about Lindsay is included in Note R to the consolidated financial statements.

Lindsay, a Delaware corporation, maintains its corporate offices in Omaha, Nebraska, USA. The Company’s principal irrigation manufacturing facility is located in Lindsay, Nebraska, USA. The Company also has international sales and irrigation production facilities in France, Brazil, South Africa and China which provide it with important bases of operations in key international markets. Lindsay Europe SAS, located in La Chapelle, France, manufactures and markets irrigation equipment for the European market. Lindsay America do Sul Ltda., located in Mogi Mirim, Brazil, manufactures and markets irrigation equipment for the South American market. Lindsay Manufacturing Africa, (PTY) Ltd., located in Paarl, South Africa, manufactures and markets irrigation equipment for the sub-Saharan Africa market. Lindsay (Tianjin) Industry Co., Ltd., located in Tianjin, China, was organized in June 2009 and manufactures and markets irrigation equipment for the Chinese market.

Watertronics located in Hartland, Wisconsin, designs, manufactures, and services water pumping stations and controls for the agriculture, golf, landscape and municipal markets. Watertronics has been in business since 1986 and was acquired by the Company in January 2008.

Lindsay has three additional irrigation operating subsidiaries. Irrigation Specialists, Inc. (“Irrigation Specialists”) is a retail irrigation dealership based in Washington State that operates at three locations. Irrigation Specialists provides a strategic distribution channel in a key regional irrigation market. Lindsay Transportation, Inc. (“LTI”), located in Lindsay, Nebraska, primarily brokers delivery of irrigation equipment in the U.S. Digitec, Inc. (“Digitec”), located in Milford, Nebraska and Sioux Falls, South Dakota is an electronics research, development and manufacturing company. Digitec has been in business since 1987 and was acquired by the Company in August 2010.

Barrier Systems, Inc. (“BSI”), located in Rio Vista, California, manufactures moveable barrier products, specialty barriers and crash cushions. BSI has been in business since 1984 and was acquired by the Company in June 2006.

Snoline S.P.A. (“Snoline”), located in Milan, Italy, was acquired in December 2006, and is engaged in the design, manufacture and sale of road marking and safety equipment for use on roadways. See “Subsidiaries” below.

PRODUCTS BY SEGMENT

IRRIGATION SEGMENT

Products — The Company markets its center pivot and lateral move irrigation systems in the U.S. and internationally under its Zimmatic^® brand. The Company also manufactures and markets separate lines of center pivot and lateral move irrigation equipment for use on smaller fields under its Greenfield^® and Stettyn^™ brands, and hose reel travelers under the Perrot^™ brand (Greenfield^® in the United States, Perrot^™ in Europe, and Stettyn^™ in South Africa). The Company also produces or markets irrigation controls, chemical injection systems and remote monitoring and control systems which it sells under its GrowSmart^® brand. In addition to whole systems, the Company manufactures and markets repair and replacement parts for its irrigation systems and controls. The Company also designs, manufactures and services water pumping stations and controls for the agriculture, golf, landscape and municipal markets.

The Company’s irrigation systems are primarily of the standard sized center pivot type, with a small portion of its products consisting of the lateral move type. Both are automatic, continuous move systems consisting of sprinklers mounted on a water carrying pipeline which is supported approximately 11 feet off the ground by a truss system suspended between moving towers.

A typical center pivot for the U.S. market is approximately 1,300 feet long and is designed to circle within a quarter-section of land, which comprises 160 acres, wherein it irrigates approximately 130 to 135 acres. A typical center pivot for the international market is somewhat shorter than that in the U.S. market. A center pivot or lateral move system can also be custom designed and can irrigate from 25 to 600+ acres. A mini-pivot is a small version of the standard pivot and is used for smaller fields and/or shorter crops than standard pivots.

A center pivot system represents a significant investment to a farmer. In a dry land conversion to center pivot irrigation, approximately one-half of the investment is for the pivot itself and the remainder is attributable to installation of additional equipment such as wells, pumps, underground water pipes, electrical supply and a concrete pad upon which the pivot is anchored. Through Watertronics, the Company’s enhanced position in water pumping station controls presents further opportunities for integration with irrigation control systems.

The Company also manufactures and distributes mini-pivots and hose reel travelers. These systems are considered to be relatively easy to operate, and the hose reel travelers are easily moved from field to field. They are typically deployed in smaller or irregular fields. Mini-pivots and hose reel travelers require, on average, a lower investment than a typical standard center pivot.

The Company also markets pivot monitoring and control systems, which include remote telemetry and a web or personal computer hosted data acquisition and monitoring application. These systems allow growers to monitor their pivot system, accumulate data on the operation of the system, and control the pivot from a remote location by logging onto an internet web site. The pivot monitoring and control systems are marketed under the GrowSmart^® brand and product name FieldNET^®.

Other Types of Irrigation — Center pivot and lateral move irrigation systems compete with three other types of irrigation: flood, drip, and other mechanical devices such as hose reel travelers. The bulk of the worldwide irrigation is accomplished by the traditional method of flood irrigation. Flood irrigation is accomplished by either flooding an entire field, or by providing a water source (ditches or a pipe) along the side of a field, which is planed and slopes slightly away from the water source. The water is released to the crop rows through gates in the ditch or pipe, or through siphon tubes arching over the ditch wall into some of the crop rows. It runs down through the crop row until it reaches the far end of the row, at which time the water source is moved and another set of rows are flooded. A significant disadvantage or limitation of flood irrigation is that it cannot be used to irrigate uneven, hilly, or rolling terrain or fields. In “drip” or “low flow” irrigation, perforated plastic pipe or tape is installed on the ground or buried underground at the root level. Several other types of mechanical devices, such as hose reel travelers, irrigate the remaining irrigated acres.

Center pivot, lateral move, and hose reel traveler irrigation offers significant advantages when compared with other types of irrigation. It requires less labor and monitoring; can be used on sandy ground which, due to poor water retention ability, must have water applied frequently; can be used on uneven ground, thereby allowing previously unsuitable land to be brought into production; can also be used for the application of fertilizers, insecticides, herbicides, or other chemicals (termed “chemigation”); and conserves water and chemicals through precise control of the amount and timing of the application.

Markets — Water is an essential and critical requirement for crop production, and the extent, regularity, and frequency of water application can be a critical factor in crop quality and yield.

The fundamental factors which govern the demand for center pivot and lateral move systems are essentially the same in both the U.S. and international markets. Demand for center pivot and lateral move systems is determined by whether the value of the increased crop production attributable to center pivot or lateral move irrigation exceeds any increased costs associated with purchasing, installing, and operating the equipment. Thus, the decision to purchase a center pivot or lateral move system, in part, reflects the profitability of agricultural production, which is determined primarily by the prices of agricultural commodities and other farming inputs.

The current demand for center pivot systems has three sources: conversion to center pivot systems from less water efficient, more labor intensive types of irrigation; replacement of older center pivot systems, which are beyond their useful lives or are technologically obsolete; and conversion of dry land farming to irrigated farming. In addition, demand for center pivots and lateral move irrigation equipment depends upon the need for the particular operational characteristics and advantages of such systems in relation to alternative types of irrigation, primarily flood. More efficient use of the basic natural resources of land, water, and energy helps drive demand for center pivot and lateral move irrigation equipment. Increasing global population not only increases demand for agricultural output, but also places additional and competing demands on land, water, and energy. The Company expects demand for center pivots and lateral move systems to continue to increase relative to other irrigation methods because center pivot and lateral move systems are preferred where the soil is sandy, the terrain is not flat, the land area to be irrigated is sizeable, there is a shortage of reliable labor, water supply is restricted and conservation is critical, and/or chemigation will be utilized.

United States Market — In the United States, the Company sells its branded irrigation systems, including Zimmatic^®, to over 200 independent dealer locations, who resell to their customer, the farmer. Dealers assess their customer’s requirements, assemble and erect the system in the field, and provide additional system components, primarily relating to water supply (wells, pumps, pipes) and electrical supply (on-site generation or hook-up to power lines). Lindsay dealers generally are established local agri-businesses, many of which also deal in related products, such as well drilling and water pump equipment, farm implements, grain handling and storage systems, and farm structures.

International Market — Over the years, the Company has sold center pivot and lateral move irrigation systems throughout the world. The Company has production and sales operations in France, Brazil, South Africa and China as well as sales operations in Australia, New Zealand, Central America and the Middle East serving the key European, South American, African, Chinese, Australian/New Zealand, Central American and Middle Eastern markets, respectively. The Company also exports some of its equipment from the U.S. to other international markets. The majority of the Company’s U.S. export sales is denominated in U.S. dollars and is shipped against prepayments or U.S. bank confirmed irrevocable letters of credit or other secured means.

The Company’s international markets differ with respect to the need for irrigation, the ability to pay, demand, customer type, government support of agriculture, marketing and sales methods, equipment requirements, and the difficulty of on-site erection. The Company’s industry position is such that it believes that it will likely be considered as a potential supplier for most major international agricultural development projects utilizing center pivot or lateral move irrigation systems.

Competition — The U.S. center pivot irrigation system industry has seen significant consolidation of manufacturers over the years; four primary U.S. manufacturers remain today. The international market includes participation and competition by the leading U.S. manufacturers as well as certain regional manufacturers. The Company competes in certain product lines with several manufacturers, some of whom may have greater financial resources than the Company. The Company competes by continuously improving its products through ongoing research and development activities. The Company’s engineering and research expenses related to irrigation totaled approximately $4.1 million, $3.0 million, and $3.6 million for fiscal years 2010, 2009, and 2008, respectively. Competition also occurs in areas of price and seasonal programs, product quality, durability, controls, product characteristics, retention and reputation of local dealers, customer service, and, at certain times of the year, the availability of systems and their delivery time. The Company believes it competes favorably with respect to all of these factors.

INFRASTRUCTURE SEGMENT

Products — Quickchange^® Moveable Barrier^™— The Company’s Quickchange^® Moveable Barrier^™ (“QMB^®”) system is composed of three parts: 1) T-shaped concrete barriers that are connected to form a continuous wall, 2) a Barrier Transfer Machine^™ (“BTM^™”) capable of moving the barrier laterally across the pavement, and 3) the variable length barriers necessary for accommodating curves. A barrier element is approximately 32 inches high, 13-24 inches wide, 3 feet long and weighs 1,500 pounds. The barrier elements are interconnected by very heavy duty steel hinges to form a continuous barrier. The BTM^™ employs an inverted S-shaped conveyor mechanism that lifts the barrier, moving it laterally before setting it back on the roadway surface.

In permanent applications, the QMB^® systems increase capacity and reduce congestion by varying the number of traffic lanes to match the traffic demand. Roadways with fixed medians have a set number of lanes in each direction and cannot adjust to traffic demands that may change over the course of a day, or to capacity reductions caused by traffic incidents or road repair and maintenance. Applications include high volume highways where expansion may not be feasible due to lack of additional right-of-way, environmental concerns, or insufficient funding. The QMB^® system is particularly useful in busy commuter corridors and at choke points such as bridges and tunnels. QMB^® systems can also be deployed at roadway or roadside construction sites to accelerate construction, improve traffic flow and safeguard work crews and motorists by positively separating the work area and traffic. Examples of types of work completed with the help of a QMB^® system include highway reconstruction, paving and resurfacing, road widening, median and shoulder construction, and repairs to tunnels and bridges.

The Company offers a variety of equipment lease options for QMB^® systems and BTM^™ equipment used in construction applications. The leases extend for periods of three months or more for equipment already existing in inventory. Longer lease periods may be required for specialty equipment that must be built for specific projects.

These systems have been in use since 1987. Significant progress has been made introducing the products into international markets in recent years. Typical sales for a highway safety or road improvement project range from $2.0-$20.0 million, making them significant capital investments.

Crash Cushions and End Terminals — BSI and Snoline offer a complete line of redirective and non-redirective crash cushions which are used to enhance highway safety at locations such as toll booths, freeway off-ramps, medians and roadside barrier ends, bridge supports, utility poles and other fixed roadway hazards. The Company’s primary crash cushion products cover a full range of lengths, widths, speed capacities and application accessories and include the following brand names: TAU^®, Universal TAU-II^®, TAU-B_NR^™, ABSORB 350^® and Walt^™. In addition to these products the Company also offers guardrail end terminal products such as the X-Tension^™ and TESI^® systems. The crash cushions and end terminal products compete with other vendors in the world market. These systems are generally sold through a distribution channel that is domiciled in particular geographic areas.

Specialty Barriers — BSI and Snoline also offer specialty barrier products such as the SAB^™, ArmorGuard^™, PaveGuard^™ and DR46^™ portable barrier and/or barrier gate systems. These products offer portability and flexibility in setting up and modifying barriers in work areas and provide quick opening, high containment gates for use in median or roadside barriers. The gates are generally used to create openings in barrier walls of various types for both construction and incident management purposes. The DR46^™ is an energy absorbing barrier to shield motorcyclists from impacting guardrail posts which is becoming an area of focus for reducing a significant number of injuries.

Road Marking and Road Safety Equipment — Snoline also offers preformed tape and a line of road safety accessory products. The preformed tape is used primarily in temporary applications such as markings for work zones, street crossings, and road center lines or boundaries. The road safety equipment consists of mostly plastic and rubber products used for delineation, slowing traffic, and signaling. BSI also manages an ISO 17025 certified testing laboratory, Safe Technologies, Inc., that performs full-scale impact testing of highway safety products in accordance with the National Cooperative Highway Research Program (“NCHRP”) Report 350, the Manual for Assessing Safety Hardware (“MASH”), and the European Norms (EN1317) for these types of products. The NCHRP 350 and MASH guidelines are procedures required by the U.S. Department of Transportation Federal Highway Administration for the safety performance evaluation of highway features. The EN1317 Norms are being used to qualify roadway safety products for the European markets.

Other Products — The Company’s Diversified Manufacturing and Tubing business unit (“Diversified Manufacturing”) manufactures and markets large diameter steel tubing and railroad signals and structures, and provides outsourced manufacturing and production services for other companies. The Company continues to develop new relationships for infrastructure manufacturing in industries outside of agriculture and irrigation. The Company’s customer base includes certain large industrial companies and railroads. Each benefit from the Company’s design and engineering capabilities as well as the Company’s ability to provide a wide spectrum of manufacturing services, including welding, machining, painting, forming, galvanizing and assembling hydraulic, electrical, and mechanical components.

Markets — BSI’s and Snoline’s primary market includes moveable concrete barriers, delineation systems, guardrails and similar protective equipment. The U.S. roadway infrastructure market includes projects such as new roadway construction, bridges, tunnels, maintenance and resurfacing, and the purchase of right-of-ways for roadway expansion and development of technologies for relief of roadway congestion. Much of the U.S. highway infrastructure market is driven by government (state and federal) spending programs. For example, the U.S. government funds highway and road improvements through the Federal Highway Trust Fund Program. This program provides funding to improve the nation’s roadway system. Matching funding from the various states may be required as a condition of federal funding. In the long term, the Company believes that the federal program provides a solid platform for growth in the U.S. market, as it is generally acknowledged that additional funding will be required for infrastructure development and maintenance in the future.

The European market is presently very different from country to country, but the standardization in performance requirements and acceptance criteria for highway safety devices adopted by the European Committee for Standardization is expected to lead to greater uniformity and a larger installation program. This will also be influenced by the European Union’s prevention program which has the goal to lower highway traffic fatalities.

Competition — The Company competes in certain product lines with several manufacturers, some of whom may have greater financial resources than the Company. The Company competes by continuously improving its products through ongoing research and development activities. The Company’s engineering and research expenses related to infrastructure products totaled approximately $3.7 million, $3.0 million and $2.8 for fiscal years 2010, 2009 and 2008, respectively. The Company competes with certain products and companies in its crash cushion business, but has limited competition in its moveable barrier line, as there is not another moveable barrier product today comparable to the QMB^® system. However, the Company’s barrier product does compete with traditional “safety shaped” concrete barriers and other safety barriers.

Distribution methods and channels — The Company has production and sales operations in Nebraska, California and Italy. BSI’s and Snoline’s sales efforts consist of both direct sales and sales programs managed by its network of distributors and third-party representatives. The sales teams have responsibility for new business development and assisting distributors and dealers in soliciting large projects and new customers. The distributor and dealer networks have exclusive territories and are responsible for developing sales and providing service, including product maintenance, repair and installation. The typical dealer sells an array of safety supplies, road signs, crash cushions, delineation equipment and other highway products. Customers include Departments of Transportation, municipal transportation road agencies, roadway contractors, subcontractors, distributors and dealers. Due to the project nature of the roadway construction and congestion management markets, the Company’s customer base changes from year-to-year. Due to the limited life of projects, it is rare that a single customer will account for a significant amount of revenues in consecutive years. The customer base also varies depending on the type of product sold. The Company’s moveable barrier products are typically sold to transportation agencies or the contractors or suppliers serving those agencies. In contrast, distributors account for a majority of crash cushion sales since those products have lower price points and tend to have shorter lead times.

GENERAL

Certain information generally applicable to both of the Company’s reportable segments is set forth below.

The following table describes the Company’s total irrigation and infrastructure revenues for the past three years. United States export revenue is included in the region of destination.

		For the years ended August 31,
		2010								2009								2008
						% of Total								% of Total								% of Total
$ in millions		Revenues				Revenues				Revenues				Revenues				Revenues				Revenues
United States		$	204.5				57			$	200.6				60			$	309.2				65
Europe, Africa, Australia & Middle East			73.8				20				88.3				26				104.2				22
Mexico & Latin America			66.7				19				27.5				8				42.2				9
Other International			13.4				4				19.8				6				19.5				4
Total Revenues		$	358.4				100			$	336.2				100			$	475.1				100

SEASONALITY

Irrigation equipment sales are seasonal by nature. Farmers generally order systems to be delivered and installed before the growing season. Shipments to U. S. customers usually peak during the Company’s second and third fiscal quarters for the spring planting period. Sales of infrastructure products are traditionally higher during prime construction seasons and lower in the winter. The primary construction season in North America is from March until late September which corresponds to the Company’s third and fourth fiscal quarters.

CUSTOMERS

The Company is not dependent for a material part of either segment’s business upon a single customer or upon a limited number of customers. The loss of any one customer would not have a material adverse effect on the Company’s financial condition, results of operations or cash flow.

ORDER BACKLOG

As of August 31, 2010, the Company had an order backlog of $38.4 million compared with $43.6 million on August 31, 2009. Included in the August 31, 2010 backlog is a $14.8 million project for the Company’s QMB^® system, which is expected to ship in the first half of fiscal 2011. The August 31, 2009 backlog included $19.6 million for the Mexico City QMB^® system project completed in the first half of fiscal 2010. The Company expects that the existing backlog of orders will be filled in fiscal 2011.

Generally, the Company manufactures or purchases the components for its irrigation equipment from a sales forecast and prepares the equipment for shipment upon the receipt of a U.S. or international dealer’s firm order. Irrigation equipment orders from U.S. dealers are generally accompanied with a down payment unless they are purchased through one of the Company’s preferred vendor financing programs. Irrigation equipment orders being delivered to international markets from the U.S. are generally shipped against prepayments or receipt of an irrevocable letter of credit confirmed by a U.S. bank or other secured means, which call for delivery within time periods negotiated with the customer. Orders delivered from the Company’s international irrigation manufacturing operations are generally shipped according to payment and/or credit terms customary to that country or region.

Generally, the Company manufactures or purchases the components for its infrastructure equipment, excluding QMB^® systems, from a sales forecast and prepares the equipment for shipment upon the receipt of a U.S. or international distributor’s firm order. The Company manufactures or purchases the components for its QMB^® systems once a contract has been signed. Generally, QMB^® system contracts require a down payment before manufacturing of the QMB^® system will begin.

RAW MATERIALS AND COMPONENTS

Raw materials used by the Company include coil steel, angle steel, plate steel, zinc, tires, gearboxes, concrete, rebar, fasteners, and electrical and hydraulic components (motors, switches, cable, valves, hose and stators). The Company has, on occasion, faced shortages of certain such materials. The Company believes it currently has ready access to adequate supplies of raw materials and components.

CAPITAL EXPENDITURES

Capital expenditures for fiscal 2010, 2009, and 2008 were $5.8 million, $10.5 million and $14.1 million, respectively. Capital expenditures for fiscal 2011, excluding possible expansion of the leased barrier and barrier-transfer machine fleet, are estimated to be approximately $11.0 to $12.0 million. The planned expenditures include equipment for manufacturing equipment replacement, tooling, and facilities for identified efficiency improvements. The Company’s management does maintain flexibility to modify the amount and timing of some of the planned expenditures in response to economic conditions.

PATENTS, TRADEMARKS, AND LICENSES

Lindsay’s Zimmatic^®, Greenfield^®, GrowSmart^®, Quickchange^® Moveable Barrier^™, ABSORB 350^®, TAU^®, Universal TAU-II^®, TAU-B_NR^™, X-Tension^™, CableGuard^™, TESI^™, SAB^™, ArmourGuard^™, PaveGuard^™, DR46^™, U-MAD^™, and other trademarks are registered or applied for in the major markets in which the Company sells its products. Lindsay follows a policy of applying for patents on all significant patentable inventions in markets deemed appropriate. Although the Company believes it is important to follow a patent protection policy, Lindsay’s business is not dependent, to any material extent, on any single patent or group of patents.

EMPLOYEES

The number of persons employed by the Company and its wholly-owned subsidiaries at fiscal year ends 2010, 2009, and 2008 were 891, 766 and 1,239, respectively. None of the Company’s U.S. employees are represented by a union. Certain of the Company’s non-U.S. employees are unionized due to local governmental regulations.

ENVIRONMENTAL AND HEALTH AND SAFETY MATTERS

Like other manufacturing concerns, the Company is subject to numerous laws and regulations that govern environmental and occupational health and safety matters. The Company believes that its operations are substantially in compliance with all such applicable laws and regulations and that it holds all necessary permits in each jurisdiction in which its facilities are located. Environmental and health and safety regulations are subject to change and interpretation. In some cases, compliance with applicable regulations or standards may require the Company to make additional capital and operational expenditures. The Company, however, is not currently aware of any material capital expenditures required to comply with such regulations, other than as described below, and does not believe that these matters, individually or in the aggregate, are likely to have a material adverse effect on the Company’s consolidated financial condition, results of operations, or cash flows.

In 1992, the Company entered into a consent decree with the Environmental Protection Agency of the United States Government (the “EPA”) in which the Company committed to remediate environmental contamination of the groundwater that was discovered in 1982 through 1990 at and adjacent to its Lindsay, Nebraska facility (the “site”). The site was added to the EPA’s list of priority superfund sites in 1989. Between 1993 and 1995, remediation plans for the site were approved by the EPA and fully implemented by the Company. Since 1998, the primary remaining contamination at the site has been the presence of volatile organic chemicals in the groundwater. The current remediation process consists of drilling wells into the aquifer and pumping water to the surface to allow these contaminants to be removed by aeration. In 2008, the Company and the EPA conducted a periodic five-year review of the status of the remediation of the contamination of the site. In response to the review, the Company and its environmental consultants have developed a remedial action work plan that will allow the Company and the EPA to better identify the boundaries of the contaminated groundwater and determine whether the contaminated groundwater is being contained by current and planned remediation methods. The Company accrues the anticipated cost of remediation when the obligation is probable and can be reasonably estimated. During the second quarter of fiscal 2010, the Company accrued incremental costs of $0.7 million for additional environmental monitoring and remediation in connection with the current ongoing remedial action work plan. Amounts accrued and included in balance sheet liabilities related to the remediation actions were $0.9 million and $1.3 million at August 31, 2010 and 2009, respectively. Although the Company has accrued all reasonably estimable costs of completing the actions defined in the current ongoing work plan agreed to between the Company and the EPA, it is possible that additional testing may be required or additional actions could be requested or mandated by the EPA at any time, resulting in the recognition of additional related expenses.

SUBSIDIARIES

The Company’s primary wholly-owned operating subsidiaries include the following: Lindsay Manufacturing, LLC, Lindsay Transportation, Inc., Watertronics, LLC, Digitec, Inc., Lindsay Europe SAS, Irrigation Specialists, Inc., Lindsay America do Sul Ltda., Lindsay Manufacturing Africa (PTY) Ltd., Lindsay (Tianjin) Industry Co., Ltd., Barrier Systems, Inc., Snoline S.P.A. and Lindsay Structures, LLC

Lindsay Manufacturing, LLC and its predecessor, Lindsay Manufacturing Co., have manufactured and marketed irrigation equipment for the North American market and international export market since 1955. Lindsay Manufacturing, LLC also manufactures certain products for the infrastructure segment including the Company’s outsource manufacturing operation. Lindsay Manufacturing, LLC operates its primary manufacturing facility in Lindsay, Nebraska and a separate facility in Omaha, Nebraska.

Lindsay Transportation, Inc. was formed in 1975. It operates as a transportation broker procuring equipment for delivery of primarily irrigation equipment in the United States and Canada for the Company’s products and the bulk of its inbound raw materials.

Watertronics, LLC, located in Hartland, Wisconsin, designs, manufactures, and services water pumping stations and controls for the agriculture, golf, landscape and municipal markets. Watertronics has been in business since 1986 and was acquired by the Company in January 2008.

Digitec, Inc., was formed in 1987 and is an electronics research, development and manufacturing company supplying a majority of its products to the irrigation markets and was acquired by the Company in August 2010.

Lindsay Europe SAS, located in La Chapelle, France, was acquired in March 2001, and is a manufacturer and marketer of irrigation equipment for the European market.

Irrigation Specialists, Inc., a retail irrigation dealership in Washington State, was acquired in March 2002.

Lindsay America do Sul Ltda., located in Mogi Mirim, Brazil, was acquired in April 2002 and is a manufacturer and marketer of irrigation equipment for the South American market.

Lindsay Manufacturing Africa (PTY) Ltd., located in Paarl, South Africa, was organized in September 2002 and is a manufacturer and marketer of irrigation equipment for the sub-Saharan Africa market.

Lindsay (Tianjin) Industry Co., Ltd., located in Tianjin, China, was organized in June 2009 and manufactures and markets irrigation equipment for the Chinese market.

Barrier Systems, Inc. is located in Rio Vista, California and manufactures its moveable barrier products along with other specialty barriers and crash cushions. BSI has been in business since 1984 and was acquired by Lindsay in June 2006.

Snoline, S.P.A. is located in Milan, Italy and manufactures and markets road safety and road marking equipment for use on roadways. Snoline has been in business since 1955 and was acquired by Lindsay in December 2006.

Lindsay Structures, LLC was formed in 2009 to acquire certain assets of GE Transportation Systems Global Signaling, LLC and is a manufacturer of railroad signals and structures.

FINANCIAL INFORMATION ABOUT FOREIGN AND U.S. OPERATIONS

The Company’s primary production facilities are located in the United States, but it also has smaller production facilities in France, Brazil, South Africa, China and Italy. Most of the Company’s financial transactions are in U.S. dollars, although some export sales and sales from the Company’s foreign subsidiaries, which are approximately 20% of total consolidated Company sales in fiscal 2010, are conducted in local currencies.

A portion of the Company’s cash flow is derived from sales and purchases denominated in currencies other than the designated functional currency. To reduce the uncertainty of foreign currency exchange rate movements on these sales and purchase commitments, the Company monitors its risk of foreign currency fluctuations and, at times, may enter into forward exchange or option contracts for transactions denominated in a currency other than the functional currency for certain of the Company’s operations.

In addition to the transactional foreign currency exposures mentioned above, the Company also has translation exposure resulting from translating the financial statements of its international subsidiaries into U.S. dollars. In order to reduce this translation exposure, the Company, at times, utilizes foreign currency forward contracts to hedge its net investment exposure in its foreign operations. For information on the Company’s foreign currency risks, see Item 7A of Part II of this report.

INFORMATION AVAILABLE ON THE LINDSAY WEBSITE

The Company makes available free of charge on its website homepage, under the tab “Investors — SEC Filings”, its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, Proxy Statements, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after the Company electronically files such material with, or furnishes it to, the SEC. The Company’s internet address is http://www.lindsay.com; however, information posted on its website is not part of this report on Form 10-K. The following documents are also posted on the Company’s website homepage, under the tab “Investors — Governance”:

Audit Committee Charter
Compensation Committee Charter
Corporate Governance and Nominating Committee Charter
Corporate Governance Principles
Code of Ethical Conduct
Code of Business Conduct and Ethics
Employee Complaint Procedures for Accounting and Auditing Matters
Special Toll-Free Hotline Number, E-mail Address, and Mail Address for Making Confidential or Anonymous Complaints

These documents are also available in print to any shareholder upon request, by sending a letter addressed to the Secretary of the Company.

New York Stock Exchange Certification

On April 5, 2010, the Company’s Chief Executive Officer certified to the New York Stock Exchange that he was not aware of any violation by the Company of the New York Stock Exchange corporate governance listing standards as of that date. This certification made by the CEO is an annual certification required by the New York Stock Exchange.

ITEM 1A — Risk Factors

The following are certain of the more significant risks that may affect the Company’s business, financial condition and results of operations.

The Company’s U.S. and international irrigation equipment sales are highly dependent on the agricultural industry. The Company’s U.S. and international irrigation equipment sales are highly dependent upon the need for irrigated agricultural crop production which, in turn, depends upon many factors, including total worldwide crop production, the profitability of agricultural crop production, agricultural commodity prices, net cash farm income, availability of financing for farmers, governmental policies regarding the agricultural sector, water and energy conservation policies, the regularity of rainfall, regional climate change, and foreign currency exchange rates. As farm income decreases, farmers may postpone capital expenditures or seek less expensive irrigation equipment.

The Company’s infrastructure revenues are highly dependent on government funding of transportation projects. The demand for the Company’s infrastructure products depends to a large degree on the amount of government spending authorized to improve road and highway systems. For example, the U.S. government funds highway and road improvements through the Federal Highway Trust Fund Program and matching funding from states may be required as a condition of federal funding. If highway funding is reduced or delayed, it may reduce demand for the Company’s infrastructure products.

The Company’s profitability may be negatively affected by increases in the cost of raw materials, as well as in the cost of energy. Certain of the Company’s input costs, such as the cost of steel, zinc, and other raw materials, may increase rapidly from time to time. Because there is a level of price competition in the market for irrigation equipment and certain infrastructure products, the Company may not be able to recoup increases in these costs through price increases for its products, which would result in reduced profitability. Whether increased operating costs can be passed through to the customer depends on a number of factors, including farm income and the price of competing products. The cost of raw materials can be volatile and is dependent on a number of factors, including availability, demand, and freight costs.

The Company’s international equipment sales are highly dependent on foreign market conditions and are subject to additional risk and restrictions. For the fiscal year ended August 31, 2010, approximately 43% of the Company’s consolidated revenues were generated from international sales. Specifically, international revenues are primarily generated from Australia, Canada, Central and Western Europe, Mexico, the Middle East, South Africa, China, and Central and South America. In addition to risks relating to general economic and political stability in these countries, the Company’s international sales are affected by international trade barriers, including governmental policies on tariffs, taxes, import or export licensing requirements, trade sanctions, and foreign currency exchange rates. International sales are also more susceptible to disruption from political instability and similar incidents.

Compliance with applicable environmental and health and safety regulations or standards may require additional capital and operational expenditures. Like other manufacturing concerns, the Company is subject to numerous laws and regulations which govern environmental and occupational health and safety matters. The Company believes that its operations are substantially in compliance with all such applicable laws and regulations and that it holds all necessary permits in each jurisdiction in which its facilities are located. Environmental and health and safety regulations are subject to change and interpretation. Compliance with applicable regulations or standards may require the Company to make additional capital and operational expenditures. The Company’s ongoing remediation activities at its Lindsay, Nebraska facility are described in Note O to the Company’s consolidated financial statements.

The Company’s sales and access to credit may be negatively affected by current economic conditions. The ongoing instability in U.S. and international financial and credit markets along with the resulting global recessionary concerns and the slow economic recovery has adversely affected, and is expected to continue to adversely affect, the ability of farmers and government agencies to buy and finance irrigation equipment and highway infrastructure equipment. It is not certain how long these factors may affect demand for the Company’s products. Disruptions in the financial and credit markets could also restrict the Company’s ability to access credit financing under its existing credit facilities or to obtain additional financing.

ITEM 1B — Unresolved Staff Comments

None.

ITEM 2 — Properties

The Company’s principal U.S. manufacturing plant is a 300,000 square foot facility consisting of eight separate buildings located on 43 acres in Lindsay, Nebraska where it manufactures irrigation and infrastructure products for North American markets as well as certain export markets. The Company owns this facility as well as an additional 79 acres of undeveloped land adjacent to its primary property which it uses for research, development and testing purposes.

The Company owns an 83,000 square foot facility located on approximately six acres in Omaha, Nebraska that primarily serves as a manufacturing location for infrastructure products. The Company also leases approximately 29,500 square feet of office space in Omaha, Nebraska where it maintains its executive offices as well as its U.S. and international sales and marketing offices and engineering laboratory space. The lease expires in February 2019.

Lindsay Europe SAS owns a manufacturing plant located in La Chapelle, France where it manufactures irrigation products for European markets. This facility consists of three separate buildings containing approximately 72,000 square feet of usable space situated on approximately 3.5 acres.

Lindsay America do Sul, Ltda. leases a manufacturing plant located in Mogi Mirim, Sao Paulo, Brazil where it manufactures irrigation products for South American markets. This facility consists of two buildings containing approximately 67,000 square feet of usable space. The lease on this facility expires in December 2013.

Lindsay Manufacturing Africa (PTY) Ltd. currently leases a manufacturing facility in Paarl, South Africa where it manufactures irrigation products for the sub-Saharan Africa markets. The facility contains a total of 61,000 square feet of usable space. The lease on the facility expires in September 2011 and may be canceled by Lindsay Manufacturing Africa (PTY) Ltd. prior to that time upon six months notice.

Irrigation Specialists, Inc. conducts its retail operations in leased buildings located in Pasco, Grandview and Othello, Washington. The buildings range in size from 4,000 square feet to 22,225 square feet. The leases on these retail stores expire in August 2012 for Pasco and Othello, and August 2014 for Grandview.

Watertronics, LLC owns two commercial buildings totaling approximately 73,000 square feet on five acres located in Hartland, Wisconsin where it maintains its executive, engineering and manufacturing offices. It also owns a 4,000 square foot commercial building located in Melbourne, Florida where it maintains a sales and service office.

Digitec, Inc. leases two buildings located in Milford, Nebraska, which serve as manufacturing and engineering locations. The buildings range in size from approximately 4,400 square feet to approximately 10,000 square feet for the engineering and manufacturing buildings, respectively. The leases for these two buildings expire in August 2015 with a five year renewal option. Digitec also leases approximately 1,400 square feet of office space in Sioux Falls, South Dakota. This lease expires in January 2011 and has a month to month option after that.

Lindsay (Tianjin) Industry Co., Ltd. currently leases a manufacturing facility in Tianjin, China where it manufactures irrigation products for the Chinese markets. The facility contains a total of 57,000 square feet of leased space and the lease expires in May 2013. In addition, the Company also leases office space in Beijing, China. The Beijing lease expires in July 2011 with a two year renewal option. The lease may be canceled by Lindsay (Tianjin) Industry Co., Ltd. prior to the expiration upon a three-month notice.

BSI owns a 30,000 square foot commercial building located on seven acres in Rio Vista, California where it manufactures its infrastructure products. BSI leases additional warehouse space in Rio Vista, California. The lease on this facility expires in April 2018 and may be terminated by BSI prior to that time upon a sixty day notice and payment of a nominal termination fee. BSI also leases additional office space in Vacaville, California where it maintains its executive offices. The lease on this facility expires in July 2013.

Snoline owns a 45,000 square foot commercial building located in Milan, Italy where it maintains its executive offices and manufactures its infrastructure products.

The Company believes that each of its current facilities is adequate to support normal and planned operations and intends to renew or commence additional leasing or purchase arrangements as existing arrangements expire.

ITEM 3 — Legal Proceedings

In the ordinary course of its business operations, the Company is involved, from time to time, in commercial litigation, employment disputes, administrative proceedings, and other legal proceedings. No such current proceedings, individually or in the aggregate, are expected to have a material effect on the business or financial condition of the Company.

ITEM 4 — (Removed and Reserved)

EXECUTIVE OFFICERS AND SIGNIFICANT EMPLOYEES OF THE REGISTRANT

The executive officers and significant employees of the Company, their ages, positions and past five years experience are set forth below. All executive officers of the Company are appointed by the Board of Directors annually and have employment agreements. There are no family relationships between any director or executive officer. There are no arrangements or understandings between any executive officer and any other person pursuant to which they were selected as an officer.

		Age				Position
Richard W. Parod			57			President and Chief Executive Officer
Eric R. Arneson*			36			Vice President, General Counsel and Secretary
Steven S. Cotariu			52			President — Infrastructure Business
David B. Downing			55			CFO and President — International Operations
Dan G. Keller*			51			Vice President — Human Resources
Tim J. Paymal			36			Vice President and Chief Accounting Officer
Mark A. Roth*			35			Vice President — Corporate Development and Treasurer
Barry A. Ruffalo			40			President — Irrigation
Douglas A. Taylor*			47			Vice President and Chief Information Officer
Lori L. Zarkowski*			35			Corporate Controller

Mr. Richard W. Parod is President and Chief Executive Officer (“CEO”) of the Company, and has held such positions since April 2000. Prior to that time and since 1997, Mr. Parod was Vice President and General Manager of the Irrigation Division of The Toro Company. Mr. Parod was employed by James Hardie Irrigation from 1993 through 1997, becoming President in 1994. Mr. Parod has been a Director since April 2000, when he began his employment with the Company.

Mr. Eric R. Arneson is Vice President, General Counsel and Secretary of the Company and has held such positions since April 2008. Prior to joining Lindsay and since January 1999, Mr. Arneson practiced law with the law firm of Kutak Rock LLP, and was most recently a partner of the firm.

Mr. Steven S. Cotariu is President — Infrastructure Business of the Company and has held that position since September 2010 when he joined the Company. Prior to joining Lindsay and since October 2002, Mr. Cotariu held a variety of positions of increasing responsibility with Pentair, Inc., most recently as Vice President, Marketing for Pentair Technical Products. Previously, Mr. Cotariu held marketing and business development positions with Textron, Inc. and was a consultant with McKinsey & Company.

Mr. David B. Downing is Chief Financial Officer and President — International Operations of the Company and has held such positions since March 2009 and March 2008, respectively. Between March 2008 and March 2009, Mr. Downing was president — International Operations. Previously he was Senior Vice President-Finance, Chief Financial Officer, Treasurer and Secretary of the Company and held such position since August 2004, when he joined the Company. Prior to August 2004, Mr. Downing served as the President of FPM L.L.C., a heat-treating company based in Elk Grove Village, IL, after joining that company in January 2001 as Vice President and Chief Financial Officer. Previously, Mr. Downing served as Vice President and Controller for Thermo-King, which manufactured transport refrigeration equipment.

Mr. Dan G. Keller is Vice President — Human Resources of the Company and has held such position since April 2008, when he joined the Company. Prior to that time and since December 2006, Mr. Keller was a Director of Human Resources for Johnson & Johnson. Previously, Mr. Keller was with Pfizer Inc., the last seven years as a Director of Human Resources.

Mr. Tim J. Paymal is Vice President and Chief Accounting Officer of the Company. Mr. Paymal joined Lindsay in January 2005 as Corporate Controller and was promoted to Vice President and Chief Accounting Officer in April 2008. Prior to that time and since 1996, Mr. Paymal was most recently an Audit Senior Manager with Deloitte & Touche LLP.

Mr. Mark A. Roth is Vice President — Corporate Development and Treasurer of the Company. Mr. Roth joined Lindsay in 2004, as Director of Corporate Development and was promoted to Vice President of Corporate Development in March 2007, adding Treasurer to his role in April 2008. From March 2001 through 2004 when he joined the Company, Mr. Roth was an Associate with McCarthy Group, Inc., a Midwest-based investment bank and private equity fund. From January 1998 through February 2001, Mr. Roth was a Senior Credit Analyst at US Bancorp.

Mr. Barry A. Ruffalo is President — Irrigation of the Company and has held such position since March 2007, when he joined the Company. Prior to joining Lindsay and since February 2007, Mr. Ruffalo was most recently a Director of North American Operations for Joy Global Inc. Prior to that time and since 1996, Mr. Ruffalo held various positions of increasing responsibility with Case New Holland; the last five years were spent in Operations Management within the Tractor and the Hay and Forage divisions for both the Case IH and New Holland brands.

Mr. Douglas A. Taylor is Vice President and Chief Information Officer of the Company. He joined the Company in May 2005 as the Chief Information Officer and was promoted to Vice President and Chief Information Officer in October 2006. From 2004 through early 2005, Mr. Taylor was a Technology Consultant. Prior to that time and since 1999, Mr. Taylor held several positions with ConAgra Foods, most recently as the Vice President of Process and Systems Integration, Vice President of Financial Systems, and Director of Information Systems.

Ms. Lori L. Zarkowski is Corporate Controller of the Company, and has held such position since April 2008. Ms. Zarkowski joined Lindsay in June 2007 as Corporate Reporting Manager and was promoted to Corporate Controller in April 2008. Prior to joining the Company and since 1997, Ms. Zarkowski was most recently an Audit Senior Manager with Deloitte & Touche LLP.

PART II

ITEM 5 — Market For the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Lindsay Common Stock trades on the New York Stock Exchange, Inc. (NYSE) under the ticker symbol “LNN”. As of September 30, 2010, there were approximately 187 shareholders of record.

The following table sets forth for the periods indicated the range of the high and low stock prices and dividends paid per share:

		Fiscal 2010 Stock Price												Fiscal 2009 Stock Price
		High				Low				Dividends				High				Low				Dividends
First Quarter		$	45.08			$	31.20			$	0.080			$	97.80			$	33.02			$	0.075
Second Quarter			47.45				35.02				0.080				43.22				24.00				0.075
Third Quarter			43.92				33.00				0.080				41.52				20.89				0.075
Fourth Quarter			38.19				30.80				0.085				47.02				29.71				0.080
Year		$	47.45			$	30.80			$	0.325			$	97.80			$	20.89			$	0.305

Purchases of equity securities by the issuer and affiliated purchases — The Company made no repurchases of its common stock under the Company’s stock repurchase plan during the fiscal year ended August 31, 2010; therefore, tabular disclosure is not presented. From time to time, the Company’s Board of Directors has authorized management to repurchase shares of the Company’s common stock. Under this share repurchase plan, management has existing authorization to purchase, without further announcement, up to 881,139 shares of the Company’s common stock in the open market or otherwise.

ITEM 6 — Selected Financial Data

		For the Years Ended August 31,
in millions, except per share amounts		2010				2009				2008				2007				2006
Operating revenues (1)		$	358.4			$	336.2			$	475.1			$	281.9			$	226.0
Gross profit			98.9				80.6				123.8				69.7				48.2
Operating expenses			61.1				58.2				61.6				46.0				32.7
Operating income			37.8				22.4				62.2				23.8				15.5
Net earnings			24.9				13.8				39.4				15.6				11.7
Net diluted earnings per share			1.98				1.11				3.20				1.31				1.00
Cash dividends per share			0.325				0.305				0.285				0.265				0.245
Property, plant and equipment, net			57.6				59.6				57.6				44.3				27.0
Total assets			325.5				307.9				325.9				242.2				192.2
Long-term obligations			8.6				19.5				25.6				31.8				25.7
Return on sales			6.9	%			4.1	%			8.3	%			5.5	%			5.2	%
Return on beginning assets (2)			8.1	%			4.2	%			16.3	%			8.1	%			8.7	%
Diluted weighted average shares			12.585				12.461				12.324				11.964				11.712

ITEM 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations

Concerning Forward-Looking Statements — This Annual Report on Form 10-K contains not only historical information, but also forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Statements that are not historical are forward-looking and reflect expectations for future Company performance. In addition, forward-looking statements may be made orally or in press releases, conferences, reports, on the Company’s worldwide web site, or otherwise, in the future by or on behalf of the Company. When used by or on behalf of the Company, the words “expect”, “anticipate”, “estimate”, “believe”, “intend”, and similar expressions generally identify forward-looking statements. The entire section entitled Market Conditions and Fiscal 2011 Outlook should be considered forward-looking statements. For these statements, the Company claims the protection of the safe harbor for forward-looking statements contained in the Private Securities Litigation Reform Act of 1995.

Forward-looking statements involve a number of risks and uncertainties, including but not limited to those discussed in the “Risk Factors” section contained in Item 1A. Readers should not place undue reliance on any forward-looking statement and should recognize that the statements are predictions of future results which may not occur as anticipated. Actual results could differ materially from those anticipated in the forward-looking statements and from historical results, due to the risks and uncertainties described herein, as well as others not now anticipated. The risks and uncertainties described herein are not exclusive and further information concerning the Company and its businesses, including factors that potentially could materially affect the Company’s financial results, may emerge from time to time. Except as required by law, the Company assumes no obligation to update forward-looking statements to reflect actual results or changes in factors or assumptions affecting such forward-looking statements.

Overview

The Company manufactures and markets Zimmatic^®, Greenfield^®, Stettyn^™, and Perrot^™ center pivot, lateral move, and hose reel irrigation systems. The Company also produces irrigation controls, chemical injection systems and remote monitoring and control systems which it sells under its GrowSmart^® brand. These products are used by farmers to increase or stabilize crop production while conserving water, energy, and labor. Through its acquisitions, the Company has been able to enhance its capabilities in providing innovative, turn-key solutions to customers through the integration of its proprietary pump stations, controls and designs. The Company sells its irrigation products primarily to a world-wide independent dealer network, who resell to their customer, the farmer. The Company’s principal irrigation manufacturing facilities are located in Lindsay, Nebraska, USA. The Company also has irrigation production facilities in France, South Africa, Brazil, China and Hartland, Wisconsin, USA. The Company also manufactures and markets various infrastructure products, including moveable barriers for traffic lane management, crash cushions, preformed reflective pavement tapes and other road safety devices, through its wholly-owned subsidiaries BSI (located in Rio Vista, California) and Snoline (located in Milan, Italy). In addition, the Company’s infrastructure segment produces large diameter steel tubing and railroad signals and structures, and provides outsourced manufacturing and production services for other companies.

Key factors which impact demand for the Company’s irrigation products include agricultural commodity prices, net cash farm income, crop yields, weather, environmental regulations, availability of financing and interest rates. A key factor which impacts demand for the Company’s infrastructure products is the amount of spending authorized by governments to improve road and highway systems. Much of the U.S. highway infrastructure market is driven by government spending programs. For example, the U.S. government funds highway and road improvements through the Federal Highway Trust Fund Program. This program provides funding to improve the nation’s roadway system. Matching funding from the various states may be required as a condition of federal funding.

The Company will continue to focus on opportunities for growth both organically and through acquisitions. On August 31, 2010, the Company completed the acquisition of Digitec, Inc., and on January 24, 2008, the Company completed the acquisition of Watertronics. These acquisitions reflect the execution of the Company’s strategy to grow its irrigation business with additional proprietary irrigation products. In addition, on August 28, 2009, the Company completed the acquisition of certain assets of GE Transportation Systems Global Signaling, LLC. The Company sees opportunities to create shareholder value through the acquisition of product line extensions that will enhance the Company’s highway safety product offering, globally.

Since 2001, the Company has added the operations in Europe, South America, South Africa and China. The addition of those operations has allowed the Company to strengthen its market position in those regions, yet they remain relatively small in scale. As a result, none of the international operations has achieved the operating margin of the United States based irrigation operations.

Recently Issued Accounting Pronouncements

In October 2009, the FASB issued ASU No. 2009-13 (“ASU 2009-13”), which addresses the accounting for multiple-deliverable arrangements to enable vendors to account for products or services (deliverables) separately rather than as a combined unit. ASU 2009-13 is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. The Company is assessing the impact that the adoption of this standard will have on its consolidated financial statements, but expects the impact to be minimal.

Critical Accounting Policies and Estimates

In preparing the consolidated financial statements in conformity with U.S. generally accepted accounting principles (“GAAP”), management must make a variety of decisions which impact the reported amounts and the related disclosures. Such decisions include the selection of the appropriate accounting principles to be applied and the assumptions on which to base accounting estimates. In reaching such decisions, management applies judgment based on its understanding and analysis of the relevant facts and circumstances. Certain of the Company’s accounting policies are critical, as these policies are most important to the presentation of the Company’s consolidated results of operations and financial condition. They require the greatest use of judgments and estimates by management based on the Company’s historical experience and management’s knowledge and understanding of current facts and circumstances. Management periodically re-evaluates and adjusts the estimates that are used as circumstances change. There were no significant changes to the Company’s critical accounting policies during fiscal 2010.

Following are the accounting policies management considers critical to the Company’s consolidated results of operations and financial condition:

Inventories — Inventories are stated at the lower of cost or market. Cost is determined by the last-in, first-out (LIFO) method for the Company’s Lindsay, Nebraska inventory and two warehouses in Idaho and Texas. Cost is determined by the first-in, first-out (FIFO) method for inventory at the Company’s Omaha, Nebraska warehouse, BSI, Watertronics, China and non-U.S. warehouse locations. Cost is determined by the weighted average cost method for inventory at the Company’s other operating locations in Washington State, France, Brazil, Italy and South Africa. At all locations, the Company reserves for obsolete, slow moving, and excess inventory by estimating the net realizable value based on the potential future use of such inventory.

Note A to the consolidated financial statements provides a summary of the significant accounting policies followed in the preparation of the consolidated financial statements. Other footnotes describe various elements of the financial statements and the assumptions on which specific amounts were determined. While actual results could differ from those estimated at the time of the preparation of the consolidated financial statements, management is committed to preparing financial statements which incorporate accounting policies, assumptions, and estimates that promote the representational faithfulness, verifiability, neutrality, and transparency of the accounting information included in the consolidated financial statements.

Results of Operations

The following “Fiscal 2010 Compared to Fiscal 2009” and the “Fiscal 2009 Compared to Fiscal 2008” sections present an analysis of the Company’s consolidated operating results displayed in the Consolidated Statements of Operations and should be read together with the industry segment information in Note R to the consolidated financial statements.

Fiscal 2010 Compared to Fiscal 2009

The following table provides highlights for fiscal 2010 compared with fiscal 2009:

		For the Years Ended								Percent
		August 31,								Increase
$ in thousands		2010				2009				(Decrease)
Consolidated
Operating revenues		$	358,440			$	336,228				6.6	%
Cost of operating revenues		$	259,540			$	255,597				1.5	%
Gross profit		$	98,900			$	80,631				22.7	%
Gross margin			27.6	%			24.0	%
Operating expenses (1)		$	61,058			$	58,214				4.9	%
Operating income		$	37,842			$	22,417				68.8	%
Operating margin			10.6	%			6.7	%
Interest expense		$	(1,557	)		$	(2,030	)			(23.3	)%
Interest income		$	352			$	934				(62.3	)%
Other income (expense), net		$	145			$	(782	)			118.5	%
Income tax provision		$	11,920			$	6,716				77.5	%
Effective income tax rate			32.4	%			32.7	%
Net earnings		$	24,862			$	13,823				79.9	%
Irrigation Equipment Segment (See Note R)
Operating revenues		$	258,666			$	255,507				1.2	%
Operating income (2)		$	40,869			$	35,504				15.1	%
Operating margin (2)			15.8	%			13.9	%
Infrastructure Products Segment
Operating revenues		$	99,774			$	80,721				23.6	%
Operating income (2)		$	11,083			$	(36	)			N/A
Operating margin (2)			11.1	%			0.0	%

Revenues

Operating revenues for fiscal 2010 increased by $22.2 million or 7% from fiscal 2009. The increase was attributable to a 24% increase in infrastructure product revenues and a 1% increase in irrigation equipment revenues.

U.S. irrigation revenues decreased $3.3 million or 2% compared to fiscal 2009. This decrease in revenues was primarily due to a decrease of $20.9 million in U.S. irrigation revenues in the first quarter of fiscal 2010 as compared to the same prior year period due to record backlog from the end of fiscal 2008. Offsetting this decrease was an increase in the number of irrigation systems sold in the remaining fiscal quarters of fiscal 2010 compared to the same prior year periods. This was tempered by a decrease in the average selling price per unit. Commodity prices rose during the fourth quarter of fiscal 2010 with corn up approximately 70%, soybeans up approximately 26% and wheat up over 60% since early June 2010. The August update to the USDA projections for 2010 Net Farm Income indicates a 24% increase compared to 2009 and projects it to be the fourth highest on record, creating generally positive economic conditions for U.S. farmers. International irrigation revenues increased $6.4 million or 6% compared to fiscal 2009. The Company’s international irrigation business units in South America, South Africa and Europe, as well as exports to Mexico, all achieved solid growth in fiscal 2010, partially offset by lower revenues in other regions.

Infrastructure products segment revenues of $99.8 million increased by $19.1 million or 24% compared to the prior fiscal year. The increase in infrastructure revenues is attributable to revenues increasing primarily from sales of quick-change moveable barrier systems. The Company continues to see strong interest in its moveable barrier products which are a very cost effective way to add lane capacity. This increase was partially offset by smaller decreases at the Company’s Snoline and Diversified Manufacturing business units.

Gross Margin

Gross profit was $98.9 million for fiscal 2010, an increase of $18.3 million compared to fiscal 2009. Gross margin was 27.6% for fiscal 2010 compared to 24.0% for the prior fiscal year. Gross margin on irrigation products was favorably impacted by improved factory efficiencies at the Company’s Lindsay, Nebraska facility and a favorable regional sales mix. Gross margin on infrastructure products improved due to increased revenues of higher margin moveable barrier product.

Operating Expenses

The Company’s operating expenses of $61.1 million for fiscal 2010 increased $2.8 million compared to fiscal 2009. The increase in operating expenses for fiscal 2010 was primarily attributable to increased investments in product development and higher incentive compensation resulting from improved financial performance. This was partially offset by lower personnel related costs.

Interest, Other Income (Expense), net

Interest expense for fiscal 2010 of $1.6 million decreased $0.5 million compared to the prior fiscal year. The decrease in interest expense is primarily due to principal reductions on the Company’s outstanding term notes. This includes the $7.1 million repayment of the Snoline Term Note in its entirety during the third fiscal quarter.

Interest income for fiscal 2010 decreased by $0.6 million compared to fiscal 2009. The decrease in interest income is due to earning a lower interest rate on investment of the Company’s cash balances.

Other income (expense), net during fiscal 2010 increased to income of $0.1 million from an expense of $0.8 million during the prior fiscal year. The higher expense for fiscal 2009 resulted primarily from foreign currency transaction losses realized from the volatility of exchange rates.

Income Taxes

The Company recorded income tax expense of $11.9 million and $6.7 million for fiscal 2010 and 2009, respectively. The effective tax rate was 32.4% and 32.7%, respectively. For fiscal 2010, the Company recorded discrete items that resulted in a net reduction to income tax expense. The discrete items included a benefit of $0.9 million related to state income tax credits earned in fiscal 2010, a benefit of $0.6 million related to the section 199 domestic production activities deduction, a benefit of $0.3 million for an immaterial correction of previously recorded tax expense and a benefit of $0.3 million for the reversal of previously recorded liabilities for uncertain tax positions. This reversal was recorded due to the expiration of the statute of limitations in the applicable tax jurisdictions without any actual tax liability being assessed. These benefits were slightly offset by additional expense of $0.2 million in the first quarter of fiscal 2010 relating to a tax ruling impacting Lindsay Europe SAS, the Company’s French subsidiary.

For fiscal 2009, the Company recorded discrete items that reduced income tax expense for the period. These included a benefit of $0.1 million related to the reversal of previously recorded liabilities for uncertain tax positions due to the expiration of the statute of limitations as well as a benefit of $0.4 million resulting from finalizing the fiscal 2008 income tax return calculation that was less than the estimated fiscal 2008 income tax provision. The last item was a benefit of $0.4 million related to the section 199 domestic production activities deduction.

Net Earnings

Net earnings were $24.9 million or $1.98 per diluted share for fiscal 2010 compared with $13.8 million or $1.11 per diluted share for the same prior year period. The Company’s operating income increased to $37.8 million for fiscal 2010 compared to $22.4 million for fiscal 2009 due primarily to an increase in revenues and in gross margin, which were partially offset by higher operating costs.

Fiscal 2009 Compared to Fiscal 2008

The following table provides highlights for fiscal 2009 compared with fiscal 2008:

		For the Years Ended								Percent
		August 31,								Increase
$ in thousands		2009				2008				(Decrease)
Consolidated
Operating revenues		$	336,228			$	475,087				(29.2	)%
Cost of operating revenues		$	255,597			$	351,255				(27.2	)%
Gross profit		$	80,631			$	123,832				(34.9	)%
Gross margin			24.0	%			26.1	%
Operating expenses (1)		$	58,214			$	61,593				(5.5	)%
Operating income		$	22,417			$	62,239				(64.0	)%
Operating margin			6.7	%			13.1	%
Interest expense		$	(2,030	)		$	(3,035	)			(33.1	)%
Interest income		$	934			$	1,735				(46.2	)%
Other income (expense), net		$	(782	)		$	172				(554.7	)%
Income tax provision		$	6,716			$	21,706				(69.1	)%
Effective income tax rate			32.7	%			35.5	%
Net earnings		$	13,823			$	39,405				(64.9	)%
Irrigation Equipment Segment (See Note R)
Operating revenues		$	255,507			$	374,906				(31.8	)%
Operating income (2)		$	35,504			$	66,848				(46.9	)%
Operating margin (2)			13.9	%			17.8	%
Infrastructure Products Segment
Operating revenues		$	80,721			$	100,181				(19.4	)%
Operating income (2)		$	(36	)		$	9,624				(100.4	)%
Operating margin (2)			0.0	%			9.6	%

Revenues

Operating revenues for fiscal 2009 decreased by $138.9 million or 29% from fiscal 2008. This decrease was attributable to a 32% decrease in irrigation equipment revenues and a 19% decrease in infrastructure product revenues.

U.S. irrigation revenues decreased $81.1 million or 34% compared to fiscal 2008. The decline in U.S. irrigation equipment revenues was mostly due to a decline in the number of systems shipped compared to fiscal 2008. The Company generally did not reduce prices for its irrigation equipment in order to maintain sales volume or market share. Near-record projected harvests continued to keep commodity prices lower than fiscal 2008. Commodity prices for corn, soybeans, and wheat were lower when compared to the same time in fiscal 2008. USDA projections for 2009 Net Farm Income showed a 38% decline when compared to 2008 estimates and 15% below the ten year average. Throughout the traditional selling season in fiscal 2009, and in the typically slower fourth quarter, farmers remained cautious about making investments in capital goods. International irrigation revenues decreased $38.3 million or 28% compared to fiscal 2008. Export shipments decreased to Australia, Central America, Mexico and the Mideast, but were partially offset by increased exports to China. The net decrease in export irrigation sales was driven by general economic conditions, lower commodity prices and funding availability in developing markets. Revenue from the Company’s international irrigation business units in Brazil, South Africa, and France were also significantly lower as compared to fiscal 2008 for similar reasons. While global farmer sentiment regarding capital goods purchases was impacted by general economic conditions and lower commodity prices, the long-term market drivers remained positive. A growing world-wide population, the benefits of mechanized irrigation in expanding yields and improving water use efficiencies remain a very compelling proposition for farmers.

Infrastructure products segment revenues decreased by $19.5 million or 19% compared to the prior fiscal year. The decrease in infrastructure revenues was primarily attributable to revenues decreasing in the Company’s BSI and Diversified Manufacturing business units. The decrease in revenues for BSI was due to lower sales of moveable barrier projects compared to fiscal 2008. While BSI had anticipated significant revenues in 2009 from an order for a large road project in Mexico City, this project was delayed and was completed in the first half of fiscal 2010. Road infrastructure projects from Federal stimulus funds have been implemented, but it appears that those projects have had minimal incremental effect on demand as States faced reduced tax revenues, resulting in curtailing other planned infrastructure projects. In addition, the early stimulus funds have been applied to “shovel ready” maintenance projects, versus more significant road widening or new road construction projects, which are more likely to use the Company’s moveable barrier and crash cushion products. The decrease in revenues for the Diversified Manufacturing business unit was due to lower sales of tubing to manufacturers of grain handling equipment, also affected by farmers’ sentiment regarding equipment purchases. Diversified Manufacturing revenues were also lower on shipments of railroad signals and structures sold to GE Transportation Systems. During the fourth quarter of fiscal 2009, the Company purchased this product line from GE Transportation Systems and transitioned from contract manufacturing these products to direct sales to the railroads.

Gross Margin

Gross profit was $80.6 million for fiscal 2009 a decrease of $43.2 million compared to fiscal 2008. Gross margin was 24.0% for fiscal 2009 compared to 26.1% for the prior fiscal year. Manufacturing efficiency decreased on irrigation products during fiscal 2009 resulting from significantly reduced factory volume. Gross margin on infrastructure products decreased primarily as a result of unfavorable product mix, manufacturing variances on lower volume, and higher steel costs.

Operating Expenses

The Company’s operating expenses of $58.2 million for fiscal 2009 decreased $3.4 million as compared to fiscal 2008. The decrease in operating expenses for fiscal 2009 was primarily attributable to lower personnel related costs.

Interest, Other Income (Expense), net

Interest expense for fiscal 2009 of $2.0 million decreased by $1.0 million compared to the prior fiscal year. The decrease in interest expense was due to principal reductions on the Company’s two outstanding term notes. In addition, the Company had an outstanding balance of $15.0 million on its revolving line of credit for a portion of fiscal 2008 compared to having no outstanding balances during fiscal 2009.

Interest income for fiscal 2009 decreased by $0.8 million compared to fiscal 2008. The decrease in interest income was primarily due to earning a lower interest rate on investments of the Company’s cash balances.

Other expense, net during fiscal 2009 increased by $1.0 million compared with the same prior year period. This primarily resulted from foreign currency transaction losses realized from the volatility of exchange rates during fiscal 2009.

Income Taxes

The Company recorded income tax expense of $6.7 million and $21.7 million for fiscal 2009 and 2008, respectively. The effective tax rate was 32.7% and 35.5% for fiscal 2009 and 2008, respectively. The effective tax rate for the fiscal year 2009 was lower than the U.S. statutory tax rate primarily due to three items that reduced income tax expense for the period. The first item was a benefit of $0.1 million due to the reversal of previously recorded liabilities for uncertain tax positions relating to taxation of the Company’s Brazilian subsidiary. This reversal was recorded due to the expiration of the statute of limitations without any actual tax liability being assessed. The second item was a benefit of $0.4 million resulting from finalizing the fiscal 2008 income tax return calculation that was less than the estimated fiscal 2008 income tax provision. The third item was a benefit of $0.4 million related to the section 199 domestic production activities deduction.

Net Earnings

Net earnings were $13.8 million or $1.11 per diluted share for fiscal 2009 compared with $39.4 million or $3.20 per diluted share for the same prior year period. The Company’s operating income fell to $22.4 million for fiscal 2009 compared to $62.2 million for fiscal 2008 due primarily to a decline in revenues and in gross margins, which were partially offset by lower operating costs.

Liquidity and Capital Resources

The Company requires cash for financing its receivables and inventories, paying operating costs and capital expenditures, and for dividends. The Company meets its liquidity needs and finances its capital expenditures from its available cash and funds provided by operations along with borrowings under three credit arrangements that are described below.

The Company’s cash and cash equivalents totaled $83.4 million at August 31, 2010 compared with $85.9 million at August 31, 2009.

The Company currently maintains a bank line of credit with Wells Fargo Bank, N.A. and another with Societe Generale to provide additional working capital or to fund acquisitions, if needed. The Company has an unsecured $30.0 million Revolving Credit Note and Credit Agreement with Wells Fargo Bank, N.A. (the “Revolving Credit Agreement”). The Company entered into the First Amendment to the Revolving Credit Agreement (the “Amended Revolving Credit Agreement”), effective as of January 23, 2010, in order to extend the Revolving Credit Agreement’s termination date from January 23, 2010 to January 23, 2012. As of August 31, 2010 and 2009, there were no outstanding balances on the Amended Revolving Credit Agreement.

Borrowings under the Amended Revolving Credit Agreement bear interest at a rate equal to LIBOR plus 120 basis points compared to LIBOR plus 50 basis points under the previous Revolving Credit Agreement, subject to adjustment as set forth in the Amended Revolving Credit Agreement. Interest is repaid on a monthly or quarterly basis depending on loan type. The Company also pays an annual commitment fee of 0.25% on the unused portion of the Amended Revolving Credit Agreement. Unpaid principal and interest is due by January 23, 2012, which is the termination date of the Amended Revolving Credit Agreement.

The Company’s wholly-owned European subsidiary, Lindsay Europe, has an unsecured revolving line of credit with Societe Generale, a European commercial bank, under which it could borrow up to 2.3 million Euros, which equates to approximately $2.9 million as of August 31, 2010, for working capital purposes (the “Euro Line of Credit”). At August 31, 2010 and 2009, there were no borrowings outstanding under the Euro Line of Credit. Under the terms of the Euro Line of Credit, borrowings, if any, bear interest at a floating rate in effect from time to time designated by the commercial bank as the Euro Interbank Offered Rate plus 150 basis points (all inclusive, 1.98% at August 31, 2010). Unpaid principal and interest is due by January 31, 2011, which is the termination date of the Euro Line of Credit. The Company’s management expects to obtain a similar line of credit prior to termination.

The Company entered into an unsecured $30.0 million Term Note and Credit Agreement, each effective as of June 1, 2006, with Wells Fargo Bank, N.A. (collectively, the “BSI Term Note”) to partially finance the acquisition of BSI. Borrowings under the BSI Term Note bear interest at a rate equal to LIBOR plus 50 basis points. However, this variable interest rate has been converted to a fixed rate of 6.05% through an interest rate swap agreement with the lender. Principal is repaid quarterly in equal payments of $1.1 million over a seven-year period that commenced in September, 2006. The BSI Term Note is due in June of 2013.

On December 27, 2006, the Company’s wholly-owned Italian subsidiary entered into an unsecured $13.2 million seven-year Term Note and Credit Agreement (the “Snoline Term Note”) with Wells Fargo Bank, N.A. On May 17, 2010, the Company repaid the $7.1 million outstanding balance on the Snoline Term Note in its entirety. In conjunction with the repayment of the Snoline Term Note, the Company exited the cross currency swap associated with this term note at zero fair value.

The BSI Term Note and the Amended Revolving Credit Agreement (collectively, the “Notes”) each contain the same covenants, including certain covenants relating to Lindsay’s financial condition. These include maintaining a funded debt to EBITDA ratio, a fixed charge coverage ratio, and a current ratio (all as defined in the Notes) at specified levels. In connection with entering into the Amended Revolving Credit Agreement during the second quarter of fiscal 2010, the covenants for each of the Notes were modified by adding a tangible net worth requirement. Upon the occurrence of any event of default of these covenants specified in the Notes, including a change in control of the Company (as defined in the Notes), all amounts due under the Notes may be declared to be immediately due and payable. At August 31, 2010, the Company was in compliance with all loan covenants.

The Company believes its current cash resources, projected operating cash flow, and remaining capacity under its bank lines of credit are sufficient to cover all of its expected working capital needs, planned capital expenditures, dividends, and other cash requirements, excluding potential acquisitions.

Cash flows provided by operations totaled $23.8 million for fiscal 2010 compared to $57.5 million provided by operations during the prior year. Cash provided by operations decreased by $33.7 million primarily due to an increase in cash used for working capital items partially offset by an increase in cash provided by net earnings.

Cash flows used in investing activities totaled $9.7 million for fiscal 2010 compared to cash flows used in investing activities of $12.7 million during fiscal 2009. The decrease in cash used for investing activities was primarily due to a decrease of $4.7 million of purchases of property, plant and equipment and an increase of $1.4 million from proceeds from a note receivable. This was partially offset by an increase of $3.4 million in cash used for an acquisition of a business.

Cash flows used in financing activities totaled $16.2 million for fiscal 2010 compared to cash flows used in financing activities of $9.8 million during the same prior year period. The increase in cash used in financing activities was primarily due to the $7.1 million repayment of the Snoline Term Note during the third quarter of fiscal 2010. This was partially offset by a decrease of $1.6 million in net payments on revolving lines of credit.

Inflation

The Company is subject to the effects of changing prices. During fiscal 2010, the Company realized pricing volatility for purchases of certain commodities, in particular steel and zinc products, used in the production of its products. While the cost outlook for commodities used in the production of the Company’s products is not certain, management believes it can manage these inflationary pressures by introducing appropriate sales price adjustments and by actively pursuing internal cost reduction efforts, while further refining the Company’s inventory and raw materials risk management system. However, competitive market pressures may affect the Company’s ability to pass price adjustments along to its customers.

Contractual Obligations and Commercial Commitments

In the normal course of business, the Company enters into contracts and commitments which obligate the Company to make future payments. The table below sets forth the Company’s significant future obligations by time period. Where applicable, information included in the Company’s consolidated financial statements and notes is cross-referenced in this table.

																				More
$ in thousands		Note						Less than				2-3				4-5				than 5
Contractual Obligations		Reference		Total				1 Year				Years				Years				Years
Leases		O		$	9,161			$	2,111			$	3,329			$	1,430			$	2,291
Term Note Obligation		L			12,857				4,286				8,571				—				—
Interest Expense		L			1,264				681				583				—				—
Unrecognized Tax Benefits (1)		E			1,112				—				—				—				1,112
Supplemental Retirement Plan		P			6,957				557				1,082				1,065				4,253
Total				$	31,351			$	7,635			$	13,565			$	2,495			$	7,656

Market Conditions and Fiscal 2011 Outlook

Commodity prices have risen during the Company’s fourth fiscal quarter with corn up approximately 70%, soybeans up approximately 26% and wheat up over 60% since early June 2010. The August 2010 update for USDA projections for 2010 Net Farm Income indicates a 24% increase compared to 2009 estimates which puts the projected 2010 Net Farm Income as the fourth highest on record. The Company’s management believes that farmer sentiment has improved over last year due to increased commodity prices. Although the decision on equipment purchases for next season is a few months away for the Company’s primary irrigation markets, management expects higher equipment demand if commodity prices remain strong.

In the infrastructure segment the Company continues to experience strong interest in its QMB^® systems which provide a cost effective method for safely managing traffic congestion. Because of the project nature and uniqueness of the moveable barrier product line, it is difficult to estimate the global market size. For planning purposes, the Company maintains a list of potential projects in the moveable barrier product line for traffic mitigation that remains very strong. Management believes stimulus spending has supported increased road safety product sales and quote activity; however, the outlook for infrastructure spending remains uncertain with a multi-year highway bill not expected until sometime in 2011.

Overall, the Company continues to focus on working capital management in all of the Company’s operations. The Company’s focus on improving cash flow has resulted in improving its net cash position by $10.3 million from $60.3 million at August 31, 2009 to $70.6 million at August 31, 2010.

As of August 31, 2010, the Company has an order backlog of $38.4 million compared with $33.9 million at May 31, 2010 and $43.6 million at August 31, 2009. Included in the August 31, 2010 backlog is a $14.8 million project for the Company’s QMB^® system, which is expected to ship in the first half of fiscal 2011. The August 31, 2009 backlog included $19.6 million for the Mexico City QMB^® system project completed in the first half of fiscal 2010. The Company’s backlog can fluctuate from period to period due to the seasonality, cyclicality, timing and execution of contracts. Typically, the Company’s backlog at any point in time usually represents only a portion of the revenue it expects to realize during the following three month period.

In the long term, the global drivers of increasing food production, improving water-use efficiency, expanding bio-fuel production, expanding interest in reducing environmental impacts and improving transportation infrastructure, continue to be positive drivers of demand for the Company’s products. The Company’s strong balance sheet has well-positioned the Company to invest in growth initiatives both organically and through acquisitions.

ITEM 7A — Quantitative and Qualitative Disclosures About Market Risk

The Company uses certain financial derivatives to mitigate its exposure to volatility in interest rates and foreign currency exchange rates. The Company uses these derivative instruments to hedge exposures in the ordinary course of business and does not invest in derivative instruments for speculative purposes. The credit risk under these interest rate and foreign currency agreements is not considered to be significant.

The Company has manufacturing operations in the United States, France, Brazil, Italy, South Africa and China. The Company has sold products throughout the world and purchases certain of its components from third-party international suppliers. Export sales made from the United States are principally U.S. dollar denominated. At times, export sales may be denominated in a currency other than the U.S. dollar. A majority of the Company’s revenue generated from operations outside the United States is denominated in local currency. Accordingly, these sales are not typically subject to significant foreign currency transaction risk. The Company’s most significant transactional foreign currency exposures are the Euro, the Brazilian real, the South African rand and the Chinese renminbi in relation to the U.S. dollar. Fluctuations in the value of foreign currencies create exposures, which can adversely affect the Company’s results of operations.

In order to reduce exposures related to changes in foreign currency exchange rates, the Company, at times, may enter into forward exchange or option contracts for transactions denominated in a currency other than the functional currency for certain of our operations. This activity primarily relates to economically hedging against foreign currency risk in purchasing inventory, sales of finished goods, and future settlement of foreign denominated assets and liabilities. At August 31, 2010, the Company had outstanding forward exchange contracts with cash flow hedging relationships totaling less than $0.1 million included in other current liabilities.

In order to reduce translation exposure resulting from translating the financial statements of its international subsidiaries into U.S. dollars, the Company, at times, utilizes Euro foreign currency forward contracts to hedge its Euro net investment exposure in its foreign operations. At August 31, 2010, the Company had one outstanding Euro foreign currency forward contract to sell 5.0 million Euro on November 24, 2010 at a fixed price of $1.2581 USD per Euro. The forward spot rate at August 31, 2010 was 1.2664 USD per Euro. The Company’s foreign currency forward contract qualifies as a hedge of net investments in foreign operations. Subsequent to August 31, 2010, the Company terminated its one outstanding Euro foreign currency forward contract, resulting in an after-tax net loss of $0.5 million which will be recognized in other comprehensive income as part of the currency translation adjustment, net of tax in its first quarter of fiscal 2011.

In order to reduce interest rate risk on the $30 million BSI Term Note, the Company has entered into an interest rate swap agreement with Wells Fargo Bank, N.A. that is designed to convert the variable interest rate on the entire amount of this borrowing to a fixed rate of 6.05% per annum. Under the terms of the interest rate swap, the Company receives variable interest rate payments and makes fixed interest rate payments on an amount equal to the outstanding balance of the BSI Term Note, thereby creating the equivalent of fixed-rate debt.

ITEM 8 — Financial Statements and Supplementary Data

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders
Lindsay Corporation:

We have audited the accompanying consolidated balance sheets of Lindsay Corporation and subsidiaries (the Company) as of August 31, 2010 and 2009, and the related consolidated statements of operations, shareholders’ equity and comprehensive income, and cash flows for each of the years in the three-year period ended August 31, 2010. In connection with our audits of the consolidated financial statements, we have also audited the financial statement schedule listed in Item 15(a)(2) of this Form 10-K. These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Lindsay Corporation and subsidiaries as of August 31, 2010 and 2009, and the results of their operations and their cash flows for each of the years in the three-year period ended August 31, 2010, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, present fairly, in all material respects, the information set forth therein.

As discussed in the notes to the accompanying consolidated financial statements, the Company adopted the provisions of Financial Accounting Standards Board (FASB) Interpretation No. 48, Accounting for Uncertainty in Income Taxes — an interpretation of FASB Statement No. 109, effective September 1, 2007.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of August 31, 2010, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated November 10, 2010 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

/s/ KPMG LLP

Omaha, Nebraska
November 10, 2010

Lindsay Corporation and Subsidiaries

CONSOLIDATED STATEMENTS OF OPERATIONS

		Years ended August 31,
(in thousands, except per share amounts)		2010				2009				2008
Operating revenues		$	358,440			$	336,228			$	475,087
Cost of operating revenues			259,540				255,597				351,255
Gross profit			98,900				80,631				123,832
Operating expenses:
Selling expense			23,070				22,361				25,177
General and administrative expense			30,196				29,816				30,010
Engineering and research expense			7,792				6,037				6,406
Total operating expenses			61,058				58,214				61,593
Operating income			37,842				22,417				62,239
Other income (expense):
Interest expense			(1,557	)			(2,030	)			(3,035	)
Interest income			352				934				1,735
Other income (expense), net			145				(782	)			172
Earnings before income taxes			36,782				20,539				61,111
Income tax provision			11,920				6,716				21,706
Net earnings		$	24,862			$	13,823			$	39,405
Basic net earnings per share		$	2.00			$	1.12			$	3.30
Diluted net earnings per share		$	1.98			$	1.11			$	3.20
Weighted average shares outstanding			12,451				12,294				11,936
Diluted effect of stock equivalents			134				167				388
Weighted average shares outstanding assuming dilution			12,585				12,461				12,324

The accompanying notes are an integral part of the condensed consolidated financial statements.

Lindsay Corporation and Subsidiaries

CONSOLIDATED BALANCE SHEETS

		August 31,				August 31,
($ in thousands, except par values)		2010				2009
ASSETS
Current Assets:
Cash and cash equivalents		$	83,418			$	85,929
Receivables, net of allowance of $2,244, and $1,864, respectively			63,629				42,862
Inventories, net			45,296				46,255
Deferred income taxes			6,722				6,881
Other current assets			8,946				7,602
Total current assets			208,011				189,529
Property, plant and equipment, net			57,646				59,641
Other intangible assets, net			27,715				29,100
Goodwill, net			27,395				24,174
Other noncurrent assets			4,714				5,453
Total assets		$	325,481			$	307,897
LIABILITIES AND SHAREHOLDERS’ EQUITY
Current Liabilities:
Accounts payable		$	26,501			$	20,008
Current portion of long-term debt			4,286				6,171
Other current liabilities			36,295				33,008
Total current liabilities			67,082				59,187
Pension benefits liabilities			6,400				6,407
Long-term debt			8,571				19,454
Deferred income taxes			10,816				10,391
Other noncurrent liabilities			3,005				4,800
Total liabilities			95,874				100,239
Shareholders’ equity:
Preferred stock, ($1 par value, 2,000,000 shares authorized, no shares issued and outstanding)			—				—
Common stock, ($1 par value, 25,000,000 shares authorized, 18,184,820 and 18,128,743 shares issued at August 31, 2010 and 2009, respectively)			18,185				18,129
Capital in excess of stated value			30,756				28,944
Retained earnings			270,272				249,588
Less treasury stock (at cost, 5,698,448 and 5,763,448 shares at August 31, 2010 and 2009, respectively)			(90,961	)			(91,998	)
Accumulated other comprehensive income, net			1,355				2,995
Total shareholders’ equity			229,607				207,658
Total liabilities and shareholders’ equity		$	325,481			$	307,897

The accompanying notes are an integral part of the condensed consolidated financial statements.

Lindsay Corporation and Subsidiaries

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY AND COMPREHENSIVE INCOME

														Capital in												Accumulated
		Shares of				Shares of								excess of												other				Total
		Common				Treasury				Common				stated				Retained				Treasury				comprehensive				Shareholders’
(in thousands, except per share amounts)		stock				stock				stock				value				earnings				stock				income (loss)				equity
Balance at August 31, 2007			17,744,458				5,998,448			$	17,744			$	11,734			$	204,750			$	(95,749	)		$	2,549			$	141,028
Adoption of FIN 48			—				—				—				—				(756	)			—				—				(756	)
Balance at September 1, 2007			17,744,458				5,998,448			$	17,744			$	11,734			$	203,994			$	(95,749	)		$	2,549			$	140,272
Comprehensive income:
Net earnings			—				—				—				—				39,405				—				—				39,405
Other comprehensive income			—				—				—				—				—				—				2,544				2,544
Total comprehensive income																															41,949
Cash dividends ($0.285) per share			—				—				—				—				(3,419	)			—				—				(3,419	)
Exercise of employee stock options			310,834				(155,000	)			311				4,048				(304	)			2,474				—				6,529
Stock option tax benefits			—				—				—				7,263				—				—				—				7,263
Share-based compensation expense			—				—				—				3,307				—				—				—				3,307
Balance at August 31, 2008			18,055,292				5,843,448			$	18,055			$	26,352			$	239,676			$	(93,275	)		$	5,093			$	195,901
Comprehensive income:
Net earnings			—				—				—				—				13,823				—				—				13,823
Other comprehensive income			—				—				—				—				—				—				(2,098	)			(2,098	)
Total comprehensive income																															11,725
Cash dividends ($0.305) per share			—				—				—				—				(3,754	)			—				—				(3,754	)
Exercise of employee stock options			73,451				(80,000	)			74				225				(157	)			1,277				—				1,419
Stock option tax benefits			—				—				—				293				—				—				—				293
Share-based compensation expense			—				—				—				2,074				—				—				—				2,074
Balance at August 31, 2009			18,128,743				5,763,448			$	18,129			$	28,944			$	249,588			$	(91,998	)		$	2,995			$	207,658
Comprehensive income:
Net earnings			—				—				—				—				24,862				—				—				24,862
Other comprehensive income			—				—				—				—				—				—				(1,640	)			(1,640	)
Total comprehensive income																															23,222
Cash dividends ($0.325) per share			—				—				—				—				(4,051	)			—				—				(4,051	)
Exercise of employee stock options			56,077				(65,000	)			56				(417	)			(127	)			1,037				—				549
Stock option tax benefits			—				—				—				127				—				—				—				127
Share-based compensation expense			—				—				—				2,102				—				—				—				2,102
Balance at August 31, 2010			18,184,820				5,698,448			$	18,185			$	30,756			$	270,272			$	(90,961	)		$	1,355			$	229,607

The accompanying notes are an integral part of the consolidated financial statements.

Lindsay Corporation and Subsidiaries

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

		Years Ended August 31,
($ in thousands)		2010				2009				2008
CASH FLOWS FROM OPERATING ACTIVITIES:
Net earnings		$	24,862			$	13,823			$	39,405
Adjustments to reconcile net earnings to net cash provided by operating activities:
Depreciation and amortization			10,710				10,442				9,253
Provision for uncollectible accounts receivable			732				558				75
Deferred income taxes			(1,500	)			(1,226	)			(886	)
Stock-based compensation expense			2,206				2,140				3,516
(Gain) loss on disposal of fixed assets			(519	)			55				(9	)
Other, net			120				1,302				(3	)
Changes in assets and liabilities:
Receivables			(22,294	)			43,316				(37,267	)
Inventories			827				7,726				(7,959	)
Other current assets			(2,862	)			1,009				113
Accounts payable			6,739				(12,116	)			12,038
Other current liabilities			1,388				(6,965	)			10,748
Current taxes payable			5,287				(3,140	)			3,357
Other noncurrent assets and liabilities			(1,863	)			571				(1,868	)
Net cash provided by operating activities			23,833				57,495				30,513
CASH FLOWS FROM INVESTING ACTIVITIES:
Purchases of property, plant and equipment			(5,784	)			(10,500	)			(14,093	)
Proceeds from sale of property, plant and equipment			606				21				93
Acquisition of business, net of cash acquired			(6,436	)			(3,076	)			(21,028	)
Proceeds from note receivable			1,409				—				—
Proceeds from settlement of net investment hedge			518				859				1,124
Purchases of marketable securities available-for-sale			—				—				(13,860	)
Proceeds from maturities of marketable securities available-for-sale			—				—				41,490
Net cash used in investing activities			(9,687	)			(12,696	)			(6,274	)
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds from issuance of common stock under stock compensation plan			549				1,419				6,530
Proceeds from issuance of long-term debt			—				—				15,000
Principal payments on long-term debt			(12,769	)			(6,171	)			(21,171	)
Net borrowing (payments) on revolving line of credit			—				(1,633	)			1,032
Excess tax benefits from stock-based compensation			76				344				7,263
Dividends paid			(4,051	)			(3,754	)			(3,419	)
Net cash (used in) provided by financing activities			(16,195	)			(9,795	)			5,235
Effect of exchange rate changes on cash			(462	)			165				264
Net (decrease) increase in cash and cash equivalents			(2,511	)			35,169				29,738
Cash and cash equivalents, beginning of period			85,929				50,760				21,022
Cash and cash equivalents, end of period		$	83,418			$	85,929			$	50,760
SUPPLEMENTAL CASH FLOW INFORMATION
Income taxes paid		$	8,368			$	11,081			$	12,262
Interest paid		$	1,648			$	2,146			$	3,066

The accompanying notes are an integral part of the condensed consolidated financial statements.

Lindsay Corporation and Subsidiaries

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

A. DESCRIPTION OF BUSINESS AND SIGNIFICANT ACCOUNTING POLICIES

Lindsay Corporation (the “Company” or “Lindsay”) manufactures automated agricultural irrigation systems and water pumping station controls and sells these products in both U.S. and international markets. The Company also manufactures and markets various infrastructure products, including moveable barriers for traffic lane management, crash cushions, road marking and other road safety devices. In addition, the Company’s infrastructure segment produces large diameter steel tubing and railroad signals and structures, and provides outsourced manufacturing and production services for other companies. The Company’s corporate office is located in Omaha, Nebraska. The Company’s primary U.S. irrigation sales and production facilities are located in Nebraska and Wisconsin. The Company’s international irrigation sales and production facilities are located in France, Brazil, South Africa and China. The Company also owns a retail irrigation dealership with three separate retail locations based in the eastern Washington state region. The Company’s primary infrastructure locations include Rio Vista, California, Omaha, Nebraska and Milan, Italy. These locations manufacture and market moveable and specialty barriers, crash cushions, road marking and safety equipment for use on roadways and railroad signals and structures.

Notes to the consolidated financial statements describe various elements of the financial statements and the accounting policies, estimates, and assumptions applied by management. While actual results could differ from those estimated at the time of preparation of the consolidated financial statements, management believes that the accounting policies, assumptions, and estimates applied promote the representational faithfulness, verifiability, neutrality, and transparency of the accounting information included in the consolidated financial statements.

The significant accounting policies of the Company are as follows:

(1) Principles of Consolidation

The consolidated financial statements include the accounts of the Company and its subsidiaries. Significant intercompany balances and transactions are eliminated in consolidation.

(2) Reclassifications

Certain reclassifications have been made to prior financial statements to conform to the current-year presentation.

(3) Stock Based Compensation

The Company recognizes compensation expense for all share-based payment awards made to employees and directors based on estimated fair values. The Company uses the straight-line amortization method over the vesting period of the awards. The Company has historically issued shares upon exercise of stock options or vesting of restricted stock units or performance stock units from new stock issuances, except for certain non-plan option shares granted in March 2000 that are issued from Treasury Stock upon exercise. At August 31, 2010 there are no remaining non-plan option shares outstanding.

(4) Revenue Recognition

Revenues from the sale of the Company’s irrigation products to its U.S. independent dealers are recognized when the products ship from the factory. The Company generally has no post delivery obligations to its independent dealers other than standard warranties. Revenues from the sale of the Company’s irrigation products to international locations and sales by its international locations are recognized based on the delivery terms in the sales contract. Revenues for retail sales of irrigation products are recognized when the product or service is delivered to the end-user customers. Revenues from the sale of infrastructure products are recognized when the product is delivered to the customer. The Company also leases certain infrastructure products to customers. Revenues for the lease of infrastructure products are recognized on a straight-line basis over the lease term. Revenues and gross profits on intercompany sales are eliminated in consolidation.

The costs related to revenues are recognized in the same period in which the specific revenues are recorded. Shipping and handling revenue is reported as a component of operating revenues. Shipping and handling costs are reported as a component of cost of operating revenues. Shipping and handling revenues and costs are not significant to total operating revenues or cost of operating revenues. Customer rebates, cash discounts, and other sales incentives are recorded as a reduction of revenues at the time of the original sale. Estimates used in the recognition of operating revenues and cost of operating revenues include, but are not limited to, estimates for rebates payable and cash discounts expected.

(5) Receivables and Allowances

Trade receivables are reported on the balance sheet net of any doubtful accounts. Allowances for doubtful accounts are maintained in amounts considered to be appropriate in relation to the receivables outstanding based on collection experience, economic conditions and credit risk quality.

(6) Warranty Costs

The Company’s provision for product warranty reflects management’s best estimate of probable liability under its product warranties. At the time a sale is recognized, the company records the estimated future warranty costs. The Company generally determines its total future warranty liability by applying historical claims rate experience to the amount of equipment that has been sold and is still within the warranty period. In addition, the Company records provisions for known warranty claims. This provision is periodically adjusted to reflect actual experience.

Warranty costs were $3.8 million, $3.6 million, and $3.5 million for the fiscal years ended August 31, 2010, 2009 and 2008, respectively.

(7) Cash and Cash Equivalents

Cash equivalents consist of investments with original maturities of three months or less.

(8) Inventories

Inventories are stated at the lower of cost or market. Cost is determined by the last-in, first-out (LIFO) method for the Company’s Lindsay, Nebraska inventory and two warehouses in Idaho and Texas. Cost is determined by the first-in, first-out (FIFO) method for inventory at the Company’s Omaha, Nebraska warehouse, BSI, Watertronics, China and non-U.S. warehouse locations. Cost is determined by the weighted average cost method for inventory at the Company’s other operating locations in Washington State, France, Brazil, Snoline, and South Africa. At all locations, the Company reserves for obsolete, slow moving, and excess inventory by estimating the net realizable value based on the potential future use of such inventory.

(9) Property, Plant and Equipment

Property, plant, equipment, and capitalized assets held for lease are stated at cost. The Company capitalizes major expenditures and charges to operating expenses the cost of current maintenance and repairs. Provisions for depreciation and amortization have been computed principally on the straight-line method for buildings and equipment. Rates used for depreciation are based principally on the following expected lives: buildings — 15 to 30 years; temporary structures — 5 years; equipment — 3 to 10 years; leased Barrier Transfer Machines — 8 to 10 years; leased barriers — 12 years; other — 2 to 20 years and leasehold improvements — shorter of the economic life or term of the lease. All of the Company’s long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount may not be recoverable. If the sum of the expected future cash flows is less than the carrying amount of the asset, an impairment loss is recognized based upon the difference between the fair value of the asset and its carrying value. During fiscal 2010, 2009 and 2008 no impairment losses were recognized. The cost and accumulated depreciation relating to assets retired or otherwise disposed of are eliminated from the respective accounts at the time of disposition. The resulting gain or loss is included in operating income in the consolidated statements of operations.

(10) Goodwill and Intangible Assets

Goodwill represents the excess of the purchase price over the fair value of net assets acquired in a business combination. Acquired intangible assets are recognized separately from goodwill. Goodwill and intangible assets with indefinite useful lives are tested for impairment at least annually at the reporting unit level using a two-step impairment test. The Company updated its impairment evaluation of goodwill and intangible assets with indefinite useful lives at August 31, 2010. No impairment losses were indicated as a result of the annual impairment testing for fiscal years 2010, 2009, and 2008. The estimates of fair value of its reporting units and related goodwill depend on a number of assumptions, including forecasted sales growth and operating expense ratios. To the extent that the reporting unit is unable to achieve these assumptions, impairment losses may emerge. Intangible assets which have identifiable useful lives are amortized over the term of their useful lives and are tested for impairment upon the occurrence of events that would indicate the assets may be impaired. No impairment losses were recorded in fiscal years 2010, 2009, and 2008.

(11) Income Taxes

Income taxes are accounted for utilizing the asset and liability method of accounting for income taxes. Deferred tax assets and liabilities are recognized for the estimated future tax consequences attributable to differences between the financial statement carrying value of existing assets and liabilities and their respective tax bases. These expected future tax consequences are measured based on currently enacted tax rates. The effect of tax rate changes on deferred tax assets and liabilities is recognized in income during the period that includes the enactment date.

When the Company has claimed tax benefits that may be challenged by a tax authority, the Company recognizes tax benefits only for tax positions that are more likely than not to be sustained upon examination by tax authorities. The amount recognized is measured as the largest amount of benefit that is greater than 50 percent likely to be realized upon settlement. A liability for “unrecognized tax benefits” is recorded for any tax benefits claimed in the Company’s tax returns that do not meet these recognition and measurement standards.

(12) Net Earnings per Share

Basic net earnings per share is computed using the weighted-average number of common shares outstanding during the period. Diluted net earnings per share is computed using the weighted-average number of common shares outstanding plus dilutive potential common shares outstanding during the period. Dilutive potential common shares consist of stock options and restricted stock units to the extent that they are not anti-dilutive. Performance stock units are included in the calculation of dilutive potential common shares once the threshold performance conditions have been satisfied. At August 31, 2010, the threshold performance conditions for the November 16, 2007 grants had been satisfied resulting in the inclusion of 13,395 performance stock units in the calculation of diluted net earnings per share. The threshold performance conditions for the Company’s outstanding performance stock units that were granted on November 3, 2008 and November 12, 2009 had not been satisfied as of August 31, 2010, resulting in the exclusion of 70,693 performance stock units from the calculation of diluted net earnings per share.

Employee equity share options, nonvested shares and similar equity instruments granted by the Company are treated as potential common shares outstanding in computing diluted net earnings per share. The Company’s diluted common shares outstanding reported in each period include the dilutive effect of restricted stock units, in-the-money options, and performance stock units for which threshold performance conditions have been satisfied and is calculated based on the average share price for each fiscal period using the treasury stock method. Under the treasury stock method, the amount the employee must pay for exercising stock options, the amount of compensation cost for future service that the Company has not yet recognized, and the amount of excess tax benefits that would be recorded in additional paid-in-capital when exercised are assumed to be used to repurchase shares.

There were 476 and 24,204 restricted stock units excluded from the calculation of diluted net earnings per share since their inclusion would have been anti-dilutive for the years ended August 31, 2010 and 2009, respectively. There were no anti-dilutive options or restricted stock units for the year ended August 31, 2008.

(13) Use of Estimates

The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

(14) Derivative Instruments and Hedging Activities

The Company uses certain financial derivatives to mitigate its exposure to volatility in interest rates and foreign currency exchange rates. All derivative instruments are recorded on the balance sheet at their respective fair values. On the date a derivative contract is entered into, the Company may elect to designate the derivative as a fair value hedge, a cash flow hedge, or the hedge of a net investment in a foreign operation.

When an election to apply hedge accounting is made, the Company formally documents the hedging relationship and its risk-management objective and strategy for undertaking the hedge, the hedging instrument, the hedged item, the nature of the risk being hedged, how the hedging instrument’s effectiveness in offsetting the hedged risk will be assessed prospectively and retrospectively, and a description of the method of measuring ineffectiveness at the inception of the hedge.

The Company also formally assesses, both at the hedge’s inception and on an ongoing basis, whether the derivative that is used in the hedging transaction is highly effective. Changes in the fair value of a derivative that is highly effective and that is designated and qualifies as a cash flow hedging instrument are recorded in accumulated other comprehensive income, net of related income tax effects, to the extent that the derivative is effective as a hedge, until earnings are affected by the variability in cash flows of the designated hedged item. The ineffective portion of the change in fair value of a derivative instrument that qualifies as a cash-flow hedge is reported in earnings. Changes in fair value of a derivative that is designated and qualifies as a hedge of a net investment in foreign operations are recorded as part of the cumulative translation adjustment included in accumulated other comprehensive income, net of related income tax effects.

The Company discontinues hedge accounting prospectively when it is determined that the derivative is no longer effective in offsetting changes in the cash flows of the hedged item, the derivative expires or is sold, terminated, or exercised, or management determines that designation of the derivative as a hedging instrument is no longer appropriate.

In situations in which the Company does not elect hedge accounting or hedge accounting is discontinued and the derivative is retained, the Company carries or continues to carry the derivative at its fair value on the balance sheet and recognizes any subsequent changes in its fair value through earnings.

(15) Treasury Stock

When the Company repurchases its outstanding stock, it records the repurchased shares at cost as a reduction to shareholders’ equity. The weighted average cost method is then utilized for share re-issuances. The difference between the cost and the re-issuance price is charged or credited to a “capital in excess of stated value — treasury stock” account to the extent that there is a sufficient balance to absorb the charge. If the treasury stock is sold for an amount less than its cost and there is not a sufficient balance in the capital in excess of stated value — treasury stock account, the excess is charged to retained earnings.

(16) Contingencies

The Company’s accounting for contingencies covers a variety of business activities including contingencies for legal exposures and environmental exposures. The Company accrues these contingencies when its assessments indicate that it is probable that a liability has been incurred and an amount can be reasonably estimated. The Company’s estimates are based on currently available facts and its estimates of the ultimate outcome or resolution. Actual results may differ from the Company’s estimates resulting in an impact, positive or negative, on earnings.

(17) Translation of Foreign Currency

The Company’s portion of the assets and liabilities related to foreign investments are translated into U.S. dollars at the exchange rates in effect at the balance sheet date. Revenue and expenses are translated at the average rates of exchange prevailing during the year. Unrealized gains or losses are reflected within common shareholders’ equity as accumulated other comprehensive income or loss.

(18) Recently Issued Accounting Pronouncements

In October 2009, the FASB issued ASU No. 2009-13 (“ASU 2009-13”), which addresses the accounting for multiple-deliverable arrangements to enable vendors to account for products or services (deliverables) separately rather than as a combined unit. ASU 2009-13 is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. The Company is assessing the impact that the adoption of this standard will have on its consolidated financial statements, but expects the impact to be minimal.

B. ACQUISITIONS

In December 2007, the FASB issued guidance amending the accounting and reporting standards for how an acquirer in a business combination recognizes and measures in its financial statements the identifiable assets acquired, liabilities assumed, and noncontrolling interest in the acquiree. In addition, the amended guidance requires that direct costs associated with an acquisition be expensed as incurred. The provisions of this guidance were effective for the Company’s business combinations that took place on or after September 1, 2009.

Digitec, Inc.

On August 31, 2010, the Company completed the acquisition of all outstanding shares of stock of Digitec, Inc., (“Digitec”) based in Milford, Nebraska. Digitec is an electronics research, development and manufacturing company. The addition of Digitec enhances the Company’s capabilities in providing electronic design and integration. Total consideration paid to the selling shareholders was $6.4 million which was financed with cash on hand. The purchase price has been allocated to the tangible and intangible assets and liabilities acquired based on management’s estimates of current fair values. The Company’s preliminary allocation of purchase price was based on the estimated fair value on the date of acquisition and consisted of current assets of $1.2 million (including $0.1 million of cash), fixed assets of $0.8 million, intangible assets of $1.5 million, goodwill of $3.9 million and liabilities of $1.0 million. The fair value assigned to the assets and liabilities acquired is subject to revision as the Company completes its analysis of fair value. Goodwill related to the acquisition of Digitec primarily relates to intangible assets that do not qualify for separate recognition, including the experience and knowledge of Digitec management, its assembled workforce, and its intellectual capital and specialization within the Irrigation industry. Goodwill recorded in connection with this acquisition is non-deductible for income tax purposes. Proforma data is not presented for this acquisition, as it was not considered material.

GE Transportation Systems Global Signaling, LLC

On August 28, 2009, the Company completed the acquisition of certain assets of GE Transportation Systems Global Signaling, LLC (“GE Transportation Systems”). The assets acquired are inventory and product technology for the design and production of structures and lights for railroad signaling. Total consideration was $3.1 million which was financed with cash on hand. The purchase price has been allocated to the tangible and intangible assets acquired based on management’s estimates of current fair values. The Company’s allocation of purchase price consisted of inventory of $1.5 million, fixed assets of $0.1 million, and intangible assets of $1.5 million. No goodwill was recorded in connection with this acquisition. Proforma data is not presented for this acquisition, as it was not considered material.

C. COMPREHENSIVE INCOME

Comprehensive income (loss) was as follows:

		For the years ended August 31,
$ in thousands		2010				2009				2008
Net Income		$	24,862			$	13,823			$	39,405
Other comprehensive income (loss):
Unrealized net gain on available for sale securities			—				—				14
Defined benefit pension plan			(50	)			(501	)			(72	)
Cash flow hedges			1,201				(145	)			(1,065	)
Foreign currency translation, net of hedging activities			(2,791	)			(1,452	)			3,667
Total other comprehensive income (loss), net of tax expense (benefit) of $1,104, ($81) and $11			(1,640	)			(2,098	)			2,544
Total other comprehensive income		$	23,222			$	11,725			$	41,949

Accumulated other comprehensive income is included in the accompanying Consolidated Balance Sheets in the shareholders’ equity section, and consists of the following components:

		For the years ended
		August 31,
$ in thousands		2010				2009
Accumulated other comprehensive income (loss):
Defined benefit pension plan, net of tax of $1,348 and $1,317			(2,208	)			(2,158	)
Cash flow hedges, net of tax of $348 and $867			(572	)			(1,773	)
Foreign currency translation, net of hedging activities, net of tax of $1,368 and $752			4,135				6,926
Total accumulated other comprehensive income		$	1,355			$	2,995

D. OTHER INCOME (EXPENSE), NET

		For the years ended August 31,
$ in thousands		2010				2009				2008
Other income (expense), net:
Cash surrender value of life insurance		$	42			$	78			$	87
Foreign currency transaction (loss) gain, net			45				(1,044	)			603
All other, net			58				184				(518	)
Total other income (expense), net		$	145			$	(782	)		$	172

E. INCOME TAXES

For financial reporting purposes earnings before income taxes include the following components:

		For the years ended August 31,
$ in thousands		2010				2009				2008
United States		$	34,165			$	18,385			$	56,550
Foreign			2,617				2,154				4,561
		$	36,782			$	20,539			$	61,111

Significant components of the income tax provision are as follows:

		For the years ended August 31,
$ in thousands		2010				2009				2008
Current:
Federal		$	11,077			$	6,479			$	19,505
State			770				489				1,379
Foreign			1,573				974				1,708
Total current			13,420				7,942				22,592
Deferred:
Federal			501				(938	)			(295	)
State			(1,364	)			(52	)			(217	)
Foreign			(637	)			(236	)			(374	)
Total deferred			(1,500	)			(1,226	)			(886	)
Total income tax provision		$	11,920			$	6,716			$	21,706

Total income tax provision resulted in effective tax rates differing from that of the statutory United States Federal income tax rates. The reasons for these differences are:

		For the years ended August 31,
		2010								2009								2008
$ in thousands		Amount				%				Amount				%				Amount				%
U.S. statutory rate		$	12,874				35.0			$	7,189				35.0			$	21,389				35.0
State and local taxes, net of federal tax benefit			35				0.1				275				1.3				795				1.3
State tax credits			(888	)			(2.4	)			—				—				—				—
Foreign tax rate differences			(122	)			(0.3	)			(302	)			(1.5	)			(123	)			(0.2	)
Domestic production activities deduction			(608	)			(1.7	)			(385	)			(1.9	)			(438	)			(0.7	)
Tax-exempt interest income			(7	)			(0.0	)			(37	)			(0.1	)			(119	)			(0.2	)
R&D, Phone, and Fuel tax credits			(28	)			(0.1	)			(96	)			(0.5	)			(265	)			(0.4	)
Non-deductible officer’s compensation			—				—				—				—				(463	)			(0.8	)
Other			664				1.8				72				0.4				930				1.5
Effective rate		$	11,920				32.4			$	6,716				32.7			$	21,706				35.5