e10vq
Table of Contents

 
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-Q
(Mark One)
     
þ   QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended June 30, 2010
or
     
o   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                      to                     
Commission file number: 001-33059
FUEL TECH, INC.
(Exact name of registrant as specified in its charter)
     
Delaware
(State or other jurisdiction of incorporation of organization)
  20-5657551
(I.R.S. Employer Identification Number)
Fuel Tech, Inc.
27601 Bella Vista Parkway
Warrenville, IL 60555-1617
630-845-4500
(Address and telephone number of principal executive offices)
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Yes þ    No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o   No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definition of “accelerated filer”, “large accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
             
Large accelerated filer o   Accelerated filer þ   Non-accelerated filer o (Do not check if a smaller reporting company)   Smaller reporting company o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o   No þ
As of July 10, 2010 there were outstanding 24,213,467 shares of Common Stock, par value $0.01 per share, of the registrant.
 
 

 


 

FUEL TECH, INC.
Form 10-Q for the six-month period ended June 30, 2010
INDEX
         
    Page  
       
 
       
       
 
       
    1  
 
       
    2  
 
       
    3  
 
       
    4  
 
       
    14  
 
       
    17  
 
       
    17  
 
       
       
 
       
    18  
    18  
    18  
    18  
 
       
    18  
 EX-10.1
 EX-31.1
 EX-31.2
 EX-32

 


Table of Contents

PART I. FINANCIAL INFORMATION
Item 1. Financial Statements
FUEL TECH, INC.
CONDENSED CONSOLIDATED BALANCE SHEETS
(in thousands, except share and per share data)
                 
    June 30,     December 31,  
    2010     2009  
    (Unaudited)     (Note B)  
Assets
               
Current assets:
               
Restricted cash
  $     $ 200  
Cash and cash equivalents
    21,066       20,965  
Accounts receivable, net of allowance for doubtful accounts of $72 and $70, respectively
    22,310       17,877  
Inventories
    445       450  
Deferred income taxes
    636       636  
Prepaid expenses and other current assets
    2,095       2,294  
 
           
Total current assets
    46,552       42,422  
 
               
Equipment, net of accumulated depreciation of $15,723 and $14,562, respectively
    14,536       15,549  
Goodwill
    21,051       21,051  
Other intangible assets, net of accumulated amortization of $3,260 and $2,817, respectively
    6,358       6,749  
Deferred income taxes
    5,070       4,183  
Other assets
    2,447       2,308  
 
           
Total assets
  $ 96,014     $ 92,262  
 
           
 
               
Liabilities and Shareholders’ Equity
               
Current liabilities:
               
Short-term debt
  $ 2,203     $ 2,925  
Accounts payable
    5,836       5,824  
Accrued liabilities:
               
Employee compensation
    1,572       671  
Other accrued liabilities
    3,575       2,424  
 
           
Total current liabilities
    13,186       11,844  
 
               
Other liabilities
    2,243       2,196  
 
           
Total liabilities
    15,429       14,040  
 
               
Shareholders’ equity:
               
Common stock, $.01 par value, 40,000,000 shares authorized, 24,213,467 and 24,211,967 shares issued, respectively
    242       242  
Additional paid-in capital
    128,038       125,458  
Accumulated deficit
    (47,923 )     (47,828 )
Accumulated other comprehensive income
    152       269  
Nil coupon perpetual loan notes
    76       81  
 
           
Total shareholders’ equity
    80,585       78,222  
 
           
Total liabilities and shareholders’ equity
  $ 96,014     $ 92,262  
 
           
See notes to condensed consolidated financial statements.

1


Table of Contents

FUEL TECH, INC.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(Unaudited)
(in thousands, except share and per-share data)
                                 
    Three Months Ended     Six Months Ended  
    June 30     June 30  
    2010     2009     2010     2009  
Revenues
  $ 18,902     $ 18,922     $ 36,519     $ 36,239  
 
                               
Costs and expenses:
                               
Cost of sales
    11,067       10,378       20,567       21,752  
Selling, general and administrative
    8,018       8,876       15,498       17,130  
Research and development
    165       77       311       231  
 
                       
 
    19,250       19,331       36,376       39,113  
 
                       
 
                               
Operating (loss) income
    (348 )     (409 )     143       (2,874 )
 
                               
Interest expense
    (33 )     (26 )     (77 )     (56 )
Interest income
    1       7       2       23  
Other expense
    (166 )     (38 )     (258 )     (162 )
 
                       
Loss before taxes
    (546 )     (466 )     (190 )     (3,069 )
 
                               
Income tax benefit
    237       188       95       1,229  
 
                       
 
                               
Net loss
  $ (309 )   $ (278 )   $ (95 )   $ (1,840 )
 
                       
 
                               
Net loss per Common Share:
                               
Basic
  $ (0.01 )   $ (0.01 )   $ (0.00 )   $ (0.08 )
 
                       
Diluted
  $ (0.01 )   $ (0.01 )   $ (0.00 )   $ (0.08 )
 
                       
 
                               
Weighted-average number of Common Shares outstanding:
                               
Basic
    24,215,000       24,126,000       24,213,000       24,119,000  
 
                       
Diluted
    24,215,000       24,126,000       24,213,000       24,119,000  
 
                       
See notes to condensed consolidated financial statements.

2


Table of Contents

FUEL TECH, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(Unaudited)
(in thousands)
                 
    Six Months Ended  
    June 30  
    2010     2009  
Operating activities
               
Net cash provided by operating activities
  $ 1,327     $ 4,691  
 
           
 
               
Investing activities
               
Acquisition of business
          (19,328 )
Reduction in restricted cash
    200        
Purchases of property, equipment and intangible assets
    (642 )     (1,540 )
 
           
Net cash used in investing activities
    (442 )     (20,868 )
 
           
 
               
Financing activities
               
(Payments) proceeds of/from short-term borrowings
    (722 )     3  
Issuance of deferred shares
    50       43  
Proceeds from exercise of stock options and warrants
    10       124  
Redemption of nil coupon loan note
    (5 )      
 
           
Net cash (used in) provided by financing activities
    (667 )     170  
 
           
 
               
Effect of exchange rate fluctuations on cash
    (117 )     35  
 
           
 
               
Net increase (decrease) in cash and cash equivalents
    101       (15,972 )
 
               
Cash and cash equivalents at beginning of period
    20,965       28,149  
 
           
 
               
Cash and cash equivalents at end of period
  $ 21,066     $ 12,177  
 
           
 
               
Supplemental disclosure of cash flow information:
               
Increase in contingent consideration payable
  $     $ 2,307  
See notes to condensed consolidated financial statements.

3


Table of Contents

FUEL TECH, INC.
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
June 30, 2010
(Unaudited)
(in thousands, except share and per-share data)
Note A: Nature of Business
Fuel Tech, Inc. (Fuel Tech or the Company) is a fully integrated company that uses a suite of advanced technologies to provide boiler optimization, efficiency improvement and air pollution reduction and control solutions to utility and industrial customers worldwide. Originally incorporated in 1987 under the laws of the Netherlands Antilles as Fuel-Tech N.V., Fuel Tech became domesticated in the United States on September 30, 2006, and continues as a Delaware corporation with its corporate headquarters at 27601 Bella Vista Parkway, Warrenville, Illinois, 60555-1617. Fuel Tech maintains an Internet website at www.ftek.com. Fuel Tech’s annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934 are made available through our website as soon as reasonably practical after electronically filed or furnished to the Securities and Exchange Commission. Also available on the Fuel Tech’s website are the Company’s Corporate Governance Guidelines and Code of Ethics and Business Conduct, as well as the charters of the Audit and Compensation & Nominating committees of the Board of Directors. All of these documents are available in print without charge to stockholders who request them. Information on our website is not incorporated into this report.
Fuel Tech’s special focus is the worldwide marketing of its nitrogen oxide (NOx) reduction and FUEL CHEM® processes. The Air Pollution Control (APC) technology segment reduces NOx emissions in flue gas from boilers, incinerators, furnaces and other stationary combustion sources by utilizing combustion optimization techniques and Low NOx and Ultra Low NOx Burners; Over-Fire Air systems, NOxOUT® and HERT High Energy Reagent Technology™ SNCR systems; systems that incorporate ASCR (Advanced Selective Catalytic Reduction) technology including CASCADE; ULTRAand NOxOUT-SCR® processes; and Ammonia Injection Grids (AIG) and the Graduated Straightening Grid (GSG™). The FUEL CHEM® technology segment improves the efficiency, reliability and environmental status of combustion units by controlling slagging, fouling and corrosion, as well as the formation of sulfur trioxide, ammonium bisulfate, particulate matter (PM2.5), carbon dioxide, NOx and unburned carbon in fly ash through the addition of chemicals into the fuel or via TIFI® Targeted In-Furnace Injection™ programs. Fuel Tech has other technologies, both commercially available and in the development stage, all of which are related to APC and FUEL CHEM technology segments or are similar in their technological base. Fuel Tech’s business is materially dependent on the continued existence and enforcement of worldwide air quality regulations.
Note B: Basis of Presentation
The accompanying unaudited, condensed consolidated financial statements have been prepared in accordance with generally accepted accounting principles for interim financial information and with the instructions to Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by accounting principles generally accepted in the United States for complete financial statements. In the opinion of management, all adjustments (consisting of normal recurring accruals) considered necessary for a fair presentation of the balance sheet and results of operations for the periods covered have been included and all significant intercompany transactions and balances have been eliminated. The results of operations of all acquired businesses have been consolidated for all periods subsequent to the date of acquisition.
The balance sheet at December 31, 2009 has been derived from the audited financial statements at that date, but does not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements.
For further information, refer to the consolidated financial statements and footnotes thereto included in Fuel Tech’s Annual Report on Form 10-K for the year ended December 31, 2009 as filed with the Securities and Exchange Commission.

4


Table of Contents

Note C: Revenue Recognition Policy
Revenues from the sales of chemical products are recorded when title transfers, either at the point of shipment or at the point of destination, depending on the contract with the customer.
Fuel Tech uses the percentage of completion method of accounting for equipment construction and license contracts that are sold within the APC technology segment. Under the percentage of completion method, revenues are recognized as work is performed based on the relationship between actual construction costs incurred and total estimated costs at completion. Revisions in completion estimates and contract values in the period in which the facts giving rise to the revisions become known can influence the timing of when revenues are recognized under the percentage of completion method of accounting. Provisions are made for estimated losses on uncompleted contracts in the period in which such losses are determined. As of June 30, 2010 the Company had one construction contract in progress that was identified as a loss contract in the amount of $348.
Fuel Tech’s APC contracts are typically six to twelve months in length. A typical contract will have three or four critical operational measurements that, when achieved, serve as the basis for us to invoice the customer via progress billings. At a minimum, these measurements will include the generation of engineering drawings, the shipment of equipment and the completion of a system performance test.
As part of a majority of its contractual APC project agreements, Fuel Tech will agree to customer-specific acceptance criteria that relate to the operational performance of the system that is being sold. These criteria are determined based on mathematical modeling that is performed by Fuel Tech personnel, which is based on operational inputs that are provided by the customer. The customer will warrant that these operational inputs are accurate as they are specified in the binding contractual agreement. Further, the customer is solely responsible for the accuracy of the operating condition information; all performance guarantees and equipment warranties granted by us are void if the operating condition information is inaccurate or is not met.
Fuel Tech has installed over 580 units with APC technology. As part of the project implementation process, we perform system start-up and optimization services that effectively serve as a test of actual project performance. We believe that this test, combined with the accuracy of the modeling that is performed, enables revenue to be recognized prior to the receipt of formal customer acceptance.
Accounts receivable includes unbilled receivables, representing revenues recognized in excess of billings on uncompleted contracts under the percentage of completion method of accounting. At June 30, 2010 and December 31, 2009, unbilled receivables were approximately $10,973 and $8,466, respectively. Billings in excess of costs and estimated earnings on uncompleted contracts were $526 and $373, at June 30, 2010 and December 31, 2009, respectively. Such amounts are included in other accrued liabilities on the consolidated balance sheet.
Note D: Cost of Sales
Cost of sales includes all internal and external engineering costs, equipment and chemical charges, inbound and outbound freight expenses, internal and site transfer costs, installation charges, purchasing and receiving costs, inspection costs, warehousing costs, project personnel travel expenses and other direct and indirect expenses specifically identified as project- or product line-related, as appropriate (e.g., test equipment depreciation and certain insurance expenses). Certain depreciation and amortization expenses related to tangible and intangible assets, respectively, are also allocated to cost of sales.
Note E: Selling, General and Administrative Expenses
Selling, general and administrative expenses primarily include the following categories except where an allocation to the cost of sales line item is warranted due to the project- or product-line nature of a portion of the expense category: salaries and wages, employee benefits, non-project travel, insurance, legal, rent, accounting and auditing, recruiting, telephony, employee training, Board of Directors’ fees, auto rental, office supplies, dues and subscriptions, utilities, real estate taxes, commissions and bonuses, marketing materials, postage and business taxes. Departments comprising the selling, general and administrative line item primarily include the functions of executive management, finance and accounting, investor relations, regulatory affairs, marketing, business development, information technology, human resources, sales, legal and general administration.

5


Table of Contents

Note F: Earnings per Share Data
Basic earnings per share excludes the dilutive effects of stock options and warrants and of the nil coupon non-redeemable convertible unsecured loan notes. Diluted earnings per share includes the dilutive effect of stock options and warrants and of the nil coupon non-redeemable convertible unsecured loan notes. The following table sets forth the weighted-average shares used in calculating the earnings per share for the three- and six-month periods ended June 30, 2010 and 2009:
                                 
    Three Months Ended     Six Months Ended  
    June 30     June 30  
    2010     2009     2010     2009  
Basic weighted-average shares
    24,215       24,126       24,213       24,119  
Conversion of unsecured loan notes
                       
Unexercised options and warrants
                       
 
                       
Diluted weighted-average shares
    24,215       24,126       24,213       24,119  
 
                       
Note G: Total Comprehensive (Loss)
Total comprehensive loss for Fuel Tech is comprised of net income and the impact of foreign currency translation as follows:
                                 
    Three Months Ended     Six Months Ended  
    June 30     June 30  
    2010     2009     2010     2009  
Comprehensive loss:
                               
Net loss
  $ (309 )   $ (278 )     (95 )   $ (1,840 )
Foreign currency translation
    (58 )     50       (117 )     35  
 
                       
 
  $ (367 )   $ (228 )     (212 )   $ (1,805 )
 
                       

6


Table of Contents

Note H: Stock-Based Compensation
Fuel Tech has a stock-based employee compensation plan, referred to as the Fuel Tech, Inc. Incentive Plan (Incentive Plan), under which awards may be granted to participants in the form of Non-Qualified Stock Options, Incentive Stock Options, Stock Appreciation Rights, Restricted Stock, Performance Awards, Bonuses or other forms of share-based or non-share-based awards or combinations thereof. Participants in the Incentive Plan may be Fuel Tech’s directors, officers, employees, consultants or advisors (except consultants or advisors in capital-raising transactions) as the directors determine are key to the success of Fuel Tech’s business. The amount of shares that may be issued or reserved for awards to participants under a 2004 amendment to the Incentive Plan is 12.5% of outstanding shares calculated on a diluted basis. At June 30, 2010, Fuel Tech has 515,000 stock options available for issuance under the Incentive Plan.
Fuel Tech utilizes the Black-Scholes option-pricing model to estimate the fair value of stock option grants. The Company recorded stock-based compensation expense for the three- and six-month periods ended June 30, 2010 of $1,167 and $2,519, respectively. Fuel Tech recorded $1,770 and $3,166 in stock-based compensation expense for the comparable periods in 2009.
The awards granted under the Incentive Plan have a 10-year life and they vest as follows: 50% after the second anniversary of the award date, 25% after the third anniversary, and the final 25% after the fourth anniversary of the award date. Fuel Tech calculates stock compensation expense based on the grant date fair value of the award and recognizes expense on a straight-line basis over the four-year service period of the award.
The principal variable assumptions utilized in valuing options and the methodology for estimating such model inputs include: (1) risk-free interest rate — an estimate based on the yield of zero—coupon treasury securities with a maturity equal to the expected life of the option; (2) expected volatility — an estimate based on the historical volatility of Fuel Tech’s Common Stock for a period equal to the expected life of the option; and (3) expected life of the option — an estimate based on historical experience including the effect of employee terminations.
Based on the results of the model, the weighted-average fair value of the stock options granted during the six-month period ended June 30, 2010 was $3.27 per share using the following assumptions:
         
    2010  
Expected dividend yield
    0.00 %
 
       
Risk-free interest rate
    1.92 %
 
       
Expected volatility
    67.94 %
 
       
Expected life of option
  5.5 years

7


Table of Contents

Stock option activity for Fuel Tech’s Incentive Plan for the six months ended June 30, 2010 was as follows:
                                 
    Number     Weighted-     Weighted- Average        
    of     Average     Remaining     Aggregate Intrinsic  
    Options     Exercise Price     Contractual Term     Value  
Outstanding on January 1, 2010
    3,051,125     $ 15.28                  
Granted
    70,000     $ 5.50                  
Exercised
    1,500     $ 6.35                  
Expired or forfeited
    (249,250 )   $ 17.16                  
 
                             
Outstanding on June 30, 2010
    2,870,375     $ 14.89     6.4 years   $ 920  
 
                             
 
                               
Exercisable on June 30, 2010
    2,082,500     $ 14.30     5.8 years   $ 920  
Non-vested stock award activity for all plans for the six months ended June 30, 2010 was as follows:
         
    Non-vested  
    Stock  
    Outstanding  
Outstanding on January 1, 2010
    1,267,125  
Granted
    70,000  
Released
    (326,000 )
Expired or forfeited
    (223,250 )
 
     
Outstanding on June 30, 2010
    787,875  
 
     
As of June 30, 2010, there was $5,511 of total unrecognized compensation cost related to non-vested stock-based compensation arrangements granted under the Incentive Plan. That cost is expected to be recognized over a period of four years.
In addition to the Incentive Plan, Fuel Tech has a Deferred Compensation Plan for Directors (Deferred Plan). This Deferred Plan, as originally approved, provided for deferral of directors’ fees in the form of either cash with interest or as “phantom stock” units, in either case, however, to be paid out only as cash and not as stock at the elected time of payout. In the second quarter of 2007, Fuel Tech obtained stockholder approval for an amendment to the Deferred Plan to provide that instead of phantom stock units paid out only in cash, the deferred stock unit compensation may be paid out in shares of Fuel Tech Common Stock. Under the guidance of ASC 718-10, this plan modification required that Fuel Tech account for awards under the plan for the receipt of Fuel Tech Common Stock, as equity awards as opposed to liability awards. For the six months ended June 30, 2010, Fuel Tech recorded stock-based compensation expense of $50 with a credit of the same amount to additional paid-in capital representing the fair value of the stock awards granted.
At June 30, 2010, Fuel Tech had 2,264,000 stock options with exercise prices per share that were not dilutive for the purpose of inclusion in the calculation of diluted earnings per share.
Note I: Debt
On June 30, 2009, Fuel Tech entered into a $25,000 revolving credit facility (the Facility) with JPMorgan Chase Bank, N.A (JPM Chase). The Facility has a term of two years through June 30, 2011, is unsecured, bears interest at a rate of LIBOR plus a spread range of 250 basis points to 375 basis points, as determined under a formula related to the Company’s leverage ratio, and has the Company’s Italian subsidiary, Fuel Tech S.r.l., as a guarantor. Fuel Tech can use this Facility for cash advances and standby letters of credit. As of June 30, 2010, there were no outstanding borrowings on this Facility.

8


Table of Contents

At its inception, the Facility contained several debt covenants with which the Company must comply on a quarterly or annual basis, including: an annual capital expenditure limit of $10,000 and a minimum net income for the quarterly period ended September 30, 2009 of $750. For subsequent periods, the Facility covenants included an annual capital expenditure limited of $10,000, a maximum funded debt to EBITDA ratio of 2.75:1.0 for the quarterly period ended June 30, 2010 and a maximum funded debt to EBITDA ratio of 1.5:1.0 for all succeeding quarterly periods until the facility expires. Maximum funded debt is defined as all borrowed funds, outstanding standby letters of credit and bank guarantees. EBITDA includes after tax earnings with add backs for interest expense, income taxes, and depreciation and amortization expenses. In addition, the Company must maintain a minimum tangible net worth of $42,000, adjusted upward for 50% of net income generated and 100% of all capital issuances.
As of June 30, 2010, the Company was in compliance with all debt covenants of the Facility, including a year-to-date capital expenditure amount of $642 and a tangible net worth amount of $53,174 which was above the required amount of $50,262 by $2,912.
Beijing Fuel Tech Environmental Technologies Company, Ltd. (Beijing Fuel Tech), a wholly-owned subsidiary of Fuel Tech, has a revolving credit facility (the China Facility) agreement with JPM Chase for RMB 45 million (approximately $6,600), which expires on June 30, 2011. The facility is unsecured, bears interest at a rate of 120% of the People’s Bank of China (PBOC) Base Rate and does not contain any material debt covenants. Beijing Fuel Tech can use this facility for cash advances and bank guarantees. As of June 30, 2010, Beijing Fuel Tech has borrowings outstanding in the amount $2,203, which bears interest at 5.8% .
At June 30, 2010, the Company had outstanding standby letters of credit and bank guarantees, predominantly to customers, totaling approximately $1,299 in connection with contracts in process. Fuel Tech is committed to reimbursing the issuing bank for any payments made by the bank under these instruments. At June 30, 2010, there were no cash borrowings under the revolving credit facility and approximately $23,701 was available.
In the event of default on either the Facility or the China Facility, the cross default feature in each allows the lending bank to accelerate the payment of any amounts outstanding and may, under certain circumstances, allow the bank to cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy the payment due, may require the Company to obtain alternate financing to satisfy the accelerated payment.
Note J: Business Segment and Geographic Disclosures
Fuel Tech segregates its financial results into two reportable segments representing two broad technology segments as follows:
  -   The Air Pollution Control technology segment, which includes the Low- and Ultra-low NOx Burners, over-fire air systems, HERT system, NOxOUT®, CASCADE, AIG, GSG, ULTRA and NOxOUT-SCR® processes for the reduction of NOx emissions in flue gas from boilers, incinerators, furnaces and other stationary combustion sources; and
 
  -   The FUEL CHEM® technology segment, which uses chemical processes for the control of slagging, fouling, corrosion, opacity, acid plume and sulfur trioxide-related issues in furnaces and boilers through the addition of chemicals into the fuel using TIFI® Targeted In-Furnace Injection technology.
The “Other” classification includes those profit and loss items not allocated by Fuel Tech to each reportable segment. Further, there are no intersegment sales that require elimination.
Fuel Tech evaluates performance and allocates resources based on reviewing gross margin by reportable segment. The accounting policies of the reportable segments are the same as those described in the summary of significant accounting policies. Fuel Tech does not review assets by reportable segment, but rather, in aggregate for Fuel Tech as a whole.

9


Table of Contents

                                 
Three months ended   Air Pollution                    
June 30, 2010   Control Segment     FUEL CHEM Segment     Other     Total  
Revenues from external customers
  $ 9,291     $ 9,611     $     $ 18,902  
Cost of sales
    6,046       5,021             11,067  
Gross margin
    3,245       4,590             7,835  
Selling, general and administrative
                8,018       8,018  
Research and development
                165       165  
Operating income (loss)
  $ 3,245     $ 4,590     $ 8,183     $ (348 )
 
                       
                                 
Three months ended   Air Pollution                    
June 30, 2009   Control Segment     FUEL CHEM Segment     Other     Total  
Revenues from external customers
  $ 9,177     $ 9,745     $     $ 18,922  
Cost of sales
    4,688       5,690             10,378  
Gross margin
    4,489       4,055             8,544  
Selling, general and administrative
                8,876       8,876  
Research and development
                77       77  
Operating income (loss)
  $ 4,489     $ 4,055     $ 8,953     $ (409 )
 
                       
                                 
Six months ended   Air Pollution                    
June 30, 2010   Control Segment     FUEL CHEM Segment     Other     Total  
Revenues from external customers
  $ 17,505     $ 19,014     $     $ 36,519  
Cost of sales
    11,304       9,263             20,567  
Gross margin
    6,201       9,751             15,952  
Selling, general and administrative
                15,498       15,498  
Research and development
                311       311  
Operating income (loss)
  $ 6,201     $ 9,751     $ 15,809     $ 143  
 
                       
                                 
Six months ended   Air Pollution                    
June 30, 2009   Control Segment     FUEL CHEM Segment     Other     Total  
Revenues from external customers
  $ 17,997     $ 18,242     $     $ 36,239  
Cost of sales
    11,007       10,745             21,752  
Gross margin
    6,990       7,497             14,487  
Selling, general and administrative
                17,130       17,130  
Research and development
                231       231  
Operating income (loss)
  $ 6,990     $ 7,497     $ 17,361     $ (2,874 )
 
                       

10


Table of Contents

Information concerning Fuel Tech’s operations by geographic area is provided below. Revenues are attributed to countries based on the location of the customer. Assets are those directly associated with operations of the geographic area.
                                 
    Three months ended June 30     Six months ended June 30  
    2010     2009     2010     2009  
Revenues:
                               
United States
  $ 14,461     $ 14,722     $ 29,502     $ 29,060  
Foreign
    4,441       4,200       7,017       7,179  
 
                       
 
  $ 18,902     $ 18,922     $ 36,519     $ 36,239  
 
                       
                 
    June 30,     December 31,  
    2010     2009  
Assets:
               
United States
  $ 85,696     $ 82,261  
Foreign
    10,318       10,001  
 
           
 
  $ 96,014     $ 92,262  
 
           
Note K: Contingencies
Fuel Tech issues a standard product warranty with the sale of its products to customers. Fuel Tech’s recognition of warranty liability is based, generally, on analyses of warranty claims experience in the preceding years. Our recognition of warranty liability is based primarily on analyses of warranty claims experienced in the preceding years as the nature of our historical product sales for which we offer a warranty are substantially unchanged. This approach provides an aggregate warranty accrual that is historically aligned with actual warranty claims experienced.
Changes in the warranty liability for the six months ended June 30, 2010 are summarized below:
         
Aggregate product warranty liability at January 1, 2010
  $ 199  
Aggregate accruals related to product warranties
    60  
Aggregate reductions for payments
    (57 )
 
     
Aggregate product warranty liability at June 30, 2010
  $ 202  
 
     
Note L: Income Tax
Fuel Tech had unrecognized tax benefits as of December 31, 2009 in the amount of $870. This amount included $840 of unrecognized tax benefits which, if ultimately recognized, will reduce Fuel Tech’s annual effective tax rate. There have been no material changes in unrecognized tax benefits during the six months ended June 30, 2010.

11


Table of Contents

Note M: Recently Adopted Accounting Pronouncements
In February 2010, the Financial Accounting Standards Board (FASB) issued amended guidance on subsequent events. Under this amended guidance, SEC filers are no longer required to disclose the date through which subsequent events have been evaluated in originally issued and revised financial statements. This guidance was effective immediately and we adopted these new requirements for the quarter ended March 31, 2010.
In January 2010, the FASB issued authoritative guidance that expands the required disclosures about fair value measurements. This guidance provides for new disclosures requiring the Company to (i) disclose separately the amounts of significant transfers in and out of Level 1 and Level 2 fair value measurements and describe the reasons for the transfers and (ii) present separately information about purchases, sales, issuances and settlements in the reconciliation of Level 3 fair value measurements. This guidance also provides clarification of existing disclosures requiring the Company to (i) determine each class of assets and liabilities based on the nature and risks of the investments rather than by major security type and (ii) for each class of assets and liabilities, disclose the valuation techniques and inputs used to measure fair value for both Level 2 and Level 3 fair value measurements. This guidance became effective for Fuel Tech on January 1, 2010, except for the presentation of purchases, sales, issuances and settlements in the reconciliation of Level 3 fair value measurements, which is effective for Fuel Tech on January 1, 2011, and did not have a material impact on the Company’s consolidated financial statements. The guidance pertaining to the presentation of purchases, sales, issuances and settlements in the reconciliation of Level 3 fair value measurements is not expected to have a material impact on the Company’s consolidated financial statements.
Note N: Business Acquisitions
Fuel Tech accounts for its acquisitions as purchases in accordance with ASC 805. Accordingly, in connection with each acquisition, the purchase price is allocated to the estimated fair values of all acquired tangible and intangible assets and assumed liabilities as of the date of the acquisition.
Advanced Combustion Technology, Inc.
On January 5, 2009, Fuel Tech completed its acquisition of substantially all of the assets of Advanced Combustion Technology, Inc. (ACT or the ACT Acquisition) for approximately $22,500 in cash, including transaction costs, plus future consideration if certain financial performance is achieved. In connection with the final determination of the Adjustment Calculation (as defined in the asset purchase agreement) related to the net working capital amount, Fuel Tech paid ACT an additional $1,523 on July 23, 2009. All of the goodwill recognized is expected to be deductible for income tax purposes. Operating results related to the acquisition of substantially all of the assets of ACT and all of the related goodwill are reported as part of the APC Technology segment. Acquisition related costs, including out-of-pocket expenses related to the transaction, were insignificant.
Below is a breakdown of amounts recognized as of the acquisition date for each major class of assets acquired and liabilities assumed as a result of the Company’s acquisition of ACT:
         
Identifiable assets acquired and liabilities assumed
       
Accounts receivable
    5,928  
Identifiable intangible assets
    5,817  
Other assets
    247  
Contingent consideration
    2,307  
Accounts payable
    (2,673 )
Other current liabilities
    (402 )
Total identifiable net assets
    8,917  
Goodwill
    15,880  
Total net assets recorded
    24,797  
At March 31, 2009, the Company recorded a contingent consideration accrual representing the fair value, weighted-average probability of future consideration expected to be paid in connection with the acquisition of substantially all of the assets of ACT

12


Table of Contents

of $2,307. The contingent consideration arrangement requires the Company to pay ACT a pro rata amount of up to $4,000 annually for the achievement of a minimum annual gross margin dollar level (the Hurdle) of $10,000, $11,000 and $12,000 in fiscal 2009, 2010 and 2011, respectively. In addition, the Company is required to pay ACT thirty-five percent (35%) of all qualifying gross margin dollars above the annual Hurdle rate for each of the three years. The potential undiscounted amount of all future payments that the Company could be required to make under the contingent consideration arrangement is between $0 and $4,000 in any one year, and $0 and $12,000 in total, not including the amount related to the thirty-five percent (35%) sharing of qualifying gross margin dollars above the pre-determined Hurdle. The fair value of the contingent consideration arrangement of $2,307 was calculated using a probability of payout for each of the three years and included only twenty-five percent (25%) of the weighted-average, probable three-year aggregate payout as up to seventy-five percent (75%) of the contingent consideration is subject to forfeiture.
Note O: Goodwill
Goodwill is allocated to each of Fuel Tech’s reporting units after considering the nature of the net assets giving rise to the goodwill and how each reporting unit would enjoy the benefits and synergies of the net assets acquired. Fuel Tech has two reporting units which are reported in the FUEL CHEM segment and the APC technology segment. As of June 30, 2010 and December 31, 2009, goodwill allocated to the FUEL CHEM technology segment was $1,723 and $1,723, respectively, while goodwill allocated to the APC Technology segment was $19,328 and $19,328, respectively.

13


Table of Contents

FUEL TECH, INC.
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
Results of Operations
Revenues for the three months ended June 30, 2010 and 2009 were $18,902 and $18,922, respectively, while revenues for the six months ended June 30, 2010 and 2009 were $36,519 and $36,239, respectively. While revenues for the quarter and year-to-date remain flat, total revenues reflect an increase in FUEL CHEM technology segment revenues partially offset by lower APC technology segment revenues.
The Air Pollution Control (APC) technology segment generated revenues of $9,291 and $17,505 for the three- and six-month periods ended June 30, 2010, respectively, an increase of $114, or 1%, and a decrease of $492, or 3%, from the respective prior year periods due to timing of completion on existing capital project orders for pollution control equipment. While revenues are down from the prior year, this segment remains uniquely positioned to capitalize on the next phase of increasingly stringent U.S. air quality standards, specifically on NOx control. Interest in Fuel Tech’s suite of pollution control technologies, on both a new and retrofit basis, remains strong, both domestically and abroad.
Consolidated APC backlog at June 30, 2010 was $20,734 versus backlog at June 30, 2009 of approximately $13,632. Substantially all of the backlog as of June 30, 2010 should be recognized as revenue in fiscal 2010, although the timing of such revenue recognition in 2010 is subject to the timing of the expenses incurred on existing projects.
The FUEL CHEM technology segment generated revenues of $9,611 and $19,014 for the three- and six-month periods ended June 30, 2010, respectively, a decrease of $134, or 1%, and an increase $772, or 4%, versus the respective prior year periods. This year-to-date increase is primarily due to revenue from a new commercial customer with a one-time risk share payment relating to a successful demonstration performed in the prior year. Despite a flat year in 2009, both in terms of revenues generated and new FUEL CHEM customer units added, the marketplace acceptance for Fuel Tech’s patented TIFI™ Targeted In-Furnace Injection™ technology remains strong, which represent the largest market opportunity for the technology.
Cost of sales as a percentage of revenue for the three months ended June 30, 2010 and 2009 was 59% and 55%, respectively. The cost of sales percentage for the APC technology segment increased to 65% from 51% in the comparable prior-year period, primarily due to the mix of lower margin products within the technology segment. For the FUEL CHEM technology segment, the cost of sales percentage decreased to 52% from 58% for the comparable prior-year quarter. This decrease was primarily due to international demonstration costs that were incurred in the second quarter of 2009.
Cost of sales as a percentage of revenue for the six months ended June 30, 2010 and 2009 was 56% and 60%, respectively. The cost of sales percentage for the APC technology segment increased from 61% to 65%. For the FUEL CHEM technology segment, the cost of sales percentage decreased to 49% from 59% for the comparable six-month quarter. This decrease was primarily due to recognition of a one time risk share payment for a substantial demonstration program recognized in the first quarter of 2010 from a demonstration program completed in 2009.
Selling, general and administrative expenses (SG&A) for the quarters ended June 30, 2010 and 2009 were $8,018 and $8,876, respectively. Of the $858 decrease in SG&A for the quarter versus the prior year, $603 is related to stock compensation expense, while $360 is related to the reallocation of resources within the company. Of the $1,632 increase in SG&A expenses for the six-month period ended June 30, 2009, $1,655 is relates to the aforementioned reasons.
Research and development (R&D) expenses for the three months ended June 30, 2010 and 2009 were $165 and $77, respectively, while R&D expenditures for the six months ended June 30, 2010 and 2009 were $311 and $231, respectively. The Company’s increased expenses are due to an increased effort in expanding it’s offerings on the FUEL CHEM technology segment
Interest expense for the three- and six-month periods ended June 30, 2010 of $33 and $77, respectively, is due to borrowings for the Beijing Fuel Tech Facility. A portion of the borrowings was repaid during the second quarter of 2010.
The income tax benefit for the three- and six-month periods ended June 30, 2010 and 2009 were $237 and $188 and $95 and $1,229, respectively, reflecting the Company’s pre-tax loss position, respectively.

14


Table of Contents

Liquidity and Sources of Capital
At June 30, 2010, Fuel Tech had cash and cash equivalents, short-term investments and restricted cash on hand of $21,066 and working capital of $33,366 versus $20,965 and $30,578 at December 31, 2009, respectively.
Operating activities provided $1,327of cash during the six-month period ended June 30, 2010, primarily due to the add back of non-cash items including stock compensation expense of $2,519, depreciation expense of $1,626, amortization expense of $443, and an increase in other noncurrent liabilities of $2,097. Partially offsetting these items was a decrease in income tax provision of $887 and $4,434 in accounts receivable.
Investing activities used cash of $442 during the six months ended June 30, 2010, the majority of which was used for capital expenditures, primarily to support and enhance the operations of the FUEL CHEM technology segment.
On June 30, 2009, Fuel Tech entered into a $25,000 revolving credit facility (the Facility) with JPMorgan Chase Bank, N.A (JPM Chase). The Facility has a term of two years through June 30, 2011, is unsecured, bears interest at a rate of LIBOR plus a spread range of 250 basis points to 375 basis points, as determined under a formula related to the Company’s leverage ratio, and has the Company’s Italian subsidiary, Fuel Tech S.r.l., as a guarantor. Fuel Tech can use this Facility for cash advances and standby letters of credit. As of June 30, 2010, there were no outstanding borrowings on this Facility.
At its inception, the Facility contained several debt covenants with which the Company must comply on a quarterly or annual basis, including: an annual capital expenditure limit of $10,000 and a minimum net income for the quarterly period ended September 31, 2009 of $750. For subsequent periods, the Facility covenants included an annual capital expenditure limited of $10,000, a maximum funded debt to EBITDA ratio of 2.75:1.0 for the quarterly period ended June 30, 2010 and a maximum funded debt to EBITDA ratio of 1.5:1.0 for all succeeding quarterly periods until the facility expires. Maximum funded debt is defined as all borrowed funds, outstanding standby letters of credit and bank guarantees. EBITDA includes after tax earnings with add backs for interest expense, income taxes, and depreciation and amortization expenses. In addition, the Company must maintain a minimum tangible net worth of $42,000, adjusted upward for 50% of net income generated and 100% of all capital issuances.
As of June 30, 2010, the Company was in compliance with all debt covenants of the Facility, including a year-to-date capital expenditure amount of $642 and a tangible net worth amount of $53,174 which was above the required amount of $50,262 by $2,912.
Beijing Fuel Tech Environmental Technologies Company, Ltd. (Beijing Fuel Tech), a wholly-owned subsidiary of Fuel Tech, has a revolving credit facility (the China Facility) agreement with JPM Chase for RMB 45 million (approximately $6,600), which expires on June 30, 2011. The facility is unsecured, bears interest at a rate of 120% of the People’s Bank of China (PBOC) Base Rate and does not contain any material debt covenants. Beijing Fuel Tech can use this facility for cash advances and bank guarantees. As of June 30, 2010, Beijing Fuel Tech has borrowings outstanding in the amount $2,203, which bears interest at 5.8% .
At June 30, 2010, the Company had outstanding standby letters of credit and bank guarantees, predominantly to customers, totaling approximately $1,299 in connection with contracts in process. Fuel Tech is committed to reimbursing the issuing bank for any payments made by the bank under these instruments. At June 30, 2010, there were no cash borrowings under the revolving credit facility and approximately $23,701 was available.
In the event of default on either the Facility or the China Facility, the cross default feature in each allows the lending bank to accelerate the payment of any amounts outstanding and may, under certain circumstances, allow the bank to cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy the payment due, may require the Company to obtain alternate financing to satisfy the accelerated payment.
The Company utilized cash from financing activities during the three months ended June 30, 2010 of $667, primarily from the repayment of a portion of the debt outstanding for the China facility. Offsetting this amount was $50 from non cash stock based compensation from the issuance of directors’ deferred shares of stock.

15


Table of Contents

In the opinion of management, Fuel Tech’s expected near-term revenue growth will be driven by the timing of penetration of the coal-fired utility marketplace via utilization of its TIFI technology, by utility and industrial entities’ adherence to the NOx reduction requirements of the various domestic environmental regulations, and by the expansion of both business segments in non-U.S. geographies. Fuel Tech expects its liquidity requirements to be met by the operating results generated from these activities.
Contingencies and Contractual Obligations
Fuel Tech issues a standard product warranty with the sale of its products to customers as discussed in Note K. The change in the warranty liability balance during the three months ended June 30, 2010 was not material.

16


Table of Contents

Forward-Looking Statements
This Quarterly Report on Form 10-Q contains “forward-looking statements,” as defined in Section 21E of the Securities Exchange Act of 1934, as amended, which are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 and reflect Fuel Tech’s current expectations regarding future growth, results of operations, cash flows, performance and business prospects, and opportunities, as well as assumptions made by, and information currently available to, our management. Fuel Tech has tried to identify forward-looking statements by using words such as “anticipate,” “believe,” “plan,” “expect,” “estimate,” “intend,” “will,” and similar expressions, but these words are not the exclusive means of identifying forward-looking statements. These statements are based on information currently available to Fuel Tech and are subject to various risks, uncertainties, and other factors, including, but not limited to, those discussed in Fuel Tech’s Annual Report on Form 10-K for the year ended December 31, 2009 in Item 1A under the caption “Risk Factors,” which could cause Fuel Tech’s actual growth, results of operations, financial condition, cash flows, performance and business prospects and opportunities to differ materially from those expressed in, or implied by, these statements. Fuel Tech undertakes no obligation to update such factors or to publicly announce the results of any of the forward-looking statements contained herein to reflect future events, developments, or changed circumstances or for any other reason. Investors are cautioned that all forward-looking statements involve risks and uncertainties, including those detailed in Fuel Tech’s filings with the Securities and Exchange Commission.
Item 3. Quantitative and Qualitative Disclosures about Market Risk
Foreign Currency Risk Management
Fuel Tech’s earnings and cash flow are subject to fluctuations due to changes in foreign currency exchange rates. We do not enter into foreign currency forward contracts nor into foreign currency option contracts to manage this risk due to the immaterial nature of the transactions involved.
Fuel Tech is also exposed to changes in interest rates primarily due to its long-term debt arrangement (refer to Note I to the consolidated financial statements). A hypothetical 100 basis point adverse move in interest rates along the entire interest rate yield curve would not have a materially adverse effect on interest expense during the upcoming year ended December 31, 2010.
Item 4. Controls and Procedures
Fuel Tech maintains disclosure controls and procedures and internal controls designed to ensure (a) that information required to be disclosed in Fuel Tech’s filings under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and (b) that such information is accumulated and communicated to management, including the principal executive and financial officer, as appropriate to allow timely decisions regarding required disclosure.
There has been no change in the Company’s internal control over financial reporting during the quarter covered by this report that has materially affected, or is reasonably likely to materially affect, its internal control over financial reporting.

17


Table of Contents

PART II. OTHER INFORMATION
Item 1. Legal Proceedings
     None
Item 1A. Risk Factors
    The risk factors included in our Annual Report on Form 10-K for fiscal year ended December 31, 2009 have not materially changed.
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds
     None
Item 6. Exhibits
  a.   Exhibits (all filed herewith)
  10.1   Employment Agreement, dated August 2, 2010, between Fuel Tech, Inc, and David S. Collins
 
  31.1   Certification of CEO pursuant to Section 302 of Sarbanes-Oxley Act of 2002
 
  31.2   Certification of CFO pursuant to Section 302 of Sarbanes-Oxley Act of 2002
 
  32   Certification of CEO and CFO pursuant to Section 906 of Sarbanes-Oxley Act of 2002

18


Table of Contents

FUEL TECH, INC.
Signatures
Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
         
     
Date: August 9, 2010  By:   /s/ Douglas G. Bailey    
    Douglas G. Bailey   
    President and Chief Executive Officer
(Principal Executive Officer) 
 
 
     
Date: August 9, 2010  By:   /s/ David S. Collins    
    David S. Collins   
    Senior Vice President and Chief Financial Officer
(Principal Financial Officer) 
 
 

19