FTEK-2013.06.30-10Q
Table of Contents

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 FORM 10-Q 
(Mark One)
x
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended June 30, 2013
or 
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from              to             
Commission file number: 001-33059
 ________________________________
FUEL TECH, INC.
(Exact name of registrant as specified in its charter)
  ________________________________
Delaware
 
20-5657551
(State or other jurisdiction of
incorporation of organization)
 
(I.R.S. Employer
Identification Number)
Fuel Tech, Inc.
27601 Bella Vista Parkway
Warrenville, IL 60555-1617
630-845-4500
www.ftek.com
(Address and telephone number of principal executive offices)
  ________________________________
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definition of “accelerated filer”, “large accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one): 
Large accelerated filer
 
¨
Accelerated filer
 
x
 
 
 
 
Non-accelerated filer
 
¨
Smaller reporting company
 
¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x
On August 7, 2013 there were outstanding 22,374,873 shares of Common Stock, par value $0.01 per share, of the registrant.
 



Table of Contents

FUEL TECH, INC.
Form 10-Q for the three-month period ended June 30, 2013
INDEX
 
 
 
Page
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


Table of Contents

PART I.        FINANCIAL INFORMATION

Item 1.        Financial Statements

FUEL TECH, INC.
CONSOLIDATED BALANCE SHEETS
(Unaudited)
(in thousands, except share and per share data)
 
 
 
June 30,
2013
 
December 31,
2012
 
 
 
 
 
Assets
 
 
 
 
Current assets:
 
 
 
 
Cash and cash equivalents
 
$
23,113

 
$
24,453

Marketable securities
 
24

 
44

Accounts receivable, net of allowance for doubtful accounts of $610 and $460, respectively
 
41,418

 
30,169

Inventories
 
719

 
513

Prepaid expenses and other current assets
 
1,716

 
3,956

Prepaid income taxes
 
1,182

 
156

Deferred income taxes
 
635

 
573

Total current assets
 
68,807

 
59,864

Property and equipment, net of accumulated depreciation of $18,978 and $19,421, respectively
 
13,811

 
13,749

Goodwill
 
21,051

 
21,051

Other intangible assets, net of accumulated amortization of $4,692 and $4,270, respectively
 
4,574

 
4,838

Deferred income taxes
 
2,457

 
3,688

Other assets
 
2,372

 
2,707

Total assets
 
$
113,072

 
$
105,897

Liabilities and Shareholders’ Equity
 
 
 
 
Current liabilities:
 
 
 
 
Short-term debt
 
807

 

Accounts payable
 
13,026

 
12,828

Accrued liabilities:
 
 
 
 
Employee compensation
 
3,184

 
3,175

Other accrued liabilities
 
9,881

 
4,943

Total current liabilities
 
26,898

 
20,946

Other liabilities
 
701

 
715

Total liabilities
 
27,599

 
21,661

Shareholders’ equity:
 
 
 
 
Common stock, $.01 par value, 40,000,000 shares authorized, 22,472,238 and 22,111,675 shares issued, and 22,374,873 and 22,102,549 outstanding
 
225

 
221

Additional paid-in capital
 
133,602

 
133,498

Accumulated deficit
 
(47,913
)
 
(49,128
)
Accumulated other comprehensive loss
 
(127
)
 
(392
)
Nil coupon perpetual loan notes
 
76

 
76

Treasury stock, 97,365 and 9,126 shares in 2013 and 2012, respectively, at cost
 
(390
)
 
(39
)
Total shareholders’ equity
 
85,473

 
84,236

Total liabilities and shareholders’ equity
 
$
113,072

 
$
105,897

See notes to consolidated financial statements.

1

Table of Contents

FUEL TECH, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
(Unaudited)
(in thousands, except share and per-share data)
 
 
 
Three Months Ended 
 June 30,
 
Six Months Ended 
 June 30,
 
 
2013
 
2012
 
2013
 
2012
Revenues
 
$
29,092

 
$
20,911

 
$
51,576

 
$
46,123

Costs and expenses:
 
 
 
 
 
 
 
 
Cost of sales
 
17,227

 
11,880

 
30,279

 
25,100

Selling, general and administrative
 
9,307

 
7,874

 
17,765

 
16,868

Research and development
 
430

 
969

 
1,363

 
1,475

 
 
26,964

 
20,723

 
49,407

 
43,443

Operating income
 
2,128

 
188

 
2,169

 
2,680

Interest expense
 
(10
)
 
(49
)
 
(10
)
 
(74
)
Interest income
 
14

 
40

 
29

 
40

Other expense
 
(129
)
 
(72
)
 
(209
)
 
(51
)
Income before income taxes
 
2,003

 
107

 
1,979

 
2,595

Income tax expense
 
(767
)
 
(39
)
 
(764
)
 
(984
)
Net income
 
$
1,236

 
$
68

 
$
1,215

 
$
1,611

Net income per common share:
 
 
 
 
 
 
 
 
Basic
 
$
0.06

 
$
0.00

 
$
0.05

 
$
0.07

Diluted
 
$
0.05

 
$
0.00

 
$
0.05

 
$
0.07

Weighted-average number of common shares outstanding:
 
 
 
 
 
 
 
 
Basic
 
22,197,000

 
23,107,000

 
22,155,000

 
23,349,000

Diluted
 
23,295,000

 
23,984,000

 
23,133,000

 
24,122,000

See notes to consolidated financial statements.

2

Table of Contents

FUEL TECH, INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(Unaudited)
(in thousands)
 
 
 
Three Months Ended 
 June 30,
 
Six Months Ended 
 June 30,
 
 
2013
 
2012
 
2013
 
2012
Net income
 
$
1,236

 
$
68

 
$
1,215

 
$
1,611

Other comprehensive income:
 
 
 
 
 
 
 
 
Foreign currency translation adjustments
 
540

 
70

 
277

 
104

Unrealized losses from marketable securities, net of tax
 
(12
)
 
(26
)
 
(12
)
 
(11
)
Total other comprehensive income
 
528

 
44

 
265

 
93

Comprehensive income
 
$
1,764

 
$
112

 
$
1,480

 
$
1,704

See notes to consolidated financial statements.

3

Table of Contents

FUEL TECH, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
(Unaudited)
(in thousands)
 
 
 
Six Months Ended 
 June 30,
 
 
2013
 
2012
Operating Activities
 
 
 
 
Net income
 
$
1,215

 
$
1,611

Adjustments to reconcile net income to net cash (used in) provided by operating activities:
 
 
 
 
Depreciation
 
1,105

 
1,091

Amortization
 
422

 
451

Bad debt expense (recovery)
 
152

 
(6
)
Deferred income taxes
 
613

 
(89
)
Stock based compensation
 
665

 
372

Changes in operating assets and liabilities:
 
 
 
 
Accounts receivable
 
(11,084
)
 
8,606

Inventories
 
(202
)
 
(80
)
Prepaid expenses, other current assets and other noncurrent assets
 
2,584

 
869

Accounts payable
 
221

 
(4,017
)
Accrued liabilities and other noncurrent liabilities
 
3,817

 
(3,508
)
Net cash (used in) provided by operating activities
 
(492
)
 
5,300

Investing Activities
 
 
 
 
Purchases of property, equipment and patents
 
(1,326
)
 
(1,726
)
Net cash (used in) investing activities
 
(1,326
)
 
(1,726
)
Financing Activities
 
 
 
 
Payments to repurchase common stock
 

 
(7,179
)
Proceeds from short-term borrowings
 
799

 

Acquisition of treasury stock
 
(351
)
 

Net cash provided by (used in) financing activities
 
448

 
(7,179
)
Effect of exchange rate fluctuations on cash
 
30

 
101

Net decrease in cash and cash equivalents
 
(1,340
)
 
(3,504
)
Cash and cash equivalents at beginning of period
 
24,453

 
28,229

Cash and cash equivalents at end of period
 
$
23,113

 
$
24,725

See notes to consolidated financial statements.

4

Table of Contents

FUEL TECH, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
June 30, 2013
(Unaudited)
(in thousands, except share and per-share data)
 
Note A:        Nature of Business
Fuel Tech, Inc. (Fuel Tech or the Company or “we”, “us”, or “our”) is a fully integrated company that uses a suite of advanced technologies to provide boiler optimization, efficiency improvement and air pollution reduction and control solutions to utility and industrial customers worldwide. Originally incorporated in 1987 under the laws of the Netherlands Antilles as Fuel-Tech N.V., Fuel Tech became domesticated in the United States on September 30, 2006, and continues as a Delaware corporation with its corporate headquarters at 27601 Bella Vista Parkway, Warrenville, Illinois, 60555-1617. Fuel Tech maintains an Internet website at www.ftek.com. Fuel Tech’s Annual Report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934 as amended (Exchange Act), are made available through our website as soon as reasonably practical after electronically filed or furnished to the Securities and Exchange Commission. Also available on Fuel Tech’s website are the Company’s Corporate Governance Guidelines and Code of Ethics and Business Conduct, as well as the charters of the Audit, Compensation, and Nominating and Corporate Governance committees of the Board of Directors. All of these documents are available in print without charge to stockholders who request them. Information on our website is not incorporated into this report.
Fuel Tech’s special focus is the worldwide marketing of its nitrogen oxide (NOx) reduction and FUEL CHEM® processes. The Air Pollution Control (APC) technology segment reduces NOx emissions in flue gas from boilers, incinerators, furnaces and other stationary combustion sources by utilizing combustion optimization techniques and Low NOx and Ultra Low NOx Burners; Over-Fire Air systems, NOxOUT® and HERT™ High Energy Reagent Technology™ SNCR systems; systems that incorporate ASCR™ (Advanced Selective Catalytic Reduction) technologies including NOxOUT-CASCADE®, ULTRA™ and NOxOUT-SCR® processes, Ammonia Injection Grid (AIG) and Graduated Straightening Grid (GSG™). The FUEL CHEM® technology segment improves the efficiency, reliability and environmental status of combustion units by controlling slagging, fouling and corrosion, as well as the formation of sulfur trioxide, ammonium bisulfate, particulate matter (PM2.5), carbon dioxide, NOx and unburned carbon in fly ash through the addition of chemicals into the fuel or via TIFI® Targeted In-Furnace Injection™ programs. Fuel Tech has other technologies, both commercially available and in the development stage, all of which are related to APC and FUEL CHEM technology segments or are similar in their technological base. We have expended significant resources in the research and development of new technologies in building our proprietary portfolio of air pollution control, fuel and boiler treatment chemicals, computer modeling and advanced visualization technologies. Fuel Tech’s business is materially dependent on the continued existence and enforcement of worldwide air quality regulations.
 
Note B:        Basis of Presentation
The accompanying unaudited consolidated financial statements have been prepared in accordance with generally accepted accounting principles for interim financial information and with the instructions to Form 10-Q and Article 10 of Regulation S-X of the Exchange Act. Accordingly, they do not include all of the information and footnotes required by accounting principles generally accepted in the United States for complete financial statements. In the opinion of management, all adjustments (consisting of normal recurring accruals) considered necessary for a fair presentation of the balance sheet and results of operations for the periods covered have been included and all significant intercompany transactions and balances have been eliminated.
The balance sheet at December 31, 2012 has been derived from the audited financial statements at that date, but does not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements.
For further information, refer to the consolidated financial statements and footnotes thereto included in Fuel Tech’s Annual Report on Form 10-K for the year ended December 31, 2012 as filed with the Securities and Exchange Commission.
 
Note C:        Revenue Recognition Policy
Revenues from the sales of chemical products are recorded when title transfers, either at the point of shipment or at the point of destination, depending on the contract with the customer.
Fuel Tech uses the percentage of completion method of accounting for equipment construction and license contracts that are sold within the Air Pollution Control technology segment. Under the percentage of completion method, revenues are recognized as work is performed based on the relationship between actual construction costs incurred and total estimated costs at completion. Construction costs include all direct costs such as materials, labor, and subcontracting costs, and indirect costs allocable to the particular contract such as indirect labor, tools and equipment, and supplies. Revisions in completion estimates and contract values are made in the period in which the facts giving rise to the revisions become known and can influence the timing of when revenues are recognized under the percentage of completion method of accounting. Such revisions have historically not had a material effect on the amount of revenue recognized. The completed contract method is used for certain contracts when reasonably dependable

5

Table of Contents

estimates of the percentage of completion cannot be made. When the completed contract method is used, revenue and costs are deferred until the contract is substantially complete, which usually occurs upon customer acceptance of the installed product. Provisions are made for estimated losses on uncompleted contracts in the period in which such losses are determined. As of June 30, 2013, and December 31, 2012, the Company had two contracts in progress that were identified as a loss contracts and a provision for loss in the amounts of $4 and $57, respectively, were recorded in other accrued liabilities on the consolidated balance sheet.
Fuel Tech’s APC contracts are typically eight to sixteen months in length. A typical contract will have three or four critical operational measurements that, when achieved, serve as the basis for us to invoice the customer via progress billings. At a minimum, these measurements will include the generation of engineering drawings, the shipment of equipment and the completion of a system performance test.
As part of most of its contractual APC project agreements, Fuel Tech will agree to customer-specific acceptance criteria that relate to the operational performance of the system that is being sold. These criteria are determined based on mathematical modeling that is performed by Fuel Tech personnel, which is based on operational inputs that are provided by the customer. The customer will warrant that these operational inputs are accurate as they are specified in the binding contractual agreement. Further, the customer is solely responsible for the accuracy of the operating condition information; typically all performance guarantees and equipment warranties granted by us are voidable if the operating condition information is inaccurate or is not met.
Accounts receivable includes unbilled receivables, representing revenues recognized in excess of billings on uncompleted contracts under the percentage of completion method of accounting. At June 30, 2013 and December 31, 2012, unbilled receivables were approximately $18,142 and $15,661, respectively, and are included in accounts receivable on the consolidated balance sheets. Billings in excess of costs and estimated earnings on uncompleted contracts were $3,804 and $1,703, at June 30, 2013 and December 31, 2012, respectively. Such amounts are included in other accrued liabilities on the consolidated balance sheets.
Fuel Tech has installed over 700 units with APC technology and normally provides performance guarantees to our customers based on the operating conditions for the project. As part of the project implementation process, we perform system start-up and optimization services that effectively serve as a test of actual project performance. We believe that this test, combined with the accuracy of the modeling that is performed, enables revenue to be recognized prior to the receipt of formal customer acceptance.
 
Note D:        Cost of Sales
Cost of sales includes all internal and external engineering costs, equipment and chemical charges, inbound and outbound freight expenses, internal and site transfer costs, installation charges, purchasing and receiving costs, inspection costs, warehousing costs, project personnel travel expenses and other direct and indirect expenses specifically identified as project- or product line-related, as appropriate (e.g., test equipment depreciation and certain insurance expenses). Certain depreciation and amortization expenses related to tangible and intangible assets, respectively, are also allocated to cost of sales.
 
Note E:        Selling, General and Administrative Expenses
Selling, general and administrative expenses primarily include the following categories except where an allocation to the cost of sales line item is warranted due to the project- or product-line nature of a portion of the expense category: salaries and wages, employee benefits, non-project travel, insurance, legal, rent, accounting and auditing, recruiting, telephony, employee training, Board of Directors’ fees, auto rental, office supplies, dues and subscriptions, utilities, real estate taxes, commissions and bonuses, marketing materials, postage and business taxes. Departments comprising the selling, general and administrative line item primarily include the functions of executive management, finance and accounting, investor relations, regulatory affairs, marketing, business development, information technology, human resources, sales, legal and general administration.

Note F:        Available-for-Sale Marketable Securities
At the time of purchase, marketable securities are classified as available-for-sale as management has the intent and ability to hold such securities for an indefinite period of time, but not necessarily to maturity. Any decision to sell available-for-sale securities would be based on various factors, including, but not limited to asset/liability management strategies, changes in interest rates or prepayment risks, and liquidity needs. Available-for-sale securities are carried at fair value with unrealized gains and losses, net of related deferred income taxes, recorded in equity as a separate component of other comprehensive income (OCI). Our marketable securities consist of a single equity investment with a fair value of $24 and $44 and no cost basis at June 30, 2013 and December 31, 2012.
Purchases and sales of securities are recognized on a trade date basis. Realized securities gains or losses are reported in other income/(expense) in the Consolidated Statements of Operations. The cost of securities sold is based on the specific identification method. On a quarterly basis, we make an assessment to determine if there have been any events or circumstances to indicate whether a security with an unrealized loss is impaired on an other-than-temporary (OTTI) basis. This determination requires significant judgment. OTTI is considered to have occurred (1) if management intends to sell the security; (2) if it is more likely than not we will be required to sell the security before recovery of its amortized cost basis; or (3)the present value of the expected cash flows is not sufficient to recover the entire amortized cost basis. The credit-related OTTI, represented by the expected loss in principal, is recognized in non-interest income, while noncredit-related OTTI is recognized in OCI. For securities which we do

6

Table of Contents

expect to sell, all OTTI is recognized in earnings. Presentation of OTTI is made in the income statement on a gross basis with a reduction for the amount of OTTI recognized in OCI. Once an other-than-temporary impairment is recorded, when future cash flows can be reasonably estimated, future cash flows are re-allocated between interest and principal cash flows to provide for a level-yield on the security. We have not experienced any other-than-temporary impairments during the periods ended June 30, 2013 and 2012.
 
Note G:        Accumulated Other Comprehensive (Loss) Income
The changes in accumulated other comprehensive (loss) income by component were as follows:
 
 
 
Three Months Ended
 
Six Months Ended
 
 
June 30,
 
June 30,
 
 
2013
2012
 
2013
2012
Foreign currency translation
 
 
 
 
 
 
Balance at beginning of period
 
$
(682
)
$
379

 
$
(419
)
$
345

Other comprehensive income (loss):
 
 
 
 
 
 
Foreign currency translation adjustments (1)
 
540

70

 
277

104

Balance at end of period
 
$
(142
)
$
449

 
$
(142
)
$
449

Available-for-sale marketable securities
 
 
 
 
 
 
Balance at beginning of period
 
$
27

$
51

 
$
27

$
36

Other comprehensive income:
 
 
 
 
 
 
Net unrealized holding gain (2)
 
(20
)
(41
)
 
(20
)
(17
)
Deferred income taxes (2)
 
8

15

 
8

6

Total other comprehensive income
 
(12
)
(26
)
 
(12
)
(11
)
Balance at end of period
 
$
15

$
25

 
$
15

$
25

Total accumulated other comprehensive (loss) income
 
$
(127
)
$
474

 
$
(127
)
$
474

 
(1)
In all periods presented, there were no tax impacts related to rate changes and no amounts were reclassified to earnings.
(2)
In all periods presented, there were no realized holding gains or losses and therefore no amounts were reclassified to earnings.

Note H:        Treasury Stock
Common stock held in treasury totaled 97,365 and 9,126 with a cost of $390 and $39 at June 30, 2013 and December 31, 2012, respectively. These shares were withheld from employees to settle personal tax withholding obligations that arose as a result of restricted stock units that vested during the first and second quarter of 2013 and fourth quarter of 2012.

Note I:        Earnings per Share Data
Basic earnings per share excludes the dilutive effects of stock options, restricted stock units (RSUs), and the nil coupon non-redeemable convertible unsecured loan notes. Diluted earnings per share includes the dilutive effect of stock options, restricted stock units, and of the nil coupon non-redeemable convertible unsecured loan notes. The following table sets forth the weighted-average shares used in calculating the earnings per share for the three-month periods ended June 30, 2013 and 2012.
 
 
 
Three Months Ended 
 June 30,
 
Six Months Ended 
 June 30,
 
 
2013
 
2012
 
2013
 
2012
Basic weighted-average shares
 
22,197,000

 
23,107,000

 
22,155,000

 
23,349,000

Conversion of unsecured loan notes
 
7,000

 
7,000

 
7,000

 
7,000

Unvested options and RSUs
 
1,091,000

 
870,000

 
971,000

 
766,000

Diluted weighted-average shares
 
23,295,000

 
23,984,000

 
23,133,000

 
24,122,000

 
Fuel Tech had 1,658,000 and 1,547,000 weighted average stock awards outstanding at June 30, 2013 and 2012, respectively, that were not dilutive for the purposes of inclusion in the calculation of diluted earnings per share but could potentially become dilutive in future periods.

Note J:        Stock-Based Compensation

7

Table of Contents

Fuel Tech has a stock-based employee compensation plan, referred to as the Fuel Tech, Inc. Incentive Plan (Incentive Plan), under which awards may be granted to participants in the form of non-qualified stock options, incentive stock options, stock appreciation rights, restricted stock, restricted stock units (RSUs), performance awards, bonuses or other forms of share-based or non-share-based awards or combinations thereof. Participants in the Incentive Plan may be Fuel Tech’s directors, officers, employees, consultants or advisors (except consultants or advisors in capital-raising transactions) as the directors determine are key to the success of Fuel Tech’s business. The amount of shares that may be issued or reserved for awards to participants under a 2004 amendment to the Incentive Plan is 12.5% of outstanding shares calculated on a diluted basis. At June 30, 2013, Fuel Tech had approximately 392,000 equity awards available for issuance under the Incentive Plan.
Stock-based compensation is included in selling, general, and administrative costs in our Consolidated Statements of Operations. The components of stock-based compensation for the three- and six- month periods ended June 30, 2013 and 2012 were as follows:
 
 
 
Three Months Ended 
 June 30,
 
Six Months Ended 
 June 30,
 
 
2013
2012
 
2013
2012
Stock options and restricted stock units
 
$
336

$
147

 
$
665

$
341

Deferred directors fees
 

15

 

31

Total stock-based compensation expense
 
336

162

 
665

372

Tax benefit of stock-based compensation expense
 
(122
)
(57
)
 
(242
)
(129
)
After-tax effect of stock-based compensation
 
$
214

$
105

 
$
423

$
243

As of June 30, 2013, there was $3,528 of total unrecognized compensation cost related to all non-vested share-based compensation arrangements granted under the Incentive Plan.
Stock Options
Stock options granted to employees under the Incentive Plan have a 10-year life and they vest as follows: 50% after the second anniversary of the award date, 25% after the third anniversary, and the final 25% after the fourth anniversary of the award date. Fuel Tech calculates stock compensation expense for employee option awards based on the grant date fair value of the award, less expected annual forfeitures, and recognizes expense on a straight-line basis over the four-year service period of the award. Stock options granted to members of our board of directors vest immediately. Stock compensation for these awards is based on the grant date fair value of the award and is recognized in expense immediately.
Fuel Tech uses the Black-Scholes option pricing model to estimate the grant date fair value of employee stock options. The principal variable assumptions utilized in valuing options and the methodology for estimating such model inputs include: (1) risk-free interest rate – an estimate based on the yield of zero–coupon treasury securities with a maturity equal to the expected life of the option; (2) expected volatility – an estimate based on the historical volatility of Fuel Tech’s Common Stock for a period equal to the expected life of the option; and (3) expected life of the option – an estimate based on historical experience including the effect of employee terminations.
Based on the results of the model, the weighted-average fair value of the stock options granted during the six-month period ended June 30, 2013 was $1.79 per option using the following assumptions:
            
Expected dividend yield
0.0%
Risk-free interest rate
1.01%
Expected volatility
55.2%
Expected life of option
4.7 years

8

Table of Contents

Stock option activity for Fuel Tech’s Incentive Plan for the six months ended June 30, 2013 was as follows:
 
 
 
Number
of
Options
 
Weighted-
Average
Exercise Price
 
Weighted-
Average
Remaining
Contractual
Term
 
Aggregate
Intrinsic
Value
Outstanding on January 1, 2013
 
1,914,000

 
$
11.38

 
 
 
 
Granted
 
80,000

 
3.85

 
 
 
 
Exercised
 

 

 
 
 
 
Expired or forfeited
 
(67,000
)
 
6.05

 
 
 
 
Outstanding on June 30, 2013
 
1,927,000

 
$
11.25

 
4.0 years
 
$
17

Exercisable on June 30, 2013
 
1,897,000

 
$
11.31

 
4.0 years
 
$
17

Non-vested stock option activity for the six months ended June 30, 2013 was as follows:
 
 
 
Non-Vested Stock
Options
Outstanding
 
Weighted-Average
Grant Date
Fair Value
Outstanding on January 1, 2013
 
80,500

 
$
5.35

Granted
 
80,000

 
1.79

Vested
 
(128,000
)
 
3.34

Forfeited
 
(2,500
)
 
5.98

Outstanding on June 30, 2013
 
30,000

 
$
4.36

As of June 30, 2013, there was $45 of total unrecognized compensation cost related to non-vested stock options granted under the Incentive Plan. That cost is expected to be recognized over a weighted average period of 1.0 year.
Restricted Stock Units
Restricted stock units (RSUs) granted to employees vest over time based on continued service (typically vesting over a period between one to three years in equal installments). Such time-vested RSUs are valued at the date of grant using the intrinsic value method. Compensation cost, adjusted for estimated forfeitures, is amortized on a straight-line basis over the requisite service period.
In addition to the time vested RSUs described above, commencing in 2011, on an annual basis the Company entered into performance-based RSU agreements (the Agreements) with each of the Company’s President/Chief Executive Officer, Treasurer/Chief Financial Officer, Executive Vice President of Marketing & Sales, and Executive Vice President of Worldwide Operations. Commencing in 2013, the Company’s Senior Vice President, General Counsel, and Secretary also entered into an agreement. The Agreements provide each participating executive the opportunity to earn three types of awards with each award type specifying a targeted number of RSUs that may be granted to each executive based on either the individual performance of the executive or the Company’s relative performance compared to a peer group, as determined by the award type. The Compensation Committee of our Board of Directors (the Committee) determines the extent to which, if any, RSUs will be granted based on the achievement of the applicable performance criteria specified in the Agreement. This determination will be made following the completion of the applicable performance period (each a Determination Date). Such performance based awards include the following:
The first type of award is based on individual performance during the respective calendar year as determined by the Committee based on performance criteria specified in the Agreement. These awards will vest over a three year period beginning on the Determination Date. We estimated the fair value of these performance-based RSU awards on the date of the Agreement using the trading price of the Company’s stock on the date of determination and our estimate of the probability that the specified performance criteria will be met. The fair value measurement and probability estimate will be re-measured each reporting date until the Determination Date, at which time the final award amount will be known. For these job performance-based awards, we amortize compensation costs over the requisite service period, adjusted for estimated forfeitures, for each separately vesting tranche of the award.
The second type of RSU award contains a targeted number of RSUs to be granted based on the Company’s revenue growth relative to a specified peer group during a period of two calendar years. These awards vest 67% on the second anniversary of the Agreement date and 33% on the third anniversary of the Agreement date. We estimated the fair value of these performance-based RSU awards on the Agreement date using the trading price of the Company’s stock on the date of determination and our estimate of the probability that the specified performance criteria will be met. For these revenue

9

Table of Contents

growth performance-based awards, we amortize compensation costs over the requisite service period, adjusted for estimated forfeitures, for each separately vesting tranche of the award.
The third type of RSU award contains a targeted number of RSUs to be granted based on the total shareholder return (TSR) of the Company’s common stock relative to a specified peer group during a period of two calendar years. These awards vest 67% on the second anniversary of the Agreement date and 33% on the third anniversary of the Agreement date. We estimated the fair value of these market-based RSU awards on the Agreement date using a Monte Carlo valuation methodology and amortize the fair value over the requisite service period for each separately vesting tranche of the award. The principal variable assumptions utilized in valuing these RSUs under this valuation methodology include the risk-free interest rate, stock volatility, and correlations between our stock price and the stock prices of a peer group of companies.
At June 30, 2013, there is $3,483 of unrecognized compensation costs related to restricted stock unit awards to be recognized over a weighted average period of 2.4 years.
A summary of restricted stock unit activity for the six-month period ended June 30, 2013 is as follows:
 
 
 
Shares
 
Weighted Average
Grant Date
Fair Value
Unvested restricted stock units at December 31, 2012
 
752,024

 
$
6.22

Granted
 
476,000

 
4.77

Forfeited
 
(45,654
)
 
7.57

Vested
 
(360,563
)
 
5.36

Unvested restricted stock units at June 30, 2013
 
821,807

 
$
5.68

Deferred Directors Fees
In addition to the Incentive Plan, Fuel Tech has a Deferred Compensation Plan for Directors (Deferred Plan). Under the terms of the Deferred Plan, Directors can elect to defer Directors’ fees for shares of Fuel Tech Common Stock that are issuable at a future date as defined in the agreement. In accordance with ASC 718, Fuel Tech accounts for these awards as equity awards. In the three-month periods ended June 30, 2013 and 2012, Fuel Tech recorded $0 and $31, respectively, of stock-based compensation expense under the Deferred Plan.
 
Note K:        Debt
On June 30, 2013, Fuel Tech amended its existing revolving credit facility (the Facility) with JPMorgan Chase Bank, N.A (JPM Chase) to extend the maturity date through June 30, 2015. The total borrowing base of the facility is $15,000 and contains a provision to increase the facility up to a total principal amount of $25,000 upon approval from JPM Chase. The Facility is unsecured, bears interest at a rate of LIBOR plus a spread range of 250 basis points to 375 basis points, as determined by a formula related to the Company’s leverage ratio, and has the Company’s Italian subsidiary, Fuel Tech S.r.l., as a guarantor. Fuel Tech can use this Facility for cash advances and standby letters of credit. As of June 30, 2013 and December 31, 2012, there were no outstanding borrowings on the credit facility.
The Facility contains several debt covenants with which the Company must comply on a quarterly or annual basis, including a maximum Funded Debt to EBITDA Ratio (or “Leverage Ratio”, as defined in the Facility) of 2.0:1.0 based on the four trailing quarterly periods. Maximum funded debt is defined as all borrowed funds, outstanding standby letters of credit and bank guarantees. EBITDA includes after tax earnings with add backs for interest expense, income taxes, depreciation and amortization, and stock-based compensation expenses. In addition, the Facility covenants include an annual capital expenditure limit of $10,000 and a minimum tangible net worth of $55,000, adjusted upward for 50% of net income generated and 100% of all capital issuances. At June 30, 2013, the Company was in compliance with all financial covenants specified by the Facility.
At June 30, 2013 and December 31, 2012, the Company had outstanding standby letters of credit and bank guarantees totaling approximately $6,952 and $7,432, respectively, on its domestic credit facility in connection with contracts in process. Fuel Tech is committed to reimbursing the issuing bank for any payments made by the bank under these instruments. At June 30, 2013 and December 31, 2012, there were no cash borrowings under the domestic revolving credit facility and approximately $8,048 and $7,568, respectively, was available for future borrowings. The Company pays a commitment fee of 0.25% per year on the unused portion of the revolving credit facility.
On June 28, 2013, Beijing Fuel Tech Environmental Technologies Company, Ltd. (Beijing Fuel Tech), a wholly-owned subsidiary of Fuel Tech, entered into a new revolving credit facility (the China Facility) agreement with JPM Chase for RMB 35 million (approximately $5,655), which expires on June 27, 2014. This new credit facility replaced the previous RMB 35 million facility that expired on June 28, 2013. The facility is unsecured, bears interest at a rate of 125% of the People’s Bank of China (PBOC) Base Rate, and is guaranteed by Fuel Tech. Beijing Fuel Tech can use this facility for cash advances and bank guarantees. As of

10

Table of Contents

June 30, 2013 and December 31, 2012, Beijing Fuel Tech has borrowings outstanding in the amount of $807 and $0, respectively. These borrowings were subject to interest rates of approximately 7.0% at June 30, 2013 and December 31, 2012, respectively.
At June 30, 2013 and December 31, 2012, the Company had outstanding standby letters of credit and bank guarantees totaling approximately $1,101 and $1,112, respectively, on its Beijing Fuel Tech revolving credit facility in connection with contracts in process. At June 30, 2013 and December 31, 2012, approximately $3,747 and $4,429 was available for future borrowings.
In the event of default on either the domestic facility or the China facility, the cross default feature in each allows the lending bank to accelerate the payments of any amounts outstanding and may, under certain circumstances, allow the bank to cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy the payment due, may require the Company to obtain alternate financing to satisfy the accelerated payment.
Interest payments in the amount of $10 and $74 were made during the six-month periods ended June 30, 2013 and 2012.
 

Note L:        Business Segment and Geographic Disclosures
Fuel Tech segregates its financial results into two reportable segments representing two broad technology segments as follows:
The Air Pollution Control technology segment includes technologies to reduce NOx emissions in flue gas from boilers, incinerators, furnaces and other stationary combustion sources. These include Low and Ultra Low NOx Burners (LNB and ULNB), Over-Fire Air (OFA) systems, NOxOUT® and HERT™ Selective Non-Catalytic Reduction (SNCR) systems, and Advanced Selective Catalytic Reduction (ASCR™) systems. The ASCR system includes ULNB, OFA, and SNCR components, along with a downsized SCR catalyst, Ammonia Injection Grid (AIG), and Graduated Straightening Grid (GSG™) systems to provide high NOx reductions at significantly lower capital and operating costs than conventional SCR systems. The NOxOUT CASCADE® and NOxOUT-SCR® processes are basic types of ASCR systems, using just SNCR and SCR catalyst components. ULTRA™ technology creates ammonia at a plant site using safe urea for use with any SCR application. Flue Gas Conditioning systems are chemical injection systems offered in markets outside the U.S. and Canada to enhance electrostatic precipitator and fabric filter performance in controlling particulate emissions.
The FUEL CHEM® technology segment, which uses chemical processes in combination with advanced Computational Fluid Dynamics (CFD) and Chemical Kinetics Modeling (CKM) boiler modeling, for the control of slagging, fouling, corrosion, opacity and other sulfur trioxide-related issues in furnaces and boilers through the addition of chemicals into the furnace using TIFI® Targeted In-Furnace Injection™ technology.
The “Other” classification includes those profit and loss items not allocated by Fuel Tech to each reportable segment. Further, there are no intersegment sales that require elimination.
Fuel Tech evaluates performance and allocates resources based on reviewing gross margin by reportable segment. The accounting policies of the reportable segments are the same as those described in the summary of significant accounting policies (Note 1 in our annual report on Form 10-K). Fuel Tech does not review assets by reportable segment, but rather, in aggregate for Fuel Tech as a whole.
Information about reporting segment net sales and gross margin are provided below:
 
Three months ended June 30, 2013
 
Air Pollution
Control Segment
 
FUEL CHEM
Segment
 
Other
 
Total
Revenues from external customers
 
$
20,239

 
$
8,853

 
$

 
$
29,092

Cost of sales
 
(13,083
)
 
(4,144
)
 

 
(17,227
)
Gross margin
 
7,156

 
4,709

 

 
11,865

Selling, general and administrative
 

 

 
(9,307
)
 
(9,307
)
Research and development
 

 

 
(430
)
 
(430
)
Operating income
 
$
7,156

 
$
4,709

 
$
(9,737
)
 
$
2,128

 

11

Table of Contents

Three months ended June 30, 2012
 
Air Pollution
Control Segment
 
FUEL CHEM
Segment
 
Other
 
Total
Revenues from external customers
 
$
12,818

 
$
8,093

 
$

 
$
20,911

Cost of sales
 
(7,951
)
 
(3,929
)
 

 
(11,880
)
Gross margin
 
4,867

 
4,164

 

 
9,031

Selling, general and administrative
 

 

 
(7,874
)
 
(7,874
)
Research and development
 

 

 
(969
)
 
(969
)
Operating income
 
$
4,867

 
$
4,164

 
$
(8,843
)
 
$
188

Six months ended June 30, 2013
 
Air Pollution
Control Segment
 
FUEL CHEM
Segment
 
Other
 
Total
Revenues from external customers
 
$
33,186

 
$
18,390

 
$

 
$
51,576

Cost of sales
 
(21,666
)
 
(8,613
)
 

 
(30,279
)
Gross margin
 
11,520

 
9,777

 

 
21,297

Selling, general and administrative
 

 

 
(17,765
)
 
(17,765
)
Research and development
 

 

 
(1,363
)
 
(1,363
)
Operating income
 
$
11,520

 
$
9,777

 
$
(19,128
)
 
$
2,169

Six months ended June 30, 2012
 
Air Pollution
Control Segment
 
FUEL CHEM
Segment
 
Other
 
Total
Revenues from external customers
 
$
28,532

 
$
17,591

 
$

 
$
46,123

Cost of sales
 
(16,702
)
 
(8,398
)
 

 
(25,100
)
Gross margin
 
11,830

 
9,193

 

 
21,023

Selling, general and administrative
 

 

 
(16,868
)
 
(16,868
)
Research and development
 

 

 
(1,475
)
 
(1,475
)
Operating income
 
$
11,830

 
$
9,193

 
$
(18,343
)
 
$
2,680

Information concerning Fuel Tech’s operations by geographic area is provided below. Revenues are attributed to countries based on the location of the customer. Assets are those directly associated with operations of the geographic area.
 
 
 
Three Months Ended 
 June 30,
 
Six Months Ended 
 June 30,
 
 
2013
2012
 
2013
2012
Revenues:
 
 
 
 
 
 
United States
 
$
17,244

$
17,966

 
$
30,110

$
40,910

Foreign
 
11,848

2,945

 
21,466

5,213

 
 
$
29,092

$
20,911

 
$
51,576

$
46,123


 
 
June 30,
2013
 
December 31,
2012
Assets:
 
 
 
 
United States
 
$
92,860

 
$
86,466

Foreign
 
20,212

 
19,431

 
 
$
113,072

 
$
105,897

 
Note M:        Contingencies
Fuel Tech issues a standard product warranty with the sale of its products to customers. Our recognition of warranty liability is based primarily on analyses of warranty claims experienced in the preceding years as the nature of our historical product sales for which we offer a warranty are substantially unchanged. This approach provides an aggregate warranty accrual that is historically aligned with actual warranty claims experienced.



12

Table of Contents

Changes in the warranty liability for the six months June 30, 2013, and 2012, are summarized below:
 
 
 
Six Months Ended 
 June 30,
 
 
2013
 
2012
Aggregate product warranty liability at beginning of period
 
$
776

 
$
313

Net aggregate expense related to product warranties
 
98

 
415

Aggregate reductions for payments
 
(72
)
 
(213
)
Aggregate product warranty liability at end of period
 
$
802

 
$
515

 
Note N:        Income Taxes
The Company’s effective tax rate of 39.0% and 38.0% for the six-month periods ended June 30, 2013 and 2012, respectively, differs from the statutory federal tax rate of 34% due primarily to state taxes, non-deductible stock-based compensation, differences between U.S. and foreign tax rates, foreign losses incurred with no related tax benefit, changes in state rates, and non-deductible meals and entertainment expenses.
Fuel Tech had unrecognized tax benefits as of December 31, 2012 in the amount of $42, all of which, if ultimately recognized, will reduce Fuel Tech's annual effective tax rate. There have been no material changes in unrecognized tax benefits during the three- and six- month periods ended June 30, 2013.
 
Note O:        Goodwill and Other Intangibles
Goodwill is allocated among and evaluated for impairment at the reporting unit level, which is defined as an operating segment or one level below an operating segment. Fuel Tech has two reporting units which are reported in the FUEL CHEM® technology segment and the APC technology segment. At June 30, 2013 and December 31, 2012, goodwill allocated to the FUEL CHEM technology segment was $1,723 while goodwill allocated to the APC technology segment was $19,328.
Goodwill is allocated to each of our reporting units after considering the nature of the net assets giving rise to the goodwill and how each reporting unit would enjoy the benefits and synergies of the net assets acquired. Our last fair value measurement test, performed annually as of October 1, revealed no indications of impairment. There were no indications of goodwill impairment in the six-month periods ended June 30, 2013 and 2012.
Fuel Tech reviews other intangible assets, which include customer lists and relationships, covenants not to compete, patent assets, tradenames, and acquired technologies, for impairment on a recurring basis or when events or changes in circumstances indicate the carrying amount of an asset may not be recoverable. In the event that impairment indicators exist, a further analysis is performed and if the sum of the expected undiscounted future cash flows resulting from the use of the asset is less than the carrying amount of the asset, an impairment loss equal to the excess of the asset’s carrying value over its fair value is recorded. Management considers historical experience and all available information at the time the estimates of future cash flows are made, however, the actual cash values that could be realized may differ from those that are estimated. There were no indications of intangible asset impairment in the three- and six-month periods ended June 30, 2013 and 2012.
 
Note P:        Fair Value
The Company applies authoritative accounting guidance for fair value measurements of financial and nonfinancial assets and liabilities. This guidance defines fair value, establishes a consistent framework for measuring fair value and expands disclosure for each major asset and liability category measured at fair value on either a recurring or nonrecurring basis and clarifies that fair value is an exit price, representing the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. As such, fair value is a market-based measurement that should be determined based on assumptions that market participants would use in pricing an asset or liability. As a basis for considering such assumptions, the standard establishes a three-tier fair value hierarchy, which prioritizes the inputs used in measuring fair value as follows:
 
Level 1 – Observable inputs to the valuation methodology such as quoted prices in active markets for identical assets or liabilities
Level 2 – Inputs to the valuation methodology including quoted prices for similar assets or liabilities in active markets, quoted prices for identical assets of liabilities in inactive markets, inputs other than quoted prices that are observable for the asset or liability, and inputs that are derived principally from or corroborated by observable market data by correlation or other means
Level 3 – Significant unobservable inputs in which there is little or no market data, which require the reporting entity to develop its own estimates and assumptions or those expected to be used by market participants. Generally, these fair value measures are model-based valuation techniques such as discounted cash flows, option pricing models, and other commonly used valuation techniques

13

Table of Contents

The fair value of our marketable securities was $24 and $44 at June 30, 2013 and December 31, 2012, respectively, and was determined using quoted prices in active markets for identical assets (Level 1 fair value measurements). Transfers between levels of the fair value hierarchy are recognized based on the actual date of the event or change in circumstances that caused the transfer. We had no assets or liabilities that were valued using level 2 or level 3 inputs and therefore there were no transfers between levels of the fair value hierarchy during the six-month periods ended June 30, 2013.
The carrying amount of our short-term debt and revolving line of credit approximates fair value due to its short-term nature and because the amounts outstanding accrue interest at variable market-based rates.
 
Note Q:        Recently Added and Pending Accounting Pronouncements

In February 2013, the FASB issued changes to the reporting of amounts reclassified out of accumulated other comprehensive income. These changes require an entity to report the effect of significant reclassifications out of accumulated other comprehensive income on the respective line items in net income if the amount being reclassified is required to be reclassified in its entirety to net income. For other amounts that are not required to be reclassified in their entirety to net income in the same reporting period, an entity is required to cross-reference other disclosures that provide additional detail about those amounts. These requirements are to be applied to each component of accumulated other comprehensive income. These changes were adopted by Fuel Tech on January 1, 2013 and did not have an impact on the Consolidated Financial Statements other than the additional disclosure requirements.

In February 2013, the FASB issued changes to the accounting for obligations resulting from joint and several liability arrangements. These changes require an entity to measure such obligations for which the total amount of the obligation is fixed at the reporting date as the sum of (i) the amount the reporting entity agreed to pay on the basis of its arrangement among its co-obligors, and (ii) any additional amount the reporting entity expects to pay on behalf of its co-obligors. An entity will also be required to disclose the nature and amount of the obligation as well as other information about those obligations. Examples of obligations subject to these requirements are debt arrangements and settled litigation and judicial rulings. These changes become effective for Fuel Tech on January 1, 2014. Management has determined that the adoption of these changes will not have an impact on the Consolidated Financial Statements, as Fuel Tech does not currently have any such arrangements.

In March 2013, the FASB issued changes to a parent entity's accounting for the cumulative translation adjustment upon derecognition of certain subsidiaries or groups of assets within a foreign entity or of an investment in a foreign entity. A parent entity is required to release any related cumulative foreign currency translation adjustment from accumulated other comprehensive income into net income in the following circumstances: (i) a parent entity ceases to have a controlling financial interest in a subsidiary or group of assets that is a business within a foreign entity if the sale or transfer results in the complete or substantially complete liquidation of the foreign entity in which the subsidiary or group of assets had resided; (ii) a partial sale of an equity method investment that is a foreign entity; (iii) a partial sale of an equity method investment that is not a foreign entity whereby the partial sale represents a complete or substantially complete liquidation of the foreign entity that held the equity method investment; and (iv) the sale of an investment in a foreign entity. These changes become effective for Fuel Tech on January 1, 2014. Management has determined that the adoption of these changes will need to be considered in the Consolidated Financial Statements in the event Fuel Tech initiates any of the transactions described above.

 
Note R:        Share Repurchase Program
In August 2011, Fuel Tech’s Board of Directors authorized the repurchase of up to $6 million of its outstanding common shares through December 31, 2012. This initial program was completed in the quarter ended March 31, 2012. In May 2012, the Board of Directors authorized a second repurchase program allowing the Company to repurchase up to an additional $6 million of its outstanding common shares through June 30, 2013 and this repurchase program was completed in September 2012. The share repurchase programs were funded through the Company’s existing cash on hand. Purchases made pursuant to the programs are made in the open market. The timing, manner, price and amount of any repurchases are determined by the Company in its discretion and are subject to economic and market conditions, stock price, applicable legal requirements, and other factors.
During the course of the share repurchase programs, Fuel Tech repurchased an aggregate of 2,306,590 common shares for a total cost of approximately $12,000 including commissions of approximately $76. These acquired shares have been retired and are no longer shown as issued or outstanding shares.





14

Table of Contents

The following table summarizes our share repurchase programs since their inception:
 
Period
 
Total Number
of Shares
Purchased
 
Average Price
Paid Per Share
 
Total Cost
 
Maximum Dollar
Value of Shares
That May Yet Be
Purchased Under
the Program
Phase One Program
 
 
 
 
 
 
 
 
August 25, 2011 through September 30, 2011
 
571,554

 
$
5.89

 
$
3,367

 
$
2,633

October 1, 2011 through December 31, 2011
 
130,160

 
5.71

 
744

 
1,889

January 1, 2012 through March 31, 2012
 
334,636

 
5.64

 
1,889

 

Phase Two Program
 
 
 
 
 
 
 
 
April 1, 2012 through June 30, 2012
 
1,124,797

 
4.70

 
5,290

 
710

July 1, 2012 through September 30, 2012
 
145,443

 
4.88

 
710

 

Total
 
2,306,590

 
$
5.20

 
$
12,000

 
$



15

Table of Contents

FUEL TECH, INC.
Item 2.        Management’s Discussion and Analysis of Financial Condition and Results of Operations    
Results of Operations
Revenues for the three months ended June 30, 2013 and 2012 were $29,092 and $20,911, respectively, representing an increase of 39% versus the same period last year. Revenues for the six months ended June 30, 2013 increased 12% to $51,576 from $46,123 for the six months ended June 30, 2012.
The Air Pollution Control (APC) technology segment generated revenues of $20,239 and $33,186 for the three- and six-months ended June 30, 2013, respectively, an increase of $7,421 or 58%, and $4,654 or 16%, from the prior year periods reflecting work progress on international and domestic construction project bookings, particularly from a large project in Chile.
Consolidated APC backlog at June 30, 2013 was $45,135 versus backlog at June 30, 2012 of $20,100. Our current backlog consists of US domestic projects totaling $15,763 and international projects totaling $29,372.
The FUEL CHEM® technology segment generated revenues of $8,853 and $18,390 for the three- and six-months ended June 30, 2013, respectively, an increase of $760, or 9%, and $799, or 5%, versus the respective prior year periods. The increase is due to a higher level of shipping activity at a few key existing customer accounts. However, the overall FUEL CHEM technology segment is still affected by the soft electric demand market and fuel switching as a result of low natural gas prices, which have led to unscheduled outages and coal combustion units operating at less than full capacity.
Consolidated gross margin percentage for the three-month periods ended June 30, 2013 and 2012 were 41% and 43%, respectively. For the three-month period, the gross margin percentage for the APC technology segment decreased to 35% from 38% in the comparable prior-year period, primarily due to an increase in the volume of lower margin foreign projects. For the FUEL CHEM technology segment, the gross margin percentage increased to 53% from 51% in the comparable prior-year quarter due to a higher margin mix of customer orders and the non-recurring sale of lower margin installation work that was recognized in the first two quarters of 2012, which diluted the margin percentage for those periods.

Consolidated gross margin percentage for the six months ended June 30, 2013 and 2012 was 41% and 46%, respectively. The gross margin percentage for the APC technology segment decreased to 35% from 41% due to an increase in lower margin foreign projects as described above. For the FUEL CHEM technology segment, the gross margin percentage increased slightly to 53% from 52% due to the margin mix of customer shipments, including the aforementioned non-recurring sale of low margin installation work recognized in the first half of 2012

Selling, general and administrative expenses (SG&A) for the three-month periods ended June 30, 2013 and 2012 were $9,307 and $7,874, respectively. This represents a six point decrease in SG&A as a percentage of revenues to 32% from 38%. On a total dollar basis SG&A increased $1,433 for the quarter versus the prior year, which was the result of increases in employee related costs of $240, outside service fees of $534, stock compensation of $174, and administrative costs associated with our foreign operations of $519, which were partially offset by a decrease in bonuses and commissions of $65 and professional fees of $102. SG&A for the six-month periods ended June 30, 2013 and 2012 were $17,765 and $16,868, respectively, which represents a two point decrease as a percentage of revenues to 34% from 37%. The increase of $897 on a total dollar basis was primarily related to increases in employee related costs of $158, outside service fees of $586, stock compensation of $324, travel costs of $137, and administrative costs related to our foreign subsidiaries of $703, partially offset by a decrease in bonuses and commissions of $492 and professional fees of $712.

Research and development expenses for the three- and six-month periods ended June 30, 2013 were $430 and $1,363, respectively, compared to $969 and $1,475, in the same prior-year periods. The Company plans to continue focusing on increased R&D efforts in the pursuit of commercial applications for its technologies outside of its traditional markets, and in the development and analysis of new technologies that could represent incremental market opportunities.

Interest expense for the three- and six-month periods ended June 30, 2013 and 2012 were $10 and $10, and $49 and $74, respectively, and related to borrowings under the Beijing Fuel Tech Facility.

Income tax expense for the three- and six- months ended ended June 30, 2013 and 2012 were $767 and $764, and $39 and $984, respectively, and reflective of the Company's net income for the respective quarters. The Company is projecting a consolidated effective tax rate of 38% for 2013.




16

Table of Contents

Liquidity and Sources of Capital

At June 30, 2013, Fuel Tech had cash and cash equivalents and short-term investments on hand of $23,137 and working capital of $41,909 versus $24,497 and $38,918 at December 31, 2012, respectively.

Operating activities used cash of $492 during the six-month period ended June 30, 2013. This decrease in cash from operations was primarily due to an increase in the outstanding accounts receivable balance of $11,084 and inventories of $202, offset by cash generated by our net income of $1,215 plus non-cash expenses of $2,957, a decrease in prepaid and other current assets of $2,584, and an increase in the outstanding payable and accrued expense balances of $4,038.

Investing activities used cash of $1,326 during the six-month period ended June 30, 2013 due to purchases of equipment and patents.

Financing activities generated cash of $448 as a result of proceeds borrowed under our Beijing Fuel Tech credit facility in the amount of $799, offset by cash used of $351 for the acquisition of common shares held in treasury that were withheld from employees for taxes due upon lapsing of restricted stock units.

On June 30, 2013, Fuel Tech amended its existing revolving credit facility (the Facility) with JPMorgan Chase Bank, N.A (JPM Chase) to extend the maturity date through June 30, 2015. The total borrowing base of the facility is $15,000 and contains a provision to increase the facility up to a total principal amount of $25,000 upon approval from JPM Chase. The Facility is unsecured, bears interest at a rate of LIBOR plus a spread range of 250 basis points to 375 basis points, as determined by a formula related to the Company’s leverage ratio, and has the Company’s Italian subsidiary, Fuel Tech S.r.l., as a guarantor. Fuel Tech can use this Facility for cash advances and standby letters of credit. As of June 30, 2013 and December 31, 2012, there were no outstanding borrowings on the credit facility.
The Facility contains several debt covenants with which the Company must comply on a quarterly or annual basis, including a maximum Funded Debt to EBITDA Ratio (or “Leverage Ratio”, as defined in the Facility) of 2.0:1.0 based on the four trailing quarterly periods. Maximum funded debt is defined as all borrowed funds, outstanding standby letters of credit and bank guarantees. EBITDA includes after tax earnings with add backs for interest expense, income taxes, depreciation and amortization, and stock-based compensation expenses. In addition, the Facility covenants include an annual capital expenditure limit of $10,000 and a minimum tangible net worth of $55,000, adjusted upward for 50% of net income generated and 100% of all capital issuances. At June 30, 2013, the Company was in compliance with all financial covenants specified by the Facility.
At June 30, 2013 and December 31, 2012, the Company had outstanding standby letters of credit and bank guarantees totaling approximately $6,952 and $7,432, respectively, on its domestic credit facility in connection with contracts in process. Fuel Tech is committed to reimbursing the issuing bank for any payments made by the bank under these instruments. At June 30, 2013 and December 31, 2012, there were no cash borrowings under the domestic revolving credit facility and approximately $8,048 and $7,568, respectively, was available for future borrowings. The Company pays a commitment fee of 0.25% per year on the unused portion of the revolving credit facility.
On June 28, 2013, Beijing Fuel Tech Environmental Technologies Company, Ltd. (Beijing Fuel Tech), a wholly-owned subsidiary of Fuel Tech, entered into a new revolving credit facility (the China Facility) agreement with JPM Chase for RMB 35 million (approximately $5,655), which expires on June 27, 2014. This new credit facility replaced the previous RMB 35 million facility that expired on June 28, 2013. The facility is unsecured, bears interest at a rate of 125% of the People’s Bank of China (PBOC) Base Rate, and is guaranteed by Fuel Tech. Beijing Fuel Tech can use this facility for cash advances and bank guarantees. As of June 30, 2013 and December 31, 2012, Beijing Fuel Tech has borrowings outstanding in the amount of $807 and $0, respectively. These borrowings were subject to interest rates of approximately 7.0% at June 30, 2013 and December 31, 2012, respectively.
At June 30, 2013 and December 31, 2012, the Company had outstanding standby letters of credit and bank guarantees totaling approximately $1,101 and $1,112, respectively, on its Beijing Fuel Tech revolving credit facility in connection with contracts in process. At June 30, 2013 and December 31, 2012, approximately $3,747 and $4,429 was available for future borrowings.
In the event of default on either the domestic facility or the China facility, the cross default feature in each allows the lending bank to accelerate the payments of any amounts outstanding and may, under certain circumstances, allow the bank to cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy the payment due, may require the Company to obtain alternate financing to satisfy the accelerated payment.
In the opinion of management, Fuel Tech’s expected near-term revenue growth will be driven by the timing of penetration of the utility marketplace via utilization of its TIFI technology, by utility and industrial entities’ adherence to the NOx reduction requirements of the various domestic environmental regulations, and by the expansion of both business segments in non-U.S. geographies. Fuel Tech expects its liquidity requirements to be met by the operating results generated from these activities.

17

Table of Contents

Contingencies and Contractual Obligations
Fuel Tech issues a standard product warranty with the sale of its products to customers as discussed in Note M. The warranty liability balance during the six-months ended June 30, 2013 increased by approximately $26.
Forward-Looking Statements
This Quarterly Report on Form 10-Q contains “forward-looking statements,” as defined in Section 21E of the Securities Exchange Act of 1934, as amended, which are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 and reflect Fuel Tech’s current expectations regarding future growth, results of operations, cash flows, performance and business prospects, and opportunities, as well as assumptions made by, and information currently available to, our management. Fuel Tech has tried to identify forward-looking statements by using words such as “anticipate,” “believe,” “plan,” “expect,” “estimate,” “intend,” “will,” and similar expressions, but these words are not the exclusive means of identifying forward-looking statements. These statements are based on information currently available to Fuel Tech and are subject to various risks, uncertainties, and other factors, including, but not limited to, those discussed in Fuel Tech’s Annual Report on Form 10-K for the year ended December 31, 2012 in Item 1A under the caption “Risk Factors,” which could cause Fuel Tech’s actual growth, results of operations, financial condition, cash flows, performance and business prospects and opportunities to differ materially from those expressed in, or implied by, these statements. Fuel Tech undertakes no obligation to update such factors or to publicly announce the results of any of the forward-looking statements contained herein to reflect future events, developments, or changed circumstances or for any other reason. Investors are cautioned that all forward-looking statements involve risks and uncertainties, including those detailed in Fuel Tech’s filings with the Securities and Exchange Commission.
 
Item 3.        Quantitative and Qualitative Disclosures about Market Risk
Foreign Currency Risk Management
Fuel Tech’s earnings and cash flow are subject to fluctuations due to changes in foreign currency exchange rates. We do not enter into foreign currency forward contracts nor into foreign currency option contracts to manage this risk due to the immaterial nature of the transactions involved.
Fuel Tech is also exposed to changes in interest rates primarily due to its debt facilities (refer to Note K to the consolidated financial statements). A hypothetical 100 basis point adverse move in interest rates along the entire interest rate yield curve would not have a materially adverse effect on interest expense during the upcoming year ended December 31, 2013.
 
Item 4.        Controls and Procedures
Evaluation of Disclosure Controls and Procedures
Fuel Tech maintains disclosure controls and procedures and internal controls designed to ensure (a) that information required to be disclosed in Fuel Tech’s filings under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and (b) that such information is accumulated and communicated to management, including the principal executive and financial officer, as appropriate to allow timely decisions regarding required disclosure. Fuel Tech’s Chief Executive Officer and Chief Financial Officer have evaluated the Company’s disclosure controls and procedures, as defined in Rules 13a – 15(e) and 15d -15(e) of the Exchange Act, as of the end of the period covered by this report, and they have concluded that these controls and procedures are effective.
Changes in Internal Control over Financial Reporting
There has been no change in the Company’s internal control over financial reporting during the quarter covered by this report that has materially affected, or is reasonably likely to materially affect, its internal control over financial reporting.

18

Table of Contents

PART II. OTHER INFORMATION

Item 1.    Legal Proceedings
We are from time to time involved in litigation incidental to our business. We are not currently involved in any litigation in which we believe an adverse outcome would have a material effect on our business, financial conditions, results of operations, or prospects.
 
Item 1A.        Risk Factors
The risk factors included in our Annual Report on Form 10-K for fiscal year ended December 31, 2012 have not materially changed.
 
Item 2.        Unregistered Sales of Equity Securities and Use of Proceeds
In August 2011, Fuel Tech’s Board of Directors authorized the repurchase of up to $6 million of its outstanding common shares through December 31, 2012. This initial program was completed in the quarter ended June 30, 2012. In May 2012, the Board of Directors authorized a second repurchase program allowing the Company to repurchase up to an additional $6 million of its outstanding common shares through June 30, 2013 and this repurchase program was completed in September 2012. The share repurchase programs were funded through the Company’s existing cash on hand. Purchases made pursuant to the programs are made in the open market. The timing, manner, price and amount of any repurchases are determined by the Company in its discretion and are subject to economic and market conditions, stock price, applicable legal requirements, and other factors.
During the course of the share repurchase programs, Fuel Tech repurchased an aggregate of 2,306,590 common shares for a total cost of approximately $12,000 including commissions of approximately $76. These acquired shares have been retired and are no longer shown as issued or outstanding shares.
The following table summarizes our share repurchase programs since their inception:
 
Period
 
Total Number
of Shares
Purchased
 
Average Price
Paid Per Share
 
Total Cost
 
Maximum Dollar
Value of Shares
That May Yet Be
Purchased Under
the Program
Phase One Program
 
 
 
 
 
 
 
 
August 25, 2011 through September 30, 2011
 
571,554

 
$
5.89

 
$
3,367

 
$
2,633

October 1, 2011 through December 31, 2011
 
130,160

 
5.71

 
744

 
1,889

January 1, 2012 through March 31, 2012
 
334,636

 
5.64

 
1,889

 

Phase Two Program
 
 
 
 
 
 
 
 
April 1, 2012 through June 30, 2012
 
1,124,797

 
4.70

 
5,290

 
710

July 1, 2012 through September 30, 2012
 
145,443

 
4.88

 
710

 

Total
 
2,306,590

 
$
5.20

 
$
12,000

 
$

 

19

Table of Contents

Item 6.        Exhibits

a.
Exhibits (all filed herewith)
 
 
 
 
 
4.1
  
Fourth Amendment to Credit Agreement, dated as of June 30, 2013, between JPMorgan Chase Bank, N.A. and Fuel Tech, Inc.
 
 
 
 
31.1
  
Certification of CEO pursuant to Section 302 of Sarbanes-Oxley Act of 2002
 
 
 
 
31.2
  
Certification of CFO pursuant to Section 302 of Sarbanes-Oxley Act of 2002
 
 
 
 
32
  
Certification of CEO and CFO pursuant to Section 906 of Sarbanes-Oxley Act of 2002
 
 
 
 
101.1
  
INSXBRL Instance Document
 
 
 
 
101.2
  
SCHXBRL Taxonomy Extension Schema Document
 
 
 
 
101.3
  
CALXBRL Taxonomy Extension Calculation Linkbase Document
 
 
 
 
101.4
  
DEFXBRL Taxonomy Extension Definition Linkbase Document
 
 
 
 
101.5
  
LABXBRL Taxonomy Extension Label Linkbase Document
 
 
 
 
101.6
  
PREXBRL Taxonomy Extension Prevention Linkbase Document


20

Table of Contents

FUEL TECH, INC.
Signatures
Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
Date: August 7, 2013
By:
/s/ Douglas G. Bailey
 
 
Douglas G. Bailey
 
 
President and Chief Executive Officer
 
 
(Principal Executive Officer)

Date: August 7, 2013
By:
/s/ David S. Collins
 
 
David S. Collins
 
 
Senior Vice President and Chief Financial Officer
 
 
(Principal Financial Officer)


21