UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

______________________________________________________________________________________________

FORM 10-K

______________________________________________________________________________________________

[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934



For the fiscal year ended June 30, 2018

Commission file number: 001-15317

______________________________________________________________________________________________

ResMed Inc.

(Exact name of registrant as specified in its charter)

______________________________________________________________________________________________

Delaware

(State or other jurisdiction of incorporation or organization)

98-0152841

(IRS Employer Identification No.)

9001 Spectrum Center Blvd.

San Diego, CA 92123

United States of America

(Address of principal executive offices)

(858) 836-5000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

TITLE OF EACH CLASS

Common Stock, $0.004 Par Value

Name of each exchange upon which registered

New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act

None

______________________________________________________________________________________________

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.     Yes  ☒    No   ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.     Yes  ☐    No   ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes  ☒    No   ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     Yes  ☒    No   ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulations S-K (§ 229.405 of this Chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K     ☒

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company.  See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act. 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.     ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes  ☐    No   ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of registrant as of December 31, 2017 (the last business day of the registrant’s most recently completed second fiscal quarter), computed by reference to the closing sale price of such stock on the New York Stock Exchange, was $12,028,140,357. All directors, executive officers, and 10% stockholders of registrant are considered affiliates.

At  August 9, 2018, registrant had 142,684,034 shares of Common Stock, $0.004 par value, issued and outstanding. This number excludes 41,636,234 shares held by the registrant as treasury shares.

Portions of the registrant’s definitive Proxy Statement to be delivered to stockholders in connection with the registrant’s 2018 Annual Meeting of Stockholders, to be filed subsequent to the date hereof, are incorporated by reference into Part III of this report.



 

---

 

TABLE OF CONTENTS

 



As used in this 10-K, the terms “we”, “us”, “our” and “the Company” refer to ResMed Inc., a Delaware corporation, and its subsidiaries, on a consolidated basis, unless otherwise stated.

 



 

---

 

PART I



Cautionary Note Regarding Forward-Looking Statements



This report contains certain forward-looking statements and information that are based on the beliefs of our management as well as estimates and assumptions made by, and information currently available to our management. All statements other than statements regarding historical facts are forward-looking statements. The words “believe,” “expect,” “intend,” “anticipate,” “will,” “estimate,” “plan,” “future” and other similar expressions, and negative statements of such expressions, generally identify forward-looking statements, including, in particular, statements regarding projections of future revenue or earnings, expenses, new product development, new product launches, new markets for its products, the integration of acquisitions, leveraging of strategic investments, litigation, and tax outlook.  These forward-looking statements are made in accordance with the safe harbor provisions of the Private Securities Litigation Reform Act of 1995.  You are cautioned not to place undue reliance on these forward-looking statements. Forward-looking statements reflect the views of our management at the time the statements are made and are subject to a number of risks, uncertainties, estimates and assumptions, including, without limitation, and in addition to those identified in the text surrounding such statements, those identified in Item 1A “Risk Factors” and elsewhere in this report. 



In addition, important factors to consider in evaluating such forward-looking statements include changes or developments in healthcare reform, social, economic, market, legal or regulatory circumstances, changes in our business or growth strategy or an inability to execute our strategy due to changes in our industry or the economy generally, the emergence of new or growing competitors, the actions or omissions of third parties, including suppliers, customers, competitors and governmental authorities, and various other factors. If any one or more of these risks or uncertainties materialize, or underlying estimates or assumptions prove incorrect, actual results may vary significantly from those expressed in our forward-looking statements, and there can be no assurance that the forward-looking statements contained in this report will in fact occur.

 

ITEM 1  BUSINESS



General



We are a global leader in the development, manufacturing, distribution and marketing of medical devices and cloud-based software applications that diagnose, treat and manage respiratory disorders including sleep disordered breathing, or SDB, chronic obstructive pulmonary disease, or COPD, neuromuscular disease and other chronic diseases. SDB includes obstructive sleep apnea, or OSA, and other respiratory disorders that occur during sleep. Our products and solutions are designed to improve patient quality of life, reduce the impact of chronic disease and lower healthcare costs as global healthcare systems continue to drive a shift in care from hospitals to the home and lower cost settings. Our cloud-based software digital health applications, along with our devices are designed to provide connected care to improve patient outcomes and efficiencies for our customers.



Following our formation in 1989, we commercialized a treatment for OSA. This treatment, nasal Continuous Positive Airway Pressure, or CPAP, was the first successful noninvasive treatment for OSA. CPAP systems deliver pressurized air, typically through a nasal mask, to prevent collapse of the upper airway during sleep.



Since the development of CPAP, we have expanded our business by developing or acquiring a number of innovative products and solutions for a broader range of respiratory disorders including technologies to be applied in medical and consumer products, ventilation devices, diagnostic products, mask systems for use in the hospital and home, headgear and other accessories, dental devices, portable oxygen concentrators, or POCs and cloud-based software informatics solutions to manage patient outcomes and customer and provider business processes. Our growth has been fueled by geographic expansion, our research and product development efforts, acquisitions and an increasing awareness of SDB and respiratory conditions like COPD as significant health concerns.



We employ approximately 6,000 people and sell our products in approximately 120 countries through a combination of wholly owned subsidiaries and independent distributors.



Our web site address is www.resmed.com.  We make our periodic reports, together with any amendments, available on our website, free of charge, as soon as reasonably practicable after we electronically file or furnish the reports with the Securities and Exchange Commission, or SEC.  Information contained on the website is not part of or incorporated into this report.



---

 

Corporate History



ResMed Inc., a Delaware corporation, was formed in March 1994 as the ultimate holding company for our operating subsidiaries. In June 1995, we completed an initial public offering of common stock and our common stock began trading on the NASDAQ National Market. In September 1999, we transferred our principal listing to the New York Stock Exchange, or NYSE, trading under the ticker symbol “RMD”. In November 1999, we established a secondary listing of our common stock via Chess Depositary Instruments, or CDIs, on the Australian Stock Exchange (now known as the Australian Securities Exchange), or ASX, also under the symbol “RMD”. Ten CDIs on the ASX represent one share of our common stock on the NYSE.



Our Australian subsidiary, ResMed Holdings Limited, was originally organized in 1989 by Dr. Peter Farrell to acquire from Baxter Center for Medical Research Pty Limited, or Baxter, the rights to certain technology relating to CPAP treatment as well as Baxter’s existing CPAP device business. Baxter acquired the rights to the technology in 1987, and sold CPAP devices in Australia from 1988 until our acquisition of the business.



Since formation we have acquired a number of businesses, including distributors, suppliers, developers of medical equipment and related technologies and software solutions providers.



Segment Information



We have determined that we predominantly operate in a single operating segment, which is the sleep and respiratory disorders sector of the medical device industry.  Due to the acquisition of Brightree LLC (“Brightree”) in April 2016, our operations now include the supply of business management software and services to medical equipment and home health providers.  However, these operations, both in terms of revenue and profit, are not material to our global operations and have not been separately reported.  See Note 15 – Segment Information of the Notes to Financial Statements (Part II, Item 8) for financial information regarding segment reporting.  Financial information about our revenues from and assets located in foreign countries is also included in the notes to our consolidated financial statements.



The Market



We are focused on the sleep and related respiratory care markets, both of which we believe are globally underpenetrated markets, and where we believe our products can improve patient outcomes, create efficiencies for our customers, help physicians and providers better manage chronic disease and reduce overall healthcare system costs.



Sleep



Sleep is a complex neurological process that includes two distinct states: rapid eye movement, or REM, sleep and non-rapid eye movement, or non-REM, sleep. REM sleep, which is about 20-25% of total sleep experienced by adults, is characterized by a high level of brain activity, bursts of rapid eye movement, increased heart and respiration rates, and paralysis of many muscles. Non-REM sleep is subdivided into four stages that generally parallel sleep depth; stage 1 is the lightest and stage 4 is the deepest.



The upper airway has no rigid support and is held open by active contraction of upper airway muscles. Normally, during REM sleep and deeper levels of non-REM sleep, upper airway muscles relax and the airway narrows. Individuals with narrow upper airways or poor muscle tone are prone to temporary collapses of the upper airway during sleep, called apneas, and to near closures of the upper airway called hypopneas. These breathing events result in a lowering of blood oxygen concentration, causing the central nervous system to react to the lack of oxygen or increased carbon dioxide and signaling the body to respond. Typically, the individual subconsciously arouses from sleep, causing the throat muscles to contract, opening the airway. After a few gasping breaths, blood oxygen levels increase and the individual can resume a deeper sleep until the cycle repeats itself. Sufferers of OSA typically experience ten or more such cycles per hour. While these awakenings greatly impair the quality of sleep, the individual is not normally aware of these disruptions. In addition, OSA has been recognized as a cause of hypertension and a significant co-morbidity for heart disease, stroke and diabetes.



A long-term epidemiology study published in 2013 estimated that 26% of adults age 30-70 have some form of obstructive sleep apnea. In the United States alone, this represents approximately 46 million people. Another study published in 2018 estimated that mild to severe sleep apnea impacts more than 936 million people worldwide, of which, it was estimated that more than 424 million would have moderate to severe sleep apnea.   Despite the high prevalence of OSA, there is a general lack of awareness of OSA among both the medical community and the general public. It is estimated that less than 20% of those with OSA have been diagnosed or treated. Many healthcare professionals are often unable to diagnose OSA because they are unaware that such non-specific symptoms as excessive daytime sleepiness, snoring, hypertension and irritability are characteristic of OSA.



---

 

While OSA has been diagnosed in a broad cross-section of the population, until recently, it has typically been diagnosed among middle-aged men who are obese. However, we believe the importance of OSA in women is increasingly being recognized, with nearly 40% of new PAP patients being female. A strong association has been discovered between OSA and a number of cardiovascular and metabolic diseases. Studies have shown that SDB is present in approximately 83% of patients with drug-resistant hypertension, approximately 72% of patients with type 2 diabetes, approximately 77% of patients with obesity and approximately 76% of patients with chronic heart failure.



Sleep-Disordered Breathing and Obstructive Sleep Apnea



Sleep-disordered breathing encompasses all disease processes that cause abnormal breathing patterns during sleep. Manifestations include OSA, central sleep apnea, or CSA, and hypoventilation syndromes that occur during sleep. Hypoventilation syndromes are generally associated with obesity, chronic obstructive lung disease and neuromuscular disease. OSA is the most common form of SDB.



Sleep fragmentation and the loss of the deeper levels of sleep caused by OSA can lead to excessive daytime sleepiness, reduced cognitive function, including memory loss and lack of concentration, depression and irritability. OSA sufferers also experience an increase in heart rate and an elevation of blood pressure during the cycle of apneas. Several studies indicate that the oxygen desaturation, increased heart rate and elevated blood pressure caused by OSA may be associated with increased risk of cardiovascular morbidity and mortality due to angina, stroke and heart attack. Patients with OSA have been shown to have impaired daytime performance in a variety of cognitive functions including problem solving, response speed and visual motor coordination, and studies have linked OSA to increased occurrences of traffic and workplace accidents.



Generally, an individual seeking treatment for the symptoms of OSA is referred by a general practitioner to a sleep specialist for further evaluation. The diagnosis of OSA typically requires monitoring the patient during sleep at either a sleep clinic or the patient’s home. During overnight testing, respiratory parameters and sleep patterns may be monitored, along with other vital signs such as heart rate and blood oxygen levels. Simpler tests, using devices such as our Apnealink Air, or our automatic positive airway pressure devices, monitor airflow during sleep, and use computer programs to analyze airflow patterns. These tests allow sleep clinicians to detect any sleep disturbances such as apneas, hypopneas or subconscious awakenings.



Before 1981, the primary treatment for OSA was a tracheotomy, a surgical procedure to create a hole in the patient’s windpipe. Alternative surgical treatments have involved either uvulopalatopharyngoplasty, or UPPP, in which surgery is performed on the upper airway to remove excess tissue and to streamline the shape of the airway or implanting a device to add support to the soft palate. UPPP alone has a poor success rate; however, when performed in conjunction with multi-stage upper airway surgical procedures, a greater success rate has been claimed. These combined procedures, performed by highly specialized surgeons, are expensive and involve prolonged and often painful recovery periods.  Surgical treatments are not considered first line therapy for OSA.  Other alternative treatments available today include nasal surgery, mandibular advancement surgery, dental appliances, palatal implants, somnoplasty, nasal devices and electrical stimulation of the nerves or muscles.  Alternative pharmaceutical therapy treatments are reported to be under development.



A variety of devices are marketed for the treatment of OSA. Most are only partially effective, but CPAP is a reliable treatment for all severities of OSA and is considered first-line therapy. Use of mandibular advancement devices is increasing as a second-line option in patients unable to use CPAP or those with mild OSA. These devices cause the mandible and tongue to be pulled forward and improve the dimensions of the upper airway.  CPAP is a non-invasive means of treating OSA. CPAP was first used as a treatment for OSA in 1980 by Dr. Colin Sullivan, the past Chairman of our Medical Advisory Board and was commercialized for treatment of OSA in the United States in the mid-1980s.  During CPAP treatment, a patient sleeps with a nasal interface connected to a small portable air device that delivers room air at a positive pressure. The patient breathes in air from the device and breathes out through an exhaust port in the interface. Continuous air pressure applied in this manner acts as a pneumatic splint to keep the upper airway open and unobstructed. Interfaces include nasal masks and nasal pillows. Sometimes, when a patient leaks air through their mouth, a full-face mask may need to be used, rather than a nasal interface.



CPAP is not a cure and, therefore, must be used on a nightly basis as long as treatment is required. Patient compliance has been a major factor in the efficacy of CPAP treatment. Early generations of CPAP units provided limited patient comfort and convenience. Patients experienced soreness from the repeated use of nasal masks and had difficulty falling asleep with the CPAP device operating at the prescribed pressure. In more recent years, product innovations to improve patient comfort and compliance have been developed. These include more comfortable patient interface systems; delay timers that gradually raise air pressure allowing the patient to fall asleep more easily; bilevel air devices, including Variable Positive Airway Pressure, or VPAP systems, which provide different air pressures for inhalation and exhalation; heated humidification systems to make the airflow more comfortable; and autotitration devices that reduce the average pressure delivered during the night.



---

 

Respiratory Care



Our aim is to provide respiratory care solutions to patients with from COPD and other chronic respiratory diseases, such as overlap syndrome, obesity hypoventilation syndrome, or OHS, and neuromuscular disease, including amyotrophic lateral sclerosis, or ALS.  We aim to improve their quality of life, slow down disease progression and reduce the costs of patient management.



Our products cover patients ranging from those who only require therapy from CPAP or VPAP systems at night, to those who are dependent on non-invasive or invasive ventilation for life-support and those who require portable oxygen concentrators (“POC”).  Our devices are predominantly used in the home and, to a lesser extent, in general hospital wards and respiratory wards. We supply CPAP and VPAP systems, non-invasive and invasive ventilators, humidifiers and accessories, including masks and tubing.  We also offer stationary and portable battery powered oxygen concentrators for the administration of long-term oxygen therapy in the home as well as data management systems designed to improve the management of patients.



Chronic Obstructive Pulmonary Disease. COPD encompasses a group of lung diseases defined by persistent airflow limitation, prolongation of exhalation and loss of elasticity in the lungs.  It is a progressive and debilitating disease and is associated with an increased inflammatory response in the airways.  Symptoms encountered with COPD include shortness of breath as well as chronic cough and increased sputum production. COPD includes diseases such as emphysema and chronic bronchitis.  A recent study based on recent epidemiology data estimates that there are approximately 380 million people worldwide who suffer from COPD.



Patients with COPD can have different clinical presentations.  Patients with chronic bronchitis present with low level of oxygen (hypoxemia) and elevated levels of carbon dioxide (hypercapnia), a chronic productive cough, cor pulmonale and are commonly overweight. Patients with emphysema have more normal blood gases, are usually thin and hyperinflated and have a decreased diffusion capacity.  During sleep, chronic bronchitic patients display more severe hypoxemia.  In general, the more hypoxic a COPD patient is during the day the more severe the hypoxemia experienced during sleep.  Hypercapnia as a consequence of hypoventilation also occurs in COPD patients and is more pronounced in REM sleep.  Some COPD patients may also suffer from co-morbid OSA, a condition known as Overlap Syndrome.



Home non-invasive ventilation has the potential to reduce healthcare costs associated with the management of patients with severe COPD by significantly increasing the time between hospital readmissions.



Overlap Syndrome. In patients with Overlap Syndrome, CPAP has been shown to provide benefits in relation to reducing mortality, decreasing hospitalizations and improving lung function and gas exchange.  Non-invasive ventilation, or NIV, has been demonstrated to improve outcomes in patients with acute exacerbations of COPD through its ability to improve respiratory acidosis and decrease dyspnea and work of breathing.  It may also increase survival rates and reduce length of hospital stays, as well as reducing complicating factors such as ventilator-associated pneumonia.  In patients with stable COPD the advantages of home NIV are less clear but clinical studies have shown improvements in dyspnea scores and health-related quality of life measures and reductions in hospital readmissions and intensive care stays.



Long-term oxygen therapy, or LTOT, is indicated in chronic respiratory failure patients.  The administration of LTOT has been shown to increase survival rates in patients with severe resting hypoxemia.  In hypoxemic COPD patients, LTOT is associated with a lower mortality compared to nocturnal oxygen therapy alone and also associated with improved health-related quality of life measures.  In long-term COPD survivors with a history of congestive heart failure, LTOT is associated with a slowing of respiratory failure progression.



Obesity Hypoventilation Syndrome.  OHS is characterized by the combination of obesity, chronic alveolar hypoventilation leading to daytime hypercapnia and hypoxia and SDB after the exclusion of other causes of alveolar hypoventilation. OHS is frequently associated with OSA with an estimated 90% of patients also having OSA.



In patients with OHS, positive airway therapy, both CPAP and NIV, has been shown to effectively treat upper airway obstruction and reverse daytime respiratory failure as well as reduce the work of breathing and improve respiratory drive.



---

 

Neuromuscular Disease. Neuromuscular disease is a broad term that encompasses many diseases that either directly (via intrinsic muscle pathology) or indirectly (via nerve pathology) impair the functioning of muscles. Symptoms of neuromuscular disease and respiratory failure include increasing generalized weakness and fatigue, dysphagia, dyspnoea on exertion and at rest, sleepiness, morning headache, difficulties with concentration and mood changes. Most neuromuscular diseases are characterized by progressive muscular impairment leading to loss of ambulation, being wheelchair-bound, swallowing difficulties, respiratory muscle weakness and, eventually, death from respiratory failure. Neuromuscular disorders can progress rapidly or slowly.  Rapidly progressive conditions, such as ALS and Duchenne muscular dystrophy in teenagers, are characterized by muscle impairment which worsens over months and can result in death within a few years.  Variable or slowly progressive conditions, such as Myotonic muscular dystrophy, are characterized by muscle impairment that worsens over years and may mildly reduce life expectancy.



NIV treatment to patients with neuromuscular disease may lead to improvements in respiratory failure symptoms and daytime arterial blood gases.  In ALS patients, NIV treatment has been associated with an improvement in quality of life measures, sleep-related symptoms and survival.  Studies have demonstrated that patients with Duchenne muscular dystrophy may improve in quality of life measures and may increase chance of survival with NIV treatment.



Business Strategy



We believe that the SDB and respiratory care markets will continue to grow in the future due to a number of factors, including increasing awareness of OSA, CSA and COPD, improved understanding of the role of SDB treatment in the management of cardiac, neurologic, metabolic and related disorders, improved understanding of the role of non-invasive ventilation in the management of COPD, and an increase in the use of digital and product technology to improve patient outcomes and create efficiencies for customers and providers. Our strategy for expanding our business operations and capitalizing on the growth of the SDB and respiratory care markets consists of the following key elements:

---

 



Products



Our portfolio of products includes devices, diagnostic products, mask systems, headgear and other accessories, dental devices, POCs and cloud-based software informatics solutions. For purposes of the following discussion, we refer to our air flow generators, ventilators and oxygen concentrators collectively as devices.



Devices



We produce CPAP, VPAP and AutoSet systems for the titration and treatment of SDB. The devices deliver positive airway pressure through a patient interface, either a small nasal mask, nasal pillows system, full-face mask or cannula.  Our VPAP units deliver ultra-quiet, comfortable bilevel therapy. AutoSet systems are based on a proprietary technology to monitor breathing and can also be used in the diagnosis, treatment and management of OSA. During fiscal year 2017, we launched AirMini, the smallest portable CPAP on the market today combining the same proven therapy modes used in the AirSense 10 with effective waterless humidification enabling portable convenience.



We also acquired a line of Chinese-developed and manufactured sleep and ventilation devices with the acquisition of Curative Medical.



Devices in total accounted for approximately 56%,  56% and 58% of our net revenues in fiscal years 2018, 2017 and 2016, respectively.



The tables below provide a selection of products, as known by our trademarks, which have been released during the last five years.







---

 











Mask Systems, Diagnostic Products, Accessories and Other Products



Masks, diagnostic products and accessories together accounted for approximately 38%,  37% and 40% of our net revenues in fiscal years 2018, 2017 and 2016, respectively.



---

 

Mask Systems and Diagnostic Products



Mask systems are one of the most important elements of SDB treatment systems. Masks are a primary determinant of patient comfort and as such may drive or impede patient compliance with therapy. We have been a consistent innovator in masks, improving patient comfort while minimizing size and weight.





We market sleep recorders for the diagnosis and titration of SDB in sleep clinics and hospitals. These diagnostic systems record relevant respiratory and sleep data, which can be analyzed by a sleep specialist or physician who can then tailor an appropriate OSA treatment regimen for the patient.





---

 

Accessories and Other Products



To enhance patient comfort, convenience and compliance, we market a variety of other products and accessories. These products include humidifiers, designed to help prevent the drying of nasal passages that can cause discomfort, carry bags and breathing circuits.  To assist those professionals diagnosing or managing the treatment of patients there are data communications and control products such as AirView Diagnostics, EasyCare, ResLink, ResControl, ResControl II, TxControl, ResScan and ResTraxx modules. With the introduction of our latest solutions we are expanding our use of cloud-based patient management and engagement platforms such as AirView enabling remote monitoring, over-the-air trouble shooting and changing of device settings, U-Sleep enabling automated patient coaching through a text, email or interactive voice phone call and myAir, a patient engagement application that provides sleep data and a daily score based on their previous night’s data. Following the acquisition of Brightree LLC in April 2016, our operations now include the supply of business management software and services to medical equipment and home health providers. This software-as-a-service, or SaaS, revenue accounted for approximately 7% of our net revenue in fiscal year 2018.





Product Development and Clinical Trials



We have a strong track record of innovation in the sleep and respiratory care markets. In 1989, we introduced our first CPAP device. Since then we have been committed to an ongoing program of product advancement and development. Currently, our product development and clinical trial efforts are focused on not only improving our current product offerings, but also expanding into new product applications.

 

We continually seek to identify new applications of our technology for significant unmet medical needs. SDB is associated with a number of symptoms beyond excessive daytime sleepiness and irritability. Studies have established a clinical association between SDB and hypertension, stroke, congestive heart failure and diabetes.



Across the sleep and respiratory care platforms, we support clinical trials in many countries including the United States, Germany, France, Japan, the United Kingdom, Switzerland, China, Spain, Canada, Singapore and Australia to develop new clinical applications for our technology. We have also begun presenting and publishing research findings based on the industry-leading connectivity platform and data assets that are unique to us.  We continue to support some of the largest SDB studies in history by performing advanced statistical analyses on hundreds of thousands of clinical data points.



We consult with physicians at major medical centers throughout the world to identify clinical and technological trends in the treatment of SDB, COPD and the other conditions associated with these diseases. New product ideas are also identified by our marketing staff, direct sales force and network of distributors, customers, clinicians and patients.



In fiscal years 2018, 2017 and 2016 we invested $155.1 million, $144.5 million and $118.7 million, respectively, on research and development.



---

 

Sales and Marketing



We currently market our products in more than 120 countries through a network of distributors and our direct sales force. We attempt to tailor our marketing approach to each national market, based on regional awareness of SDB as a health problem, physician referral patterns, consumer preferences and local reimbursement policies.  See Note 15 – Segment Information of the Notes to Consolidated Financial Statements (Part II, Item 8) for financial information about our geographic areas.



United States, Canada and Latin America.    Our products are typically purchased by a home healthcare dealer who then sells the products to the patient. The decision to purchase our products, as opposed to those of our competitors, is made or influenced by one or more of the following individuals or organizations: the prescribing physician and his or her staff; the home healthcare dealer; the insurer and the patient. In the United States, Canada and Latin America, our sales and marketing activities are conducted through a field sales organization made up of regional territory representatives, program development specialists and regional sales directors. Our field sales organization markets and sells products to home healthcare dealer branch locations throughout the United States, Canada and Latin America.



We also market our products directly to physicians and sleep clinics. Patients who are diagnosed with OSA or another respiratory condition and prescribed our products are typically referred by the diagnosing physician or sleep clinic to a home healthcare dealer to fill the prescription. The home healthcare dealer, in consultation with the referring physician, will assist the patient in selecting the equipment, fit the patient with the appropriate mask and set the device pressure to the prescribed level.



Sales in U.S., Canada and Latin America accounted for 62%,  63% and 61% of our net revenues for fiscal years 2018, 2017 and 2016,  respectively.



Combined Europe, Asia and other markets.    We market our products in most major countries in combined Europe, Asia and other markets. We have wholly-owned subsidiaries in Austria, Czech Republic, Denmark, Finland, France, Germany, Ireland, Netherlands, Norway, Poland, Sweden, Switzerland, the United Kingdom, Australia, China, India, Japan, Korea, New Zealand, and Taiwan.  We use a combination of our direct sales force and independent distributors to sell our products in combined Europe, Asia and other markets. We select independent distributors in each country based on their knowledge of respiratory medicine and a commitment to SDB therapy. In countries where we sell our products direct, a local senior manager is responsible for direct national sales. In many countries we sell our products to home healthcare dealers or hospitals who then sell the products to the patients. In Germany, Australia and New Zealand, we also operate a home healthcare company, in which we provide products and services directly to patients. 



Sales in combined Europe, Asia and other markets accounted for 38%, 37% and 39% of our total net revenues for fiscal years 2018, 2017 and 2016,  respectively. 



Market Growth Opportunities



We view the future of our business in sleep and respiratory disorders as having three horizons of growth supported by three key foundations.



Our three key foundations reach across all three of our horizons and include: first, our focus on people, leadership and culture; second, our global leadership in digital health and connected care, an important advancement in our product and solution offerings; and third, our focus on operating excellence and high efficiency via our global scale.



As we execute each horizon in our strategy, we intend to continue to expand into high growth geographic areas, including China, India, Eastern Europe, Brazil and Southeast Asia.



The first horizon includes our existing market in OSA treatment, where we believe our leadership in digital health and connected care is becoming an important distinguishing factor from our competitors. The use of technologies that allow remote collection and transfer of information through cloud-based computing is changing the current clinical pathways for following up with patients who use our devices, which we believe provides an opportunity to improve patient care and creates efficiencies for customers and providers. We plan to continue to invest and expand our capabilities in this area.



---

 

The second horizon includes the use of connected devices for the treatment of respiratory failure both in the hospital and the home.  We believe that COPD is a large and underpenetrated market where there are unmet patient needs as the global population with COPD continues to expand due to smoking and poor air quality.  Some patients with later-stage COPD may benefit from the use of ventilation at night, but until recently only a small number of COPD patients were treated using ventilation on a long-term basis. A study published in 2017 found that patients with stable but severe COPD using non-invasive ventilation nightly for six months experienced a reduction in mortality and an improvement in quality of life and exercise capacity.  The findings from this study and our associated marketing activities may result in an increase in the size of the homecare market for NIV.  In 2016, we expanded our product portfolio for the treatment of COPD with our acquisition of Inova Labs, a company that designs and manufactures POCs.  Many patients in earlier stages of COPD may require oxygen therapy and through the use of NIV and POC products they can receive this treatment in the home.  



Our third horizon focuses on a portfolio of new market options including sleep and consumer wellness, connected care expansion to continue to drive efficiency within the healthcare ecosystem and clinical areas of interest in adjacent markets like atrial fibrillation, heart failure and asthma.



We continue to approach this horizon by building a pipeline of growth options focusing on technology disruption of healthcare that will lead to value creation opportunities. We continue working with key opinion leaders in pulmonology, cardiology, neurology, and related clinical areas. A growing body of literature documents the association and interactions between a number of cardiac diseases and SDB. OSA is the most common secondary cause of hypertension and is prevalent in hypertensive populations, particularly those resistant to therapy. Treatment with CPAP tends to lower blood pressure. OSA is prevalent in those with atrial fibrillation and may trigger episodes of fibrillation. Treatment with CPAP appears to improve outcomes.  OSA is also known to be a strong risk factor for the development of acute coronary disease and cardiovascular disease in general. Heart failure is also commonly associated with both OSA and CSA, and both forms of SDB are risk factors for poor outcomes. We are undertaking several clinical trials in cardiology to strengthen the knowledge base on the effects of SDB therapy on outcomes.  In addition to clinical trials we pursue suitable opportunities with professional and healthcare associations to raise awareness of the importance of SDB in cardiology patients. 



We are also working with occupational health professionals to raise awareness of the issues caused by untreated OSA in the workplace including accidents, absenteeism and reduced productivity, plus increased costs for employers who provide healthcare coverage for employees.



We continue to provide research funding in these strategic areas while at the same time providing educational support to physicians working within these various specialties. We believe that the increasing awareness among physicians supports the efforts and investment we are making in new markets.



Manufacturing



We operate a globally distributed manufacturing network designed for supply chain resilience, and that is intended to control costs and minimize risks. Our manufacturing operations consist of specialist component production as well as assembly and testing of our devices, masks and accessories. Of the numerous raw materials, parts and components purchased for assembly of our therapeutic and diagnostic sleep disorder products, many are off-the-shelf items available from multiple vendors. We also purchase uniquely configured components from various suppliers, including some who are single-source suppliers for us.  Any reduction or halt in supply from one of these single-source suppliers could limit our ability to manufacture our products or devices until a replacement supplier is found and qualified. We generally manufacture to our internal sales forecasts and fill orders as received. We strive for continuous improvement in manufacturing processes to deliver year-on-year improvement in output, cost and product quality. Each manufacturing site and team are responsible for the quality of their product group and decisions are based on performance and quality measures, including customer feedback.



Our quality management system is based upon the requirements of ISO 9001, ISO 13485, FDA Quality System Regulations for Medical Devices, the Medical Device Directive (93/42/EEC) and other applicable regulations for the markets in which we sell.  Our main manufacturing sites are certified to ISO 13485 and audited at regular intervals by a Notified Body. Additionally, our Sydney, Loyang, San Diego, Atlanta and Moreno Valley sites are certified under the Medical Device Single Audit Program or MDSAP, an audit of medical device manufacturers’ quality management system to satisfy multiple regulatory requirements. MDSAP audits are conducted by a MDSAP recognized auditing organization and can fulfill the needs of multiple regulatory jurisdictions (i.e. Australia, Brazil, Canada, Japan, and the United States of America).



Our main manufacturing facilities are located in Sydney, Australia; Loyang, Singapore; Chatsworth, California; Johor Bahru, Malaysia; Atlanta, Georgia and Suzhou, China. Refer to Item 2 for additional details on these properties.



---

 

Third-Party Coverage and Reimbursement



The cost of medical care in many of the countries in which we operate is funded in substantial part by government and private insurance programs. In Germany, we receive payments directly from these payors. Outside Germany, although we do not generally receive payments for our products directly from these payors, our success in major markets depends on the ability of patients to obtain coverage and adequate reimbursement from third-party payors for our products.



In the United States, our products are purchased primarily by home healthcare dealers, hospitals or sleep clinics, who invoice third-party payors directly for reimbursement. Domestic third-party payors include government payors such as Medicare and Medicaid and commercial health insurance plans. These payors may deny coverage and reimbursement if they determine that a device is not used in accordance with certain covered treatment methods, or is experimental, unnecessary or inappropriate. The long-term trend towards cost-containment, through managed healthcare, or other legislative proposals to reform healthcare, could control or significantly influence the purchase of healthcare services and products and could result in lower prices for our products.  In some foreign markets, such as France, Germany and Japan, government reimbursement is currently available for purchase or rental of our products, subject to constraints such as price controls or unit sales limitations.  In Australia, China, and in some other foreign markets, there is currently limited or no reimbursement for devices that treat OSA.



The past decade of legislative reform in the United States, including, by way of example, the 2010 Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act (collectively, the ACA), Medicare Improvement for Patients and Providers Act of 2008, Deficit Reduction Act of 2005, the Medicare Prescription Drug, Improvement, and Modernization Act of 2003, or the MMA, and the 21st Century Cures Act has significantly impacted government reimbursement for products that we provide.  The longer term impact, though not entirely predictable, continues to bring significant changes to the third-party payor landscape. 



Beginning in 2005, the MMA established a Medicare competitive acquisition program for home medical equipment, or HME, and imposed quality standards and accreditation requirements for HME suppliers. The Centers for Medicare & Medicaid Services, or CMS, implemented the competitive bidding program beginning in 2011, and included HME that we manufacture and develop, specifically, oxygen CPAP and respiratory assist devices, and related supplies and accessories. CMS is required by law to recompete these contracts at least once every three years. In addition, the ACA required CMS to roll out the competitive bidding process nationally or adjust prices in non-competitive bidding areas, also known as the non-bid or Round 3 areas, to match competitive bidding prices by 2016.  CMS phased in the new rates beginning January 1, 2016, and the rates became fully effective July 1, 2016. As a result of the national rollout, Medicare payment for CPAP devices in non-competitive bidding areas was reduced by approximately 60% in urban areas and approximately 56% in rural areas, as compared to the Medicare payment rates that were effective in 2015. The implementation of the competitive acquisition program has resulted in reduced Medicare payment for oxygen CPAP and respiratory assist devices, and related supplies and accessories in both competitive bidding areas and non-competitive bidding areas.



On December 13, 2016, the 21st Century Cures Act was signed into law, which retroactively adjusted rates in non-bid areas to allow for higher phase-in rates to be paid for items furnished between July 1, 2016 and December 31, 2016, rather than the lower fully-adjusted rates. An Interim Final Rule was recently issued by CMS resuming the higher phase-in rates in rural and non-contiguous non-competitive bidding areas for items furnished between June 1, 2018 and December 31, 2018. A proposed rule released by Medicare on July 11, 2018 would, if finalized, suspend the competitive bidding program for 2019 and possibly 2020 as they finalize a new auction methodology using clearing price and lead item pricing. They propose holding reimbursements steady in the interim, including continuing the higher blended phase-in rates established in the interim rule.



The ACA, which was passed both to expand the number of individuals with healthcare coverage and to develop additional revenue sources, also included, among other things, a deductible excise tax equal to 2.3% of the price for which medical devices are sold in the United States on any entity that manufactures or imports medical devices, with limited exceptions, beginning in 2013. However, this excise tax was subsequently suspended by the U.S. Congress for medical device sales during calendar years 2016 and 2019.  If this excise tax had not been suspended it would be applicable to our products that are primarily used in hospitals and sleep labs, which includes the ApneaLink Air, VPAP Tx, and certain respiratory care and dental sleep products.  Absent further Congressional action, this excise tax will be reinstated for medical device sales beginning January 1, 2020.  The ACA also provided for a number of Medicare regulatory requirements, including new face-to-face encounter requirements for durable medical equipment and home health services.



---

 

We cannot predict at this time the full impact that the ACA, or any U.S. legislation enacted in the future, will have on our revenues, profit margins, profitability, operating cash flows and results of operations. There have been judicial and Congressional challenges to certain aspects of the ACA, as well as recent efforts by the Trump administration to repeal or replace certain aspects of the ACA, and we expect such challenges and amendments to continue. For example, the Tax Cuts and Jobs Act of 2017 includes a provision repealing, effective January 1, 2019, the tax-based shared responsibility payment imposed by the ACA on certain individuals who fail to maintain qualifying health coverage for all or part of a year that is commonly referred to as the “individual mandate.” The administration and the U.S. Congress may take further action regarding the ACA, including, but not limited to, repeal or replacement. Additionally, all or a portion of the ACA and related subsequent legislation may be modified, repealed or otherwise invalidated through judicial challenge.



Service and Warranty



We generally offer either one-year or two-year limited warranties on our devices. Warranties on mask systems are for 90 days.  Our distributors either repair our products with parts supplied by us or arrange shipment of products to our facilities for repair or replacement.



We receive returns of our products from the field for various reasons. We believe that the level of returns experienced to date is consistent with levels typically experienced by manufacturers of similar devices. We provide for warranties and returns based on historical data.



Competition



The markets for our products are highly competitive. We believe that the principal competitive factors in all of our markets are product features, value-added solutions, reliability and price. Customer support, reputation and efficient distribution are also important factors.



We compete on a market-by-market basis with various companies, some of which have greater financial, research, manufacturing and marketing resources than us. Our primary competitors include Philips BV; Fisher & Paykel Healthcare Corporation Limited; DeVilbiss Healthcare; Apex Medical Corporation; BMC Medical Co. Ltd.; and regional manufacturers. The disparity between our resources and those of our competitors may increase as a result of the trend towards consolidation in the healthcare industry. In addition, some of our competitors, such as Löwenstein Medical GmbH + Co. KG, are affiliates of customers of ours, which may make it difficult to compete with them. Finally, our products compete with surgical procedures and dental appliances designed to treat OSA and other SDB-related respiratory conditions. The development of new or innovative procedures or devices by others could result in our products becoming obsolete or noncompetitive, which would harm our revenues and financial condition.



Any product developed by us that gains regulatory clearance will have to compete for market acceptance and market share. An important factor in such competition may be the timing of market introduction of competitive products. Accordingly, the speed with which we can develop products, complete clinical testing and regulatory clearance processes and supply commercial quantities of the product to the market are important competitive factors. In addition, our ability to compete will continue to be dependent on successfully protecting our patents and other intellectual property.



Patents and Proprietary Rights and Related Litigation



We rely on a combination of patents, trade secrets, copyrights, trademarks and non-disclosure agreements to protect our proprietary technology and rights.



Through our various subsidiaries, as of the date of this report, we own or have licensed rights to approximately 1,166 issued U.S. patents (including approximately 437 design patents) and approximately 2,123 issued foreign patents. In addition, there are approximately 454 pending U.S. patent applications (including approximately 34 design patent applications), approximately 910 pending foreign patent applications, approximately 995 registered foreign designs and 37 pending foreign designs. Some of these patents, patent applications and designs relate to significant aspects and features of our products.



Of our patents, 213 U.S. patents and 512 foreign patents are due to expire in the next five years. There are 50 foreign patents due to expire in 2019, 128 in 2020, 78 in 2021, 117 in 2022, and 139 in 2023. There are 16 U.S. patents due to expire in 2019, 74 U.S. patents due to expire in 2020, 35 U.S. patents due to expire in 2021, 49 U.S. patents due to expire in 2022, and 39 U.S. patents due to expire in 2023. We believe that the expiration of these patents will not have a material adverse impact on our competitive position. 



---

 

Litigation has been necessary in the past and may be necessary in the future to enforce patents issued to us, to protect our rights, or to defend third-party claims of infringement by us of the proprietary rights of others. The defense and prosecution of patent claims, including pending claims, as well as participation in other inter-party proceedings, can be expensive and time-consuming, even in those instances in which the outcome is favorable to us. Patent laws regarding the enforceability of patents vary from country to country. Therefore, there can be no assurance that patent issues will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.



Government Regulations



FDA



Our products are subject to extensive regulation particularly as to safety, efficacy and adherence to FDA Quality System Regulation, and related manufacturing standards. Medical device products are subject to rigorous FDA and other governmental agency regulations in the United States and similar regulations of foreign agencies abroad. The FDA regulates the design, development, research, preclinical and clinical testing, introduction, manufacture, advertising, labeling, packaging, marketing, distribution, import and export, and record keeping for such products, in order to ensure that medical products distributed in the United States are safe and effective for their intended use. In addition, the FDA is authorized to establish special controls to provide reasonable assurance of the safety and effectiveness of most devices. Non-compliance with applicable requirements can result in import detentions, fines, civil and administrative penalties, injunctions, suspensions or losses of regulatory approvals, recall or seizure of products, operating restrictions, refusal of the government to approve product export applications or allow us to enter into supply contracts, and criminal prosecution.



Unless an exemption applies, the FDA requires that a manufacturer introducing a new medical device or a new indication for use of an existing medical device obtain either a Section 510(k) premarket notification clearance or a premarket approval, or PMA, before introducing it into the U.S. market. The type of marketing authorization is generally linked to the classification of the device.   The FDA classifies medical devices into one of three classes (Class I, II or III) based on the degree of risk the FDA determines to be associated with a device and the level of regulatory control deemed necessary to ensure the device’s safety and effectiveness.



Our products currently marketed in the United States are marketed pursuant to 510(k) pre-marketing clearances and are either Class I or Class II devices. The process of obtaining a Section 510(k) clearance generally requires the submission of performance data and often clinical data, which in some cases can be extensive, to demonstrate that the device is “substantially equivalent” to a device that was on the market before 1976 or to a device that has been found by the FDA to be “substantially equivalent” to such a pre-1976 device, a predecessor device is referred to as “predicate device.” As a result, FDA clearance requirements may extend the development process for a considerable length of time. In addition, in some cases, the FDA may require additional review by an advisory panel, which can further lengthen the process. The PMA process, which is reserved for new devices that are not substantially equivalent to any predicate device and for high-risk devices or those that are used to support or sustain human life, may take several years and requires the submission of extensive performance and clinical information.



Medical devices can be marketed only for the indications for which they are cleared or approved.  After a device has received 510(k) clearance for a specific intended use, any change or modification that significantly affects its safety or effectiveness, such as a significant change in the design, materials, method of manufacture or intended use, may require a new 510(k) clearance or PMA approval and payment of an FDA user fee.  The determination as to whether or not a modification could significantly affect the device’s safety or effectiveness is initially left to the manufacturer using available FDA guidance; however, the FDA may review this determination to evaluate the regulatory status of the modified product at any time and may require the manufacturer to cease marketing and recall the modified device until 510(k) clearance or PMA approval is obtained.  The manufacturer may also be subject to significant regulatory fines or penalties.  The FDA recently reviewed its guidance describing when it believes a manufacturer is obligated to submit a new 510(k) for modifications or changes to a previously cleared device and determined that manufacturers should continue adhering to the 1997 guidance on this topic.  In October 2017, the FDA issued guidance that it believes preserves the basic content and format of the 1997 guidance, with updates to add clarity. 



---

 

Any devices we manufacture and distribute pursuant to clearance or approval by the FDA are subject to pervasive and continuing regulation by the FDA and certain state agencies.  These include product listing and establishment registration requirements, which help facilitate FDA inspections and other regulatory actions.  As a medical device manufacturer, all of our manufacturing facilities are subject to inspection on a routine basis by the FDA. We are required to adhere to applicable regulations setting forth detailed cGMP requirements, as set forth in the QSR, which require, manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all phases of the design and manufacturing process. Noncompliance with these standards can result in, among other things, fines, injunctions, civil penalties, recalls or seizures of products, total or partial suspension of production, refusal of the government to grant 510(k) clearance or PMA approval of devices, withdrawal of marketing approvals and criminal prosecutions. We believe that our design, manufacturing and quality control procedures are in compliance with the FDA’s regulatory requirements.



We must also comply with post-market surveillance regulations, including medical device reporting, or MDR, requirements which require that we review and report to the FDA any incident in which our products may have caused or contributed to a death or serious injury. We must also report any incident in which our product has malfunctioned if that malfunction would likely cause or contribute to a death or serious injury if it were to recur.



Labeling and promotional activities are subject to scrutiny by the FDA and, in certain circumstances, by the Federal Trade Commission. Medical devices approved or cleared by the FDA may not be promoted for unapproved or uncleared uses, otherwise known as “off-label” promotion. The FDA and other agencies actively enforce the laws and regulations prohibiting the promotion of off-label uses, and a company that is found to have improperly promoted off-label uses may be subject to significant liability, including substantial monetary penalties and criminal prosecution.



Sales of medical devices outside the United States are subject to regulatory requirements that vary widely from country to country. 



EEA



In the European Economic Area, (which is comprised of the 28 Member States of the European Union plus Norway, Iceland and Liechtenstein), or EEA, manufacturers of medical devices need to comply with the Essential Requirements laid out in Annex I to the EU Medical Devices Directive (Council Directive 93/42/EEC). Compliance with these requirements is a prerequisite to be able to affix the CE mark to medical devices, without which they cannot be marketed or sold in the EEA. To demonstrate compliance with the Essential Requirements and obtain the right to affix the CE Mark, manufacturers of medical devices must undergo a conformity assessment procedure, which varies according to the type of medical device and its classification. Except for low-risk medical devices (Class I with no measuring function and which are not sterile), where the manufacturer can issue an EC Declaration of Conformity based on a self-assessment of the conformity of its products with the Essential Requirements, a conformity assessment procedure requires the intervention of a Notified Body, which is an organization designated by a competent authority of an EEA country to conduct conformity assessments. Depending on the relevant conformity assessment procedure, the Notified Body would audit and examine the Technical File and the quality system for the manufacture, design and final inspection of the devices. The Notified Body issues a CE Certificate of Conformity following successful completion of a conformity assessment procedure conducted in relation to the medical device and its manufacturer and their conformity with the Essential Requirements. This Certificate entitles the manufacturer to affix the CE mark to its medical devices after having prepared and signed a related EC Declaration of Conformity.



As a general rule, demonstration of conformity of medical devices and their manufacturers with the essential requirements must be based, among other things, on the evaluation of clinical data supporting the safety and performance of the products during normal conditions of use. Specifically, a manufacturer must demonstrate that the device achieves its intended performance during normal conditions of use, that the known and foreseeable risks, and any adverse events, are minimized and acceptable when weighed against the benefits of its intended performance, and that any claims made about the performance and safety of the device are supported by suitable evidence.



All manufacturers placing medical devices into the market in the EEA must comply with the EU Medical Device Vigilance System. Under this system, incidents must be reported to the relevant authorities of the Member States of the EEA, and manufacturers are required to take Field Safety Corrective Actions, or FSCAs, to reduce a risk of death or serious deterioration in the state of health associated with the use of a medical device that is already placed on the market. An incident is defined as any malfunction or deterioration in the characteristics and/or performance of a device, as well as any inadequacy in the labeling or the instructions for use which, directly or indirectly, might lead to or might have led to the death of a patient or user or of other persons or to a serious deterioration in their state of health. An FSCA may include the recall, modification, exchange, destruction or retrofitting of the device. FSCAs must be communicated by the manufacturer or its legal representative to its customers and/or to the end users of the device through Field Safety Notices.



---

 

Where appropriate, our products commercialized in Europe are CE marked and classified as either Class I or Class II. 



On April 5, 2017, the European Parliament passed the Medical Devices Regulation, which repeals and replaces the EU Medical Devices Directive. Unlike directives, which must be implemented into the national laws of the EEA member States, the regulations would be directly applicable (i.e., without the need for adoption of EEA member State laws implementing them) in all EEA member States and are intended to eliminate current differences in the regulation of medical devices among EEA member States. The Medical Devices Regulation, among other things, is intended to establish a uniform, transparent, predictable and sustainable regulatory framework across the EEA for medical devices and in vitro diagnostic devices and ensure a high level of safety and health while supporting innovation.



The Medical Devices Regulation will however only become applicable three years after publication in May 2020. Once applicable, the new regulations will among other things:



These modifications may have an impact on the way we design and manufacture products and the way we conduct our business in the EEA. We are progressing in our plans to meet the new requirements.



Other regulatory bodies



Our devices are sold in multiple countries and often need to be registered with local regulatory bodies such as the Therapeutic Goods Administration in Australia, Health Canada in Canada and CFDA in China.



Other Healthcare Laws



We are subject to a number of laws and regulations that may restrict our business practices, including, without limitation, anti-kickback, false claims, physician payment transparency and data privacy and security laws.  The government has interpreted these laws broadly to apply to the marketing and sales activities of manufacturers and distributors like us.



The federal Anti-Kickback Statute prohibits, among other things, persons or entities from knowingly and willfully soliciting, receiving, offering or providing remuneration, directly or indirectly, in cash or in kind, in exchange for or to induce either the referral of an individual for, or the purchase, lease, order or recommendation of, any good, facility, item or service for which payment may be made, in whole or in part, under federal healthcare programs such as Medicare and Medicaid.  In addition, a claim including items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal civil False Claims Act. Violations of the federal Anti-Kickback Statute may result in civil monetary penalties up to $74,792 for each violation, plus up to three times the remuneration involved. Violations of the Federal Anti-Kickback Statute can also result in criminal penalties, including criminal fines of up to $100,000 and imprisonment of up to 10 years. In addition, violations can result in exclusion from participation in government healthcare programs, including Medicare and Medicaid.



The federal civil False Claims Act prohibits, among other things, any person or entity from knowingly presenting, or causing to be presented, a false or fraudulent claim for payment or approval to the federal government or knowingly making, using or causing to be made or used a false record or statement material to a false or fraudulent claim to the federal government. A claim includes “any request or demand” for money or property presented to the U.S. government. The civil False Claims Act also applies to false submissions that cause the government to be paid less than the amount to which it is entitled, such as a rebate. Intent to deceive is not required to establish liability under the civil False Claims Act. When an entity is determined to have violated the federal civil False Claims Act, the government may impose civil fines and penalties ranging from $11,181 to $22,363 for each false claim, plus treble damages, and exclude the entity from participation in Medicare, Medicaid and other federal healthcare programs. Private suits filed under the civil False Claims Act, known as qui tam actions, can be brought by individuals on behalf of the government. These individuals may share in any amounts paid by the entity to the government in fines or settlement.



---

 

The federal Civil Monetary Penalties Law prohibits, among other things, the offering or transfer of remuneration to a Medicare or state healthcare program beneficiary if the person knows or should know it is likely to influence the beneficiary’s selection of a particular provider, practitioner, or supplier of services reimbursable by Medicare or a state healthcare program, unless an exception applies.



The federal Physician Sunshine Act, which requires certain manufacturers of drugs, biologicals, and medical devices or supplies that require premarket approval by or notification to the FDA, and for which payment is available under Medicare, Medicaid or the Children’s Health Insurance Program, to report annually to the Centers for Medicare and Medicaid Services, or CMS, information related to (i) payments and other transfers of value to physicians and teaching hospitals, and (ii) ownership and investment interests held by physicians and their immediate family members. Applicable manufacturers are required to submit annual reports to CMS. Failure to submit required information may result in civil monetary penalties of $11,052 per failure up to an aggregate of $165,786 per year (or up to an aggregate of $1.105 million per year for “knowing failures”), for all payments, transfers of value or ownership or investment interests that are not timely, accurately, and completely reported in an annual submission, and may result in liability under other federal laws or regulations. Certain states also mandate implementation of commercial compliance programs, impose restrictions on device manufacturer marketing practices and/or require the tracking and reporting of gifts, compensation and other remuneration to healthcare professionals and entities.



The federal Health Insurance Portability and Accountability Act of 1996, or HIPAA, created federal criminal statutes that prohibit among other actions, knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program, including private third-party payors, knowingly and willfully embezzling or stealing from a healthcare benefit program, willfully obstructing a criminal investigation of a healthcare offense, and knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. Like the Anti-Kickback Statute, a person or entity does not need to have actual knowledge of these statutes or specific intent to violate them in order to have committed a violation.



Also, many U.S. states and countries outside the U.S. have similar fraud and abuse statutes or regulations that may be broader in scope and may apply regardless of payor, in addition to items and services reimbursed under government programs.



Under HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, or HITECH, which we collectively refer to as HIPAA, the Department of Health and Human Services, or HHS, has issued regulations, including the HIPAA Privacy, Security and Breach Notification Rules, to protect the privacy and security of protected health information, or PHI, used or disclosed by covered entities including health care providers and their business associates. HIPAA also regulates standardization of data content, codes and formats used in health care transactions and standardization of identifiers for health plans and providers. Penalties for violations of HIPAA regulations include civil and criminal penalties. In addition to federal privacy and security regulations, there are a number of state laws governing confidentiality and security of health information that are applicable to our business. New laws governing privacy may be adopted in the future as well. Further, failure to comply with the HIPAA privacy and security standards can result in civil monetary penalties up to $55,910 per violation, not to exceed $1.68 million per calendar year for non-compliance of an identical provision and, in certain circumstances, criminal penalties with fines up to $250,000 and/or imprisonment, which could have a materially adverse effect on our business.



In some of our operations, such as those involving our cloud-based software digital health applications, we are a business associate under HIPAA and therefore required to comply with the HIPAA Security Rule, Breach Notification Rule and certain provisions of the HIPAA Privacy Rule, and are subject to significant civil and criminal penalties for failure to do so.



In addition, as of May 25, 2018, the General Data Protection Regulation, or GDPR, has replaced the Data Protection Directive with respect to the processing of personal data in the European Union. The GDPR imposes several stringent requirements for controllers and processors of personal data, including, for example, higher standards for obtaining consent from individuals to process their personal data, more robust disclosures to individuals and a strengthened individual data rights regime, shortened timelines for data breach notifications, limitations on retention and secondary use of information, increased requirements pertaining to health data and pseudonymised (i.e., key-coded) data and additional obligations when we contract third party processors in connection with the processing of the personal data. The GDPR provides that EU member states may make their own further laws and regulations limiting the processing of genetic, biometric or health data, which could limit our ability to use and share personal data or could cause our costs could increase, and harm our business and financial condition. Failure to comply with the requirements of GDPR and the applicable national data protection laws of the EU member states may result in fines of up to €20,000,000 or up to 4% of the total worldwide annual turnover of the preceding financial year, whichever is higher, and other administrative penalties. To comply with the new data protection rules imposed by GDPR we may be required to put in place additional mechanisms ensuring compliance. This may be onerous and adversely affect our business, financial condition, results of operations and prospects.



---

 

European data protection law also imposes strict rules on the transfer of personal data out of the EU, including to the United States. These obligations may be interpreted and applied in a manner that is inconsistent from one jurisdiction to another and may conflict with other requirements or our practices. In addition, these rules are constantly under scrutiny. For example, following a decision of the Court of Justice of the European Union in October 2015, transferring personal data to U.S. companies that had certified as members of the U.S. Safe Harbor Scheme was declared invalid. In July 2016 the European Commission adopted the U.S.-EU Privacy Shield Framework which replaces the Safe Harbor Scheme. However, this Framework is under review and there is currently litigation challenging other EU mechanisms for adequate data transfers (i.e., the standard contractual clauses). It is uncertain whether the Privacy Shield Framework and/or the standard contractual clauses will be similarly invalidated by the European courts. We rely on a mixture of mechanisms to transfer personal data from our EU business to the U.S., and could be impacted by changes in law as a result of a future review of these transfer mechanisms by European regulators under the GDPR, as well as current challenges to these mechanisms in the European courts.



Numerous other state, federal and foreign laws, including consumer protection laws and regulations, govern the collection, dissemination, use, access to, confidentiality and security of patient health information. In addition, Congress and some states are considering new laws and regulations that further protect the privacy and security of medical records or medical information. With the recent increase in publicity regarding data breaches resulting in improper dissemination of consumer information, many states have passed laws regulating the actions that a business must take if it experiences a data breach, such as prompt disclosure to affected customers. Generally, these laws are limited to electronic data and make some exemptions for smaller breaches. Congress has also been considering similar federal legislation relating to data breaches. The Federal Trade Commission, or FTC, and states’ Attorneys General have also brought enforcement actions and prosecuted some data breach cases as unfair and/or deceptive acts or practices under the FTC Act. In addition to data breach notification laws, some states have enacted statutes and rules requiring businesses to reasonably protect certain types of personal information they hold or to otherwise comply with certain specified data security requirements for personal information. These laws may apply directly to our business or indirectly by contract when we provide services to other companies. We intend to continue to comprehensively protect all personal information and to comply with all applicable laws regarding the protection of such information.



Additionally, there has been a recent trend of increased federal and state regulation of payments and transfers of value provided to healthcare professionals or entities.



The shifting commercial compliance environment and the need to build and maintain robust systems to comply with different compliance or reporting requirements in multiple jurisdictions increase the possibility that a healthcare company may fail to comply fully with one or more of these requirements.  If our operations are found to be in violation of any of the health regulatory laws described above or any other laws that apply to us, we may be subject to penalties, including potentially significant criminal and civil and administrative penalties, damages, fines, disgorgement, imprisonment, exclusion from participation in government healthcare programs, contractual damages, reputational harm, administrative burdens, diminished profits and future earnings, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our results of operations.



Employees



As of June 30, 2018, we had approximately 5,940 employees or full-time consultants, of which approximately 2,490 were employed in cost of sales activities including areas such as warehousing and manufacturing,  930 in research and development and 2,520 in sales, marketing and administration. Of our employees and consultants, approximately 1,850 were located in U.S., Canada and Latin America, 1,380 in Australia, 1,260 in Europe and 1,450 in Asia. 



We believe that the success of our business will depend, in part, on our ability to attract and retain qualified personnel.

 



 

---

 

ITEM 1A  RISK FACTORS



Before deciding to purchase, hold or sell our common stock, you should carefully consider the risks described below in addition to the other cautionary statements and risks described elsewhere, and the other information contained, in this Report and in our other filings with the SEC, including our subsequent reports on Forms 10-Q and 8-K. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also affect our business. If any of these known or unknown risks or uncertainties actually occurs with material adverse effects on us, our business, financial condition and results of operations could be seriously harmed. In that event, the market price for our common stock will likely decline, and you may lose all or part of your investment.



Our inability to compete successfully in our markets may harm our business. The markets for our SDB products are highly competitive and are characterized by frequent product improvements and evolving technology. Our ability to compete successfully depends, in part, on our ability to develop, manufacture and market innovative new products. The development of innovative new products by our competitors or the discovery of alternative treatments or potential cures for the conditions that our products treat could make our products noncompetitive or obsolete.  Current competitors, new entrants, academics, and others are trying to develop new devices, alternative treatments or cures, and pharmaceutical solutions to the conditions our products treat.



Additionally, some of our competitors have greater financial, research and development, manufacturing and marketing resources than we do. The past several years have seen a trend towards consolidation in the healthcare industry and in the markets for our products. Industry consolidation could result in greater competition if our competitors combine their resources, if our competitors are acquired by other companies with greater resources than ours, or if our competitors become affiliated with customers of ours. This competition could increase pressure on us to reduce the selling prices of our products or could cause us to increase our spending on research and development and sales and marketing. If we are unable to develop innovative new products, maintain competitive pricing, and offer products that consumers perceive to be as good as those of our competitors, our sales or gross margins could decrease which would harm our business.



Our business depends on our ability to market effectively to dealers of home healthcare products and sleep clinics.  We market our products primarily to home healthcare dealers and to sleep clinics that diagnose OSA and other sleep disorders, as well as to non-sleep specialist physician practices that diagnose and treat sleep disorders. We believe that these groups play a significant role in determining which brand of product a patient will use. The success of our business depends on our ability to market effectively to these groups to ensure that our products are properly marketed and sold by these third-parties.



We have limited resources to market to the sleep clinics, home healthcare dealer branch locations and to the non-sleep specialists, most of whom use, sell or recommend several brands of products. In addition, home healthcare dealers have experienced price pressures as government and third-party reimbursement has declined for home healthcare products, and home healthcare dealers are requiring price discounts and longer periods of time to pay for products purchased from us. We cannot assure you that physicians will continue to prescribe our products, or that home healthcare dealers or patients will not substitute competing products when a prescription specifying our products has been written.



We have expanded our marketing activities in some markets to target the population with a predisposition to sleep-disordered breathing as well as primary care physicians and various medical specialists. We cannot assure you that these marketing efforts will be successful in increasing awareness or sales of our products.



Consolidation in the health care industry could have an adverse effect on our revenues and results of operations.  Many home health care dealers are consolidating, which may result in greater concentration of market power. As the health care industry consolidates, competition to provide goods and services to industry participants may become more intense. These industry participants may try to use their market power to negotiate price concessions or reductions for medical devices and components produced by us. If we are forced to reduce our prices because of consolidation in the health care industry, our revenues may decrease and our consolidated earnings, financial condition, and/or cash flows may suffer.



If we are unable to support our continued growth, our business could suffer.  As we continue to grow, the complexity of our operations increases, placing greater demands on our management. Our ability to manage our growth effectively depends on our ability to implement and improve our financial and management information systems on a timely basis and to effect other changes in our business including, the ability to monitor and improve manufacturing systems, information technology, and quality and regulatory compliance systems, among others. Unexpected difficulties during expansion, the failure to attract and retain qualified employees, the failure to successfully replace or upgrade our management information systems, the failure to manage costs or our inability to respond effectively to growth or plan for future expansion could cause our growth to stop. If we fail to manage our growth effectively and efficiently, our costs could increase faster than our revenues and our business results could suffer.

---

 



If we fail to integrate our acquisitions with our operations, our business could suffer.  Part of our growth strategy includes acquiring businesses consistent with our commitment to innovation in developing products for the diagnosis and treatment of SDB and respiratory care as well as our SaaS business. The success of our acquisitions will depend, in part, on our ability to successfully integrate the business and operations of the acquired companies.  Additionally, our management may have their attention diverted while trying to integrate these businesses. If we are not able to successfully integrate the operations, we may not realize the anticipated benefits of the acquisitions fully or at all, or may take longer to realize than expected.



We are subject to various risks relating to international activities that could affect our overall profitability.  We manufacture substantially all of our products outside the United States and sell a significant portion of our products in non-U.S. markets.    Sales in combined Europe, Asia and other markets accounted for approximately 38% and 37% of our net revenues in the years ended June 30, 2018 and June 30, 2017 respectively. We expect that sales within these areas will account for approximately 35% to 40% of our net revenues in the foreseeable future. Our sales and operations outside of the U.S. are subject to several difficulties and risks that are separate and distinct from those we face in the U.S., including:



Any of the above factors may have a material adverse effect on our ability to increase or maintain our non-U.S. sales.

 

Government and private insurance plans may not adequately reimburse our customers for our products, which could result in reductions in sales or selling prices for our products.  Our ability to sell our products depends in large part on the extent to which coverage and adequate reimbursement for our products will be available from government health administration authorities, private health insurers and other organizations. These third-party payers are increasingly challenging the prices charged for medical products and services and can, without notice, deny coverage for our products or treatments that may include the use of our products. Therefore, even if a product is approved for marketing, we cannot make assurances that coverage and reimbursement will be available for the product, that the reimbursement amount will be adequate or that the reimbursement amount, even if initially adequate, will not be subsequently reduced. For example, in some markets, such as Spain, France and Germany, government coverage and reimbursement are currently available for the purchase or rental of our products but are subject to constraints such as price controls or unit sales limitations. In other markets, such as Australia, there is currently limited or no reimbursement for devices that treat SDB conditions. As we continue to develop new products, those products will generally not qualify for coverage and reimbursement until they are approved for marketing, if at all.



In the United States, we sell our products primarily to home healthcare dealers, hospitals and sleep clinics. Reductions in reimbursement to our customers by third-party payers, if they occur, may have a material impact on our customers and, therefore, may indirectly affect our pricing and sales to, or the collectability of receivables we have from, those customers. A development negatively affecting reimbursement stems from the Medicare competitive bidding program mandated by the MMA.  Under the program, our customers who provide home healthcare services must compete to offer products in designated competitive bidding areas, or CBAs. In addition, under the ACA, in 2016, CMS adjusted the prices in non-competitive bidding areas to match competitive bidding prices. CMS phased in the new rates beginning January 1, 2016, and were fully effective July 1, 2016.  This program has significantly reduced the Medicare reimbursement to our customers compared with reimbursement in 2011, at the beginning of the program.  Similarly, provisions of the 21st Century Cures Act were signed into law, which retroactively adjusted rates in non-bid areas to allow for the higher phase-in rates to be paid for items furnished between July 1, 2016 and December 31, 2016, rather than the lower fully-adjusted rates. An Interim Final Rule was recently issued by CMS resuming the higher phase-in rates in rural and non-contiguous non-competitive bidding areas for items furnished between June 1, 2018 and December 31, 2018. If changes are made to this law in the future, it could affect amounts being recovered by our customers.



---

 

We cannot predict at this time the full impact the competitive bidding program and the developments in the competitive bidding program will have on our business and financial condition.



Healthcare reform may have a material adverse effect on our industry and our results of operations.  In March 2010, the ACA was signed into law in the United States. The ACA made changes that significantly impacted the healthcare industry, including medical device manufacturers. One of the principal purposes of the ACA was to expand health insurance coverage to millions of Americans who were uninsured. The ACA required adults not covered by an employer or government-sponsored insurance plan to maintain health insurance coverage or pay a penalty, a provision commonly referred to as the individual mandate.



The ACA also contained a number of provisions designed to generate the revenues necessary to fund the coverage expansions. This included new fees or taxes on certain health-related industries, including medical device manufacturers. Beginning in 2013, entities that manufacture, produce or import medical devices were required to pay an excise tax in an amount equal to 2.3% of the price for which such devices are sold in the United States. This excise tax is applicable to our products that are primarily used in hospitals and sleep labs, which includes the ApneaLink, VPAP Tx, certain Respiratory Care and dental sleep products. Through a series of legislative amendments, the tax was suspended for 2016 through 2019, but is scheduled to return beginning in 2020, absent further Congressional action. In addition to the competitive bidding changes discussed above, the ACA also included, among other things, demonstrations to develop organizations that are paid under a new payment methodology for voluntary coordination of care by groups of providers, such as physicians and hospitals, and the establishment of a new Patient-Centered Outcomes Research Institute to oversee, identify priorities in and conduct comparative clinical effectiveness research. The increased funding and focus on comparative clinical effectiveness research, which compares and evaluates the risks and benefits, clinical outcomes, effectiveness and appropriateness of products, may result in lower reimbursements by payors for our products and decreased profits to us.



Other federal legislative changes have been proposed and adopted since the ACA was enacted. These changes included an aggregate reduction in Medicare payments to providers of 2% per fiscal year, which went into effect on April 1, 2013 and will remain in effect through 2027 unless additional Congressional action is taken.  On January 2, 2013, the American Taxpayer Relief Act of 2012, was signed into law, which, among other things, further reduced Medicare payments to several providers, including hospitals, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years.



The full impact on our business of the ACA and other new laws is uncertain. Nor is it clear whether other legislative changes will be adopted, if any, or how such changes would affect the demand for our products. Future actions by the administration and the U.S. Congress including, but not limited to, repeal or replacement of the ACA could have a material adverse impact on our results of operations or financial condition. Additionally, all or a portion of the ACA and related subsequent legislation may be modified, repealed or otherwise invalidated through judicial challenge.



Various healthcare reform proposals have also emerged at the state level within the United States. The ACA as well as other federal and/or state healthcare reform measures that may be adopted in the future, singularly or in the aggregate, could have a material adverse effect on our business, financial condition and results of operations.



Failure to comply with anti-kickback and fraud regulations could result in substantial penalties and changes in our business operations.  Although we do not provide healthcare services, submit claims for third-party reimbursement, or receive payments directly from Medicare, Medicaid or other third-party payors for our products, we are subject to healthcare fraud and abuse regulation and enforcement by federal, state and foreign governments, which could significantly impact our business. We also are subject to foreign fraud and abuse laws, which vary by country.



---

 

In the United States, the laws that may affect our ability to operate include, but are not limited to:



The scope and enforcement of these laws are uncertain and subject to rapid change in the current environment of healthcare reform, especially in light of the lack of applicable precedent and regulations. Federal and state enforcement bodies have recently increased their scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry.  For example, in July 2016, we received a federal administrative subpoena from the Office of Inspector General, or OIG, of the Department of Health and Human Services. The subpoena contains a request for documents and other materials that relate primarily to industry offerings of patient resupply software to home medical equipment providers.  In November 2016, we received a second subpoena, requesting documents and other materials regarding discounted sales and leasing to sleep labs, samples, and other promotional programs. In August 2018, we received a third subpoena requesting documents and other materials relating to diagnostic devices and masks provided to medical providers and diagnostic auto-scoring functions. In addition, the government has informally requested information about our leasing arrangements with customers. We are cooperating with the government’s subpoenas and requests for documents and information.  Responding to investigations can be time-and resource-consuming and can divert management’s attention from the business. Additionally, as a result of these investigations, healthcare providers and entities may face litigation or have to agree to settlements that can include monetary penalties and onerous compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business. 

---

 



If our operations are found to be in violation of any of the laws described above or any other governmental regulations that apply to us now or in the future, we may be subject to penalties, including civil and criminal penalties, damages, fines, disgorgement, exclusion from governmental health care programs, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our financial results.



Our use and disclosure of individually identifiable information, including health information, is subject to federal, state and foreign privacy and security regulations, and our failure to comply with those regulations or to adequately secure the information we hold could result in significant liability or reputational harm.  The privacy and security of personally identifiable information stored, maintained, received or transmitted electronically is a major issue in the United States and abroad. While we strive to comply with all applicable privacy and security laws and regulations, as well as our own posted privacy policies, legal standards for privacy, including but not limited to ‘‘unfairness’’ and ‘‘deception,’’ as enforced by the FTC and state attorneys general, continue to evolve and any failure or perceived failure to comply may result in proceedings or actions against us by government entities or others, or could cause us to lose audience and customers, which could have a material adverse effect on our business. Recently, there has been an increase in public awareness of privacy issues in the wake of revelations about the activities of various government agencies and in the number of private privacy-related lawsuits filed against companies. Concerns about our practices with regard to the collection, use, disclosure, or security of personally identifiable information or other privacy-related matters, even if unfounded and even if we are in compliance with applicable laws, could damage our reputation and harm our business.



Numerous foreign, federal and state laws and regulations govern collection, dissemination, use and confidentiality of personally identifiable health information, including (i) state privacy and confidentiality laws (including state laws requiring disclosure of breaches); (ii) HIPAA; and (iii) European and other foreign data protection laws, including the GDPR.



HIPAA establishes a set of national privacy and security standards for the protection of individually identifiable health information, including what is known as protected health information, by health plans, healthcare clearinghouses and healthcare providers that submit certain covered transactions electronically, or covered entities, and their ‘‘business associates,’’ which are persons or entities that perform certain services for, or on behalf of, a covered entity that involve the use or disclosure of protected health information. Certain portions of our business, such as the cloud-based software digital health applications, are subject to HIPAA as a business associate of our covered entities clients.  To provide our covered entity clients with services that involve the use or disclosure of PHI, HIPAA requires us to enter into business associate agreements that require us to safeguard PHI in accordance with HIPAA. As a business associate, we are also directly liable for compliance with HIPAA. Penalties for violations of HIPAA regulations include civil and criminal penalties.



HIPAA authorizes state attorneys general to file suit under HIPAA on behalf of state residents. Courts can award damages, costs and attorneys’ fees related to violations of HIPAA in such cases. While HIPAA does not create a private right of action allowing individuals to sue us in civil court for HIPAA violations, its standards have been used as the basis for a duty of care claim in state civil suits such as those for negligence or recklessness in the misuse or breach of PHI.



HIPAA further requires business associates like us to notify our covered entity clients “without unreasonable delay and in no case later than 60 calendar days after discovery of the breach.” Covered entities must notify affected individuals “without unreasonable delay and in no case later than 60 calendar days after discovery of the breach” if their unsecured PHI is subject to an unauthorized access, use or disclosure. If a breach affects 500 patients or more, covered entities must report it to HHS and local media without unreasonable delay, and HHS will post the name of the breaching entity on its public website. If a breach affects fewer than 500 individuals, the covered entity must log it and notify HHS at least annually.



If we are unable to properly protect the privacy and security of health information entrusted to us, our solutions may be perceived as not secure, we may incur significant liabilities and customers may curtail their use of or stop using our solutions. In addition, if we fail to comply with the terms of our business associate agreements with our clients, we are liable not only contractually but also directly under HIPAA.



We are also subject to laws and regulations in non-U.S. countries covering data privacy and the protection of health-related and other personal information. EU member states and other jurisdictions have adopted data protection laws and regulations, which impose significant compliance obligations. Laws and regulations in these jurisdictions apply broadly to the collection, use, storage, disclosure and security of personal information that identifies or may be used to identify an individual, such as names, contact information, and sensitive personal data such as health data. These laws and regulations are subject to frequent revisions and differing interpretations, and have generally become more stringent over time.



---

 

In addition, as of May 25, 2018, the General Data Protection Regulation, or GDPR, has replaced the Data Protection Directive with respect to the processing of personal data in the European Union. The GDPR imposes several stringent requirements for controllers and processors of personal data, including, for example, higher standards for obtaining consent from individuals to process their personal data, more robust disclosures to individuals and a strengthened individual data rights regime, shortened timelines for data breach notifications, limitations on retention and secondary use of information, increased requirements pertaining to health data and pseudonymised (i.e., key-coded) data and additional obligations when we contract third party processors in connection with the processing of the personal data. The GDPR provides that EU member states may make their own further laws and regulations limiting the processing of genetic, biometric or health data, which could limit our ability to use and share personal data or could cause our costs could increase, and harm our business and financial condition. Failure to comply with the requirements of GDPR and the applicable national data protection laws of the EU member states may result in fines of up to €20,000,000 or up to 4% of the total worldwide annual turnover of the preceding financial year, whichever is higher, and other administrative penalties. To comply with the new data protection rules imposed by GDPR we may be required to put in place additional mechanisms ensuring compliance. This may be onerous and adversely affect our business, financial condition, results of operations and prospects. Compliance with such laws and regulations causes our costs to increase and harms our business and financial condition. Additionally, limitations on our ability to use and share personal data could adversely affect our business.



We are also subject to evolving EU laws on data export, as we may transfer personal data from the EU to other jurisdictions. These obligations may be interpreted and applied in a manner that is inconsistent from one jurisdiction to another and may conflict with other requirements or our practices. In addition, these rules are constantly under scrutiny. For example, following a decision of the Court of Justice of the European Union in October 2015, transferring personal data to U.S. companies that had certified as members of the U.S. Safe Harbor Scheme was declared invalid. In July 2016 the European Commission adopted the U.S.-EU Privacy Shield Framework which replaces the Safe Harbor Scheme. However, this Framework is under review and there is currently litigation challenging other EU mechanisms for adequate data transfers (i.e., the standard contractual clauses). It is uncertain whether the Privacy Shield Framework and/or the standard contractual clauses will be similarly invalidated by the European courts. We rely on a mixture of mechanisms to transfer personal data from our EU business to the U.S., and could be impacted by changes in law as a result of a future review of these transfer mechanisms by European regulators under the GDPR, as well as current challenges to these mechanisms in the European courts.



Any failure or perceived failure by us to comply with privacy or security laws, policies, legal obligations or industry standards or any security incident that results in the unauthorized release or transfer of personally identifiable information may result in governmental enforcement actions and investigations, fines and penalties, litigation and/or adverse publicity, including by consumer advocacy groups, and could cause our customers to lose trust in us, which could have an adverse effect on our reputation and business. Such failures could have a material adverse effect on our financial condition and operations. If the third parties we work with violate applicable laws, contractual obligations or suffer a security breach, such violations may also put us in breach of our obligations under privacy laws and regulations and/or could in turn have a material adverse effect on our business.



Our business activities are subject to extensive regulation, and any failure to comply could have a materially adverse effect on our business, financial condition, or results of operations.  We are subject to extensive U.S. federal, state, local and international regulations regarding our business activities. Failure to comply with these regulations could result in, among other things, recalls of our products, substantial fines and criminal charges against us or against our employees. Furthermore, our products could be subject to recall if the Food and Drug Administration, or the FDA, other regulators or we determine, for any reason, that our products are not safe or effective. Any recall or other regulatory action could increase our costs, damage our reputation, affect our ability to supply customers with the quantity of products they require and materially affect our operating results. 



Actual or attempted breaches of security, unauthorized disclosure of information, denial of service attacks or the perception that personal and/or other sensitive or confidential information in our possession is not secure, could result in a material loss of business, substantial legal liability or significant harm to our reputation.  We receive, collect, process, use and store a large amount of information from clients and our own employees, including personally identifiable, protected health and other sensitive and confidential information. This data is often accessed by us through transmissions over public and private networks, including the Internet. The secure transmission of such information over the Internet and other mechanisms is essential to maintain confidence in our information technology systems. We have implemented security measures, technical controls and contractual precautions designed to identify, detect and prevent unauthorized access, alteration, use or disclosure of our and our clients’ and employees’ data. However, there is no guarantee that these measures can provide absolute security. Beyond external criminal activity, systems that access or control access to our services and databases may be compromised as a result of human error, fraud or malice on the part of employees or third parties, or may result from accidental technological failure. Because the techniques used to circumvent security systems can be highly sophisticated and change frequently, often are not recognized until launched against a target and may originate from less regulated and remote areas around the world, we may be unable to proactively address all possible techniques or implement adequate preventive measures for all situations.



---

 

If someone is able to circumvent or breach our security systems, they could steal any information located therein or cause interruptions to our operations. Security breaches or attempts thereof could also damage our reputation and expose us to a risk of monetary loss and/or litigation, fines and sanctions. We also face risks associated with security breaches affecting third parties that conduct business with us or our clients and others who interact with our data. While we maintain insurance that covers certain security and privacy breaches, we may not carry appropriate insurance or maintain sufficient coverage to compensate for all potential liability. 



We are subject to diverse laws and regulations relating to data privacy and security, including HIPAA and European data privacy laws. Complying with these numerous and complex regulations is expensive and difficult, and failure to comply with these regulations could result in regulatory scrutiny, fines and civil liability. In addition, any security breach or attempt thereof could result in liability for stolen assets or information, additional costs associated with repairing any system damage, incentives offered to clients or other business partners to maintain business relationships after a breach, and implementation of measures to prevent future breaches, including organizational changes, deployment of additional personnel and protection technologies, employee training and engagement of third-party experts and consultants. Furthermore, these rules are constantly changing; for example, as stated above, the GDPR has been adopted, the EU-U.S. Safe Harbor Framework has been declared invalid and the EU-U.S. Privacy Shield Framework has recently been formally adopted by the European Commission while the standard contractual clauses are being challenged in the European courts. Additionally, the costs incurred to remediate any data security or privacy incident could be substantial.



We cannot assure you that any of our third-party service providers with access to our or our clients and/or employees’ personally identifiable and other sensitive or confidential information will maintain appropriate policies and practices regarding data privacy and security in compliance with all applicable laws or that they will not experience data security breaches or attempts thereof, which could have a corresponding effect on our business.



Product sales, introductions or modifications may be delayed or canceled as a result of FDA regulations or similar foreign regulations, which could cause our sales and profits to decline.  Unless a product is exempt, before we can market or sell a new medical device in the United States, we must obtain FDA clearance or approval, which can be a lengthy and time-consuming process.  We generally receive clearance from the FDA to market our products in the United States under Section 510(k) of the Federal Food, Drug, and Cosmetic Act or our products are exempt from the Section 510(k) clearance process. The 510(k) clearance process can be expensive, time-consuming and uncertain. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a device legally on the market, known as a “predicate” device, with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. The FDA has a high degree of latitude when evaluating submissions and may determine that a proposed device submitted for 510(k) clearance is not substantially equivalent to a predicate device.  After a device receives 510(k) premarket notification clearance from the FDA, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in the intended use of the device, technology, materials, packaging, and certain manufacturing processes may require a new 510(k) clearance or premarket approval.  We have modified some of our Section 510(k) approved products without submitting new Section 510(k) notices, which we do not believe were required. However, if the FDA disagrees with us and requires us to submit new Section 510(k) notifications for modifications to our existing products, we may be required to stop marketing the products while the FDA reviews the Section 510(k) notification.



Any new product introduction or existing product modification could be subjected to a lengthier, more rigorous FDA examination process. For example, in certain cases we may need to conduct clinical trials of a new product before submitting a 510(k) notice. We may also be required to obtain premarket approvals for certain of our products. Indeed, recent trends in the FDA’s review of premarket notification submissions suggest that the FDA is often requiring manufacturers to provide new, more expansive, or different information regarding a particular device than what the manufacturer anticipated upon 510(k) submission.  This has resulted in increasing uncertainty and delay in the premarket notification review process. 

 

For example, the FDA recently evaluated its guidance describing when it believes a manufacturer is obligated to submit a new 510(k) for modifications or changes to a previously cleared device.  Although the FDA had proposed a number of changes to a long-standing guidance from 1997 on this topic, the FDA concluded that manufacturers should continue adhering to the principles in the 1997 guidance. In August 2016, the FDA issued a new draft guidance, which FDA believes preserves the basic format and content of the 1997 guidance with updates to add clarity. The FDA’s ongoing review of the 510(k) program may make it more difficult for us to make modifications to our previously cleared products, either by imposing more strict requirements on when a manufacturer must submit a new 510(k) for a modification to a previously cleared product, or by applying more onerous review criteria to such submissions.  FDA continues to review its 510(k) clearance process which could result in additional changes to regulatory requirements or guidance documents which could increase the costs of compliance, or restrict our ability to maintain current clearances.  The requirements of the more rigorous premarket approval process and/or significant changes to the 510(k) clearance process could delay product introductions and increase the costs associated with FDA compliance.  Marketing and sale of our products outside the United States are also subject to regulatory clearances and approvals, and if we fail to obtain these regulatory approvals, our sales could suffer.  We cannot assure you that any new products we develop will receive required regulatory approvals from U.S. or foreign regulatory agencies.

---

 



We are subject to substantial regulation related to quality standards applicable to our manufacturing and quality processes. Our failure to comply with these standards could have an adverse effect on our business, financial condition, or results of operations.  The FDA regulates the approval, manufacturing, and sales and marketing of many of our products in the U.S. Significant government regulation also exists in Canada, Japan, Europe, and other countries in which we conduct business. As a device manufacturer, we are required to register with the FDA and are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulation requirements, which require manufacturers of medical devices to adhere to certain regulations, including testing, quality control and documentation procedures. In addition, the federal Medical Device Reporting regulations require us to provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or, if a malfunction were to occur, could cause or contribute to a death or serious injury. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections by the FDA. In the European Community, we are required to maintain certain ISO certifications in order to sell our products and must undergo periodic inspections by notified bodies to obtain and maintain these certifications. Failure to comply with current governmental regulations and quality assurance guidelines could lead to temporary manufacturing shutdowns, product recalls or related field actions, product shortages or delays in product manufacturing. Efficacy or safety concerns, an increase in trends of adverse events in the marketplace, and/or manufacturing quality issues with respect to our products could lead to product recalls or related field actions, withdrawals, and/or declining sales.



Laws regulating consumer contacts could adversely affect our business operations or create liabilities.  Our business activities include contacts with consumers in different parts of the world. Certain laws, such as the U.S. Telephone Consumer Protection Act, regulate telemarketing practices and certain automated outbound contacts with consumers, such as phone calls, texts or emails. Our use of outbound contacts may be restricted by existing laws, or by laws, regulations, or regulatory decisions that may be adopted in the future. If we are found to have violated these laws or regulations, we may be subjected to substantial fines, penalties, or liabilities to consumers.



Our products are the subject of clinical trials conducted by us, our competitors, or other third parties, the results of which may be unfavorable, or perceived as unfavorable, and could have a material adverse effect on our business, financial condition, and results of operations.  As a part of the regulatory process to obtain marketing clearance for new products and new indications for existing products, or for other reasons, we conduct and participate in numerous clinical trials with a variety of study designs, patient populations, and trial endpoints. We, our competitors, or other third parties may also conduct clinical trials involving our commercially marketed products.  The results of clinical trials may be unfavorable or inconsistent with previous findings, or could identify safety signals associated with our products.  For example, in May 2015, we announced the preliminary analysis of the data from the SERVE-HF clinical trial, which was designed to assess whether the treatment of moderate to severe predominant central sleep apnea with Adaptive Servo-Ventilation, or ASV therapy could reduce mortality and morbidity in patients with symptomatic chronic heart failure. The preliminary headline results showed no significant difference with respect to all-cause mortality and hospitalization. However, the analysis of the data identified a statistically significant, 2.5% absolute, increased risk of cardiovascular mortality for those patients in the trial who received ASV therapy with moderate to severe predominant central sleep apnea and symptomatic chronic heart failure with reduced ejection fraction. We worked with global regulatory authorities to revise the labels and instructions for use for ResMed ASV devices as well as informing healthcare providers, physicians, and patients of the cardiovascular safety signal observed in SERVE-HF.  Current or future clinical trials may not meet primary endpoints, may reveal disadvantages of our products and solutions for various markets we address, or could generate unfavorable or inconsistent clinical data. Clinical data, or the market’s or regulatory bodies’ perception of the clinical data, may adversely impact our ability to obtain product clearances or approvals, and our position in, and share of, the markets in which we participate.  Moreover, if these clinical trials identify serious safety issues associated with our marketed products, potentially adverse consequences could result, including that regulatory authorities could withdraw clearances or approvals of our products, we could be required to halt the marketing and sales of our products or recall our products, we could be required to update our product labeling with additional warnings, we could be sued and held liable for harm caused to patients, and our reputation may suffer.  Any of these could have a material adverse impact on our business, financial condition, and results of operations. 



Off-label marketing of our products could result in substantial penalties.  The FDA strictly regulates the promotional claims that may be made about FDA-cleared products.  In particular, clearance under Section 510(k) only permits us to market our products for the uses indicated on the labeling cleared by the FDA. We may request additional label indications for our current products, and the FDA may deny those requests outright, require additional expensive clinical data to support any additional indications or impose limitations on the intended use of any cleared products as a condition of clearance. If the FDA determines that we have marketed our products for off-label use, we could be subject to fines, injunctions or other penalties.  It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs, and the curtailment of our operations. Any of these events could significantly harm our business and results of operations and cause our stock price to decline.

---

 



Disruptions in the supply of components from our suppliers could result in a significant reduction in sales and profitability.  We purchase configured components for our devices from various suppliers, including some who are single-source suppliers for us. We cannot assure you that a replacement supplier would be able to configure its components for our devices on a timely basis or, in the alternative, that we would be able to reconfigure our devices to integrate the replacement part. A reduction or halt in supply while a replacement supplier reconfigures its components, or while we reconfigure our devices for the replacement part, would limit our ability to manufacture our devices in a timely or cost-effective manner, which could result in a significant reduction in sales and profitability. We cannot assure you that our inventories would be adequate to meet our production needs during any prolonged interruption of supply.



We are subject to potential product liability claims that may exceed the scope and amount of our insurance coverage, which would expose us to liability for uninsured claims.  We are subject to potential product liability claims as a result of the design, manufacture and marketing of medical devices.  Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates. In addition, we would have to pay any amount awarded by a court in excess of our policy limits. Our insurance policies have various exclusions, and thus we may be subject to a product liability claim for which we have no insurance coverage, in which case, we may have to pay the entire amount of any award. We cannot assure you that our insurance coverage will be adequate or that all claims brought against us will be covered by our insurance and we cannot assure you that we will be able to obtain insurance in the future on terms acceptable to us or at all. A successful product liability claim brought against us in excess of our insurance coverage, if any, may require us to pay substantial amounts, which could harm our business.



Our intellectual property may not protect our products, and/or our products may infringe on the intellectual property rights of third-parties.  We rely on a combination of patents, trade secrets and non-disclosure agreements to protect our intellectual property. Our success depends, in part, on our ability to obtain and maintain United States and foreign patent protection for our products, their uses and our processes to preserve our trade secrets and to operate without infringing on the proprietary rights of third-parties. We have a number of pending patent applications, and we do not know whether any patents will issue from any of these applications. We do not know whether any of the claims in our issued patents or pending applications will provide us with any significant protection against competitive products or otherwise be commercially valuable. Legal standards regarding the validity of patents and the proper scope of their claims are still evolving, and there is no consistent law or policy regarding the valid breadth of claims. Additionally, there may be third-party patents, patent applications and other intellectual property relevant to our products and technology which are not known to us and that block or compete with our products. We face the risks that:



Litigation may be necessary to enforce patents issued to us, to protect our proprietary rights, or to defend third-party claims that we have infringed on proprietary rights of others. For example, we are involved in litigation with Fisher & Paykel HealthCare, which has sued us in the U.S. District Court for the Southern District of California for allegedly infringing various of their patents. Related cases are now pending in New Zealand, Germany and Australia. If the outcome of any litigation or proceeding brought against us were adverse, we could be subject to significant liabilities to third-parties, could be required to obtain licenses from third-parties, could be forced to design around the patents at issue or could be required to cease sales of the affected products. A license may not be available at all or on commercially viable terms, and we may not be able to redesign our products to avoid infringement. Additionally, the laws regarding the enforceability of patents vary from country to country, and we cannot assure you that any patent issues we face will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.



Tax laws, regulations, and enforcement practices are evolving and may have a material adverse effect on our results of operations, cash flows and financial position.  Tax laws, regulations, and administrative practices in various jurisdictions are evolving and may be subject to significant changes due to economic, political, and other conditions. There are many transactions that occur during the ordinary course of business for which the ultimate tax determination is uncertain, and significant judgment is required in evaluating and estimating our provision and accruals for taxes. Governments are increasingly focused on ways to increase tax revenues, particularly from multinational corporations, which may lead to an increase in audit activity and aggressive positions taken by tax authorities.



---

 

Changes or clarifications to U.S. tax laws could materially affect the tax treatment of our domestic and foreign earnings. The Organisation for Economic Co-operation and Development, an international association of 34 countries, including the United States, released the final reports from its Base Erosion and Profit Shifting, or BEPS, Action Plans, which aim to standardize and modernize global tax policies. The BEPS Action Plans propose revisions to numerous tax rules, including country-by-country reporting, permanent establishment, hybrid entities and instruments, transfer pricing, and tax treaties. The BEPS Action Plans have been or are being enacted by countries where we have operations. 



In December 2017, “H.R.1”, the Tax Cuts and Jobs Act (“U.S. Tax Act”), was signed into law. The U.S. Tax Act significantly revises the U.S. corporate income tax by, among other things, imposing a one-time transition tax on unremitted foreign earnings, lowering the corporate income tax rate from 35 percent to 21 percent and implementing a territorial tax system in regard to foreign earnings. This resulted in the recognition of additional income tax expense of $138.0 million during the year ended June 30, 2018, which consists of $126.9 million for a transition tax imposed on all non-U.S. historical earnings that is payable over the next eight years and $11.1 million in tax expense due to the expected limitation of future deductions of our net deferred tax assets. The final additional income tax expense to be recognized on account of the U.S. Tax Act will be finalized before December 22, 2018. 



Developments in relevant tax laws, regulations, administrative practices and enforcement practices could have a material adverse effect on our operating results, financial position and cash flows, including the need to obtain additional financing.



We are subject to tax audits by various tax authorities in many jurisdictions.  Our income tax returns are based on calculations and assumptions that require significant judgment, and are subject to audit by various tax authorities. In addition, the calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax laws.  We regularly assess the potential outcomes of examinations by tax authorities in determining the adequacy of our provision for income taxes. 



We are currently under audit by the Australian Taxation Office (“ATO”) for the tax years 2009 to 2013, and in March 2018, we received Notices of Amended Assessments. Based on these assessments, the ATO is asserting that we owe $151.7 million in additional income tax and $38.4 million in accrued interest. We agreed to a payment arrangement with the ATO, whereby an amount of $75.9 million was paid by us in April 2018, with the remaining amounts due only if we are unsuccessful in defending our position. In June 2018, we received a notice from the ATO claiming penalties of 50% of the additional income tax that was assessed.  In accordance with the payment arrangement, all remaining tax, interest and penalty amounts outstanding are due only if we are unsuccessful in defending our position.  We do not agree with the ATO’s assessments and intend to pursue administrative and legal steps to defend our position. We continue to believe we are more likely than not to be successful in defending our position. However, if we are not successful, there may be material changes to our past or future taxable income, tax payable or deferred tax assets, we will not receive a refund of the $75.9 million we paid in April 2018, and we will be required to pay penalties and interest that could materially adversely affect our financial results. We have also been notified by the ATO that they intend to audit tax years 2014 to 2017.



Our quarterly operating results are subject to fluctuation for a variety of reasons.  Our operating results have, from time to time, fluctuated on a quarterly basis and may be subject to similar fluctuations in the future. These fluctuations may result from a number of factors, including:



Fluctuations in our quarterly operating results may cause the market price of our common stock to fluctuate.



---

 

If a natural or man-made disaster strikes our manufacturing facilities, we will be unable to manufacture our products for a substantial amount of time and our sales and profitability will decline.  Our facilities and the manufacturing equipment we use to produce our products would be costly to replace and could require substantial lead-time to repair or replace. The facilities may be affected by natural or man-made disasters and in the event they were affected by a disaster, we would be forced to rely on third-party manufacturers. Although we believe we possess adequate insurance for the disruption of our business from causalities, such insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.



Delaware law and provisions in our charter and could make it difficult for another company to acquire us.   Provisions of our certificate of incorporation may have the effect of delaying or preventing changes in control or management which might be beneficial to us or our security holders. In particular, our board of directors is divided into three classes, serving for staggered three-year terms. Because of this classification, it will require at least two annual meetings to elect directors constituting a majority of our board of directors. Additionally, our board of directors has the authority to issue up to 2,000,000 shares of preferred stock and to determine the price, rights, preferences, privileges and restrictions, including voting rights, of those shares without further vote or action by the stockholders.  The rights of the holders of our common stock will be subject to, and may be adversely affected by, the rights of the holders of any preferred stock that may be issued in the future.  The issuance of preferred stock may have the effect of delaying, deferring or preventing a change in control, may discourage bids for our common stock at a premium over the market price of our common stock and may adversely affect the market price of our common stock and the voting and other rights of the holders of our common stock.



You may not be able to enforce the judgments of U.S. courts against some of our assets or officers and directors.  A substantial portion of our assets are located outside the United States.  Additionally, some of our executive officers reside outside the United States, along with all or a substantial portion of their assets. As a result, it may not be possible for investors to enforce judgments of U.S. courts relating to any liabilities under U.S. securities laws against our assets, those persons or their assets. In addition, investors may not be able to pursue claims based on U.S. securities laws against these assets or these persons in Australian courts, where most of these assets and persons reside.



We are increasingly dependent on information technology systems and infrastructure.  Our technology systems are potentially vulnerable to breakdown or other interruption by fire, power loss, system malfunction, unauthorized access and other events. Likewise, data privacy breaches by employees and others with both permitted and unauthorized access to our systems may pose a risk that sensitive data may be exposed to unauthorized persons or to the public, or may be permanently lost. While we have invested heavily in the protection of data and information technology and in related training, there can be no assurance that our efforts will prevent significant breakdowns, breaches in our systems or other cyber incidents that could have a material adverse effect upon the reputation, business, operations or financial condition of the company. In addition, significant implementation issues may arise as we continue to consolidate and outsource certain computer operations and application support activities.



Our results of operations may be materially affected by global economic conditions generally, including conditions in the financial markets.  Recently, concerns over inflation, energy costs, geopolitical issues, the availability and cost of credit, and the ability of sovereign nations to pay their debts have contributed to increased volatility and diminished expectations for the economy and the financial markets going forward. These factors, combined with volatile commodity prices, declining business and consumer confidence and increased unemployment, have precipitated an economic slowdown. It is difficult to predict how long the current economic conditions will continue and whether the economic conditions will continue to deteriorate.  If the economic climate in the United States or outside the United States continues to deteriorate or there is a shift in government spending priorities, customers or potential customers could reduce or delay their purchases, which could impact our revenue, our ability to manage inventory levels, collect customer receivables, and ultimately decrease our profitability.



Our leverage and debt service obligations could adversely affect our business.  As of June 30, 2018,  our total consolidated debt was $281.5 million.  We may incur additional indebtedness in the future.  Our indebtedness could have adverse consequences, including:



---

 

Our debt service obligations will require us to use a portion of our operating cash flow to pay interest and principal in indebtedness, which could impede our growth.  Our ability to make payments on, and to refinance, our indebtedness, and to fund capital expenditures will depend on our ability to generate cash in the future.  This is subject to general economic, financial, competitive, legislative, regulatory, and other factors, many of which are beyond our control.



We may write-off intangible assets, such as goodwill.  We have recorded intangible assets, including goodwill in connection with our acquisitions.  At least on an annual basis, we will evaluate whether facts and circumstances indicate any impairment of the values of these intangible assets.  As circumstances change, we cannot assure you that the value of these intangible assets will be realized by us.  If we determine that a significant impairment has occurred, we will be required to write-off the impaired portion of intangible assets, which could have a material adverse effect on our results of operations in the period in which the write-off occurs.  



 

---

 

ITEM 1B  UNRESOLVED STAFF COMMENTS



We have received no written comments regarding our periodic or current reports from the staff of the SEC that were issued 180 days or more before the end of our fiscal year 2018 that remain unresolved.



ITEM 2  PROPERTIES



We conduct our operations in both owned and leased properties.  Our principal executive offices and U.S. sales facilities, consist of approximately 230,000 square feet and are located on Spectrum Center Boulevard in San Diego, California, in a building we own.  We have our primary research and development facilities, as well as office and manufacturing facilities at our owned site in Sydney, Australia.  Other facilities are leased in Atlanta, Georgia, and Moreno Valley, California, U.S.A.; Loyang and Galaxais, Singapore; Munich, Germany; Lyon, France; Suzhou, China; and Johor Bahru, Malaysia.



We believe that our facilities are adequate to meet the needs of our current business operations. At June 30, 2018, our principal owned and leased properties were as follows:





 

ITEM 3  LEGAL PROCEEDINGS



We are involved in various legal proceedings, claims, investigations and litigation that arise in the ordinary course of our business. We investigate these matters as they arise, and accrue estimates for resolution of legal and other contingencies in accordance with Statement of Financial Accounting Standard No. 5.  See Note 19 – Legal Actions and Contingencies of the Notes to Consolidated Financial Statements (Part II, Item 8) included in this report.



Litigation is inherently uncertain. Accordingly, we cannot predict with certainty the outcome of these matters.  But we do not expect the outcome of these matters to have a material adverse effect on our consolidated financial statements when taken as a whole.



Fisher & Paykel Healthcare patent litigation.  ResMed and Fisher & Paykel Healthcare are engaged in patent disputes in several global forums. Court cases related to the disputes are now pending in the United States (filed August 2016 in the Southern District of California), New Zealand (filed August 2016 in the High Court of New Zealand), Germany (filed on various dates in 2016 and 2017 in the District Court in Munich), and Australia (filed December 2017 in the Federal Court in Victoria). ResMed and Fisher & Paykel have also filed proceedings in patent offices in the United States, Germany and Europe to invalidate many of the patents being asserted against that party. German trial proceedings are set for October 11, 2018 and various dates in 2019 to be determined.  The opening portion of the Australian trial against ResMed is set for April 23, 2019 (with the closing portion to be set on a later date to be determined) and the New Zealand trial against Fisher & Paykel is set for July 8, 2019.  We believe that the claims we are asserting against Fisher & Paykel are strong, and that we have strong defenses to the claims Fisher & Paykel is asserting against us. Nevertheless, the claims asserted against us could cause us to incur significant expenses and, if successfully asserted against us, could require that we pay substantial damages or ongoing royalty payments, prevent us from selling certain of our products, or require that we comply with other unfavorable terms. We may also be obligated to pay substantial settlement costs, including royalty payments, in connection with these claims or litigation and to obtain licenses or modify products, which could be costly. Even if we were to prevail in these disputes, litigation regarding our intellectual property could be costly and time consuming and divert the attention of our management and key personnel from our business operations.



---

 

Administrative subpoenas.  In 2016, we received two federal administrative subpoenas from the Office of Inspector General of the U.S. Department of Health and Human Services. The subpoenas requested documents and other materials related primarily to industry offerings of patient resupply software to home medical equipment providers, discounted sales and leasing to sleep labs, samples, and other promotional programs.  In addition, the government has informally requested information about our leasing arrangements with customers. In August 2018 we received a third subpoena, requesting documents and other materials relating to diagnostic devices and masks provided to medical providers, and diagnostic auto-scoring functions.  We are cooperating with the government’s requests for documents and information. Responding to these investigations can consume substantial time and resources and can divert management’s attention from the business. Additionally, as a result of these investigations, healthcare providers and entities may face litigation or have to agree to settlements that can include monetary penalties and onerous compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business. If our operations are found to violate federal law or regulations, we may be subject to penalties, including civil and criminal penalties, damages, fines, disgorgement, exclusion from governmental health care programs, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our financial results.



ITEM 4  MINE SAFETY DISCLOSURES



Not Applicable. 

 



 

---

 

PART II



ITEM 5  MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES



Our common stock is traded on the NYSE under the symbol “RMD”. The following table sets forth for the fiscal periods indicated the high and low closing prices for the common stock as reported by the NYSE.







As of June 30, 2018, there were 25 holders of record of our common stock, although many of these holders of record own shares as nominees on behalf of other beneficial owners. During fiscal years 2018 and 2017, we paid dividends totaling $199.5 million and $186.3 million, respectively.  On August 2, 2018, we announced an increase in the quarterly dividend from $0.35 per share to $0.37 per share.  We pay the dividend in U.S. currency to holders of our common stock trading on the NYSE. Holders of CDIs trading on the ASX will receive an equivalent amount in Australian currency based on the exchange rate on the record date and reflecting the 10:1 ratio between CDIs and of common stock traded on the NYSE. We expect the dividend will continue to be unfranked for Australian tax purposes.  We expect to fund our dividend commitments with our operating cash flows and existing loan facilities. 



Securities Authorized for Issuance Under Equity Compensation Plans



The information included under Item 12 of Part III of this Report, “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters,” is hereby incorporated by reference into this Item 5 of Part II of this Report.



Purchases of Equity Securities



During all of our share buyback programs, we have repurchased an aggregate of 41.6 million shares at a total cost of $1.6 billion. The following table summarizes purchases by us of our common stock during the fiscal year ending June 30, 2018:







(1) On February 21, 2014, our board of directors approved our current share repurchase program, authorizing us to acquire up to an aggregate of 20.0 million shares of our common stock. The program allows us to repurchase shares of our common stock from time to time for cash in the open market, or in negotiated or block transactions, as market and business conditions warrant and subject to applicable legal requirements. There is no expiration date for this program, and the program may be accelerated, suspended, delayed or discontinued at any time at the discretion of our board of directors. All share repurchases after February 21, 2014 have been executed under this program. 

---

 

PERFORMANCE GRAPH



This performance graph is furnished and shall not be deemed “filed” with the SEC or subject to Section 18 of the Exchange Act, nor shall it be deemed incorporated by reference in any of our filings under the Securities Act of 1933, as amended.



The following graph compares the cumulative total stockholders return on our common stock from June 30, 2013 through June 30, 2018, with the comparable cumulative return of the S&P 500 index, the S&P 500 Health Care index, and the Dow Jones U.S. Medical Devices index. The graph assumes that $100 was invested in our common stock and each index on June 30, 2013. In addition, the graph assumes the reinvestment of all dividends paid. The stock price performance on the following graph is not necessarily indicative of future stock price performance.





The following table shows total indexed return of stock price plus reinvestments of dividends, assuming an initial investment of $100 at June 30, 2013, for the indicated periods.









 



 

---

 

ITEM 6  SELECTED FINANCIAL DATA



The following table summarizes certain selected consolidated financial data for, and as of the end of, each of the fiscal years in the five-year period ended June 30, 2018. The data set forth below should be read together with Item 7 of Part II of this report, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Item 8 of Part II of this report, “Consolidated Financial Statements and Supplementary Data”, and related notes included elsewhere in this report. The consolidated statement of income data for the years ended June 30, 2018, 2017 and 2016 and the consolidated balance sheet data as of June 30, 2018 and 2017 are derived from our audited consolidated financial statements included elsewhere in this report. The consolidated statement of income data for the years ended June 30, 2015 and 2014 and the consolidated balance sheet data as of June 30, 2016,  2015 and 2014 are derived from our audited consolidated financial statements. Historical results do not necessarily indicate the results to be expected in the future, and the results for the years presented should not be considered to indicate our future results of operations.









 



 

---

 

Overview



Management’s discussion and analysis of financial condition and results of operations is intended to help the reader understand the results of operations and financial condition of ResMed Inc. and subsidiaries. It is provided as a supplement to, and should be read together with the selected financial data and consolidated financial statements and notes included elsewhere in this report.



We are a global leader in the development, manufacturing, distribution and marketing of medical devices and cloud-based software applications that diagnose, treat and manage respiratory disorders, including sleep disordered breathing (“SDB), chronic obstructive pulmonary disease, neuromuscular disease and other chronic diseases. SDB includes obstructive sleep apnea and other respiratory disorders that occur during sleep. Our products and solutions are designed to improve patient quality of life, reduce the impact of chronic disease and lower healthcare costs as global healthcare systems continue to drive a shift in care from hospitals to the home and lower cost settings. Our cloud-based software digital health applications, along with our devices are designed to provide connected care to improve patient outcomes and efficiencies for our customers.



Since the development of continuous positive airway pressure therapy, we have expanded our business by developing or acquiring a number of products and solutions for a broader range of respiratory disorders including technologies to be applied in medical and consumer products, ventilation devices, diagnostic products, mask systems, headgear and other accessories, dental devices, portable oxygen concentrators and cloud-based software informatics solutions to manage patient outcomes and customer and provider business processes. Our growth has been fueled by geographic expansion, our research and product development efforts, acquisitions and an increasing awareness of SDB and respiratory conditions like chronic obstructive pulmonary disease as significant health concerns.   



We are committed to ongoing investment in research and development and product enhancements.  During fiscal year 2018, we invested approximately $155.1 million on research and development activities, which represents approximately 6.6% of net revenues with a continued focus on the development and commercialization of new, innovative products and solutions that improve patient outcomes, create efficiencies for our customers and help physicians and providers better manage chronic disease and lower healthcare costs.  During fiscal year 2018, we released new products including Mobi, a portable oxygen device, and QuietAir, a diffuser vent elbow. Through our acquisition of Brightree in 2016, we also acquired a suite of software-as-a-service (“SaaS”) solutions for U.S. based distributors and home health and hospice customers which we have continued to develop and improve.  These products, our cloud-based remote monitoring and therapy management system, and a robust product pipeline, should continue to provide us with a strong platform for future growth.



Net revenue in fiscal year 2018 increased to $2,340.2 million, an increase of 13% compared to fiscal year 2017. Gross profit increased for the year ended June 30, 2018 to $1,362.2 million, from $1,201.7 million for the year ended June 30, 2017,  an increase of $160.4 million or 13%.  Our net income for the year ended June 30, 2018 was $315.6 million or $2.19 per diluted share compared to net income of $342.3 million or $2.40 per diluted share for the year ended June 30, 2017. 



Total operating cash flow for fiscal year 2018 was $505.0 million and at June 30, 2018, our cash and cash equivalents totaled $188.7 million.  At June 30, 2018, our total assets were $3.1 billion and our stockholders’ equity was $2.1 billion. During fiscal year 2018, we repurchased 550,000 shares at a cost of $53.8 million under our share repurchase program. We paid a quarterly dividend of $0.35 per share during fiscal 2018 with a total amount of $199.5 million paid to stockholders.



In order to provide a framework for assessing how our underlying businesses performed, excluding the effect of foreign currency fluctuations, we provide certain financial information on a “constant currency basis”, which is in addition to the actual financial information presented.  In order to calculate our constant currency information, we translate the current period financial information using the foreign currency exchange rates that were in effect during the previous comparable period.  However, constant currency measures should not be considered in isolation or as an alternative to U.S. dollar measures that reflect current period exchange rates, or to other financial measures calculated and presented in accordance with U.S. generally accepted accounting principles.



Fiscal Year Ended June 30, 2018 Compared to Fiscal Year Ended June 30, 2017



Net Revenues.  Net revenue for the year ended June 30, 2018 increased to $2,340.2 million from $2,066.7 million for the year ended June 30, 2017,  an increase of $273.5 million or 13% (a 10% increase on a constant currency basis). Net revenue for the year ended June 30, 2018 includes revenue of $157.0 million from our SaaS operations.  Excluding revenue attributable to SaaS, net revenue for the year ended June 30, 2018 increased to $2,183.2 million from $1,928.7 million for the year ended June 30, 2017,  an increase of $254.5 million or 13% (an increase of 10% on a constant currency basis).  The increase in net revenue was attributable to an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.  Movements in international currencies against the U.S. dollar positively impacted net revenues by approximately $57.2 million for the year ended June 30, 2018. 

---

 



Net revenue in U.S., Canada and Latin America for the year ended June 30, 2018 increased to $1,447.1 million from $1,310.1 million for the year ended June 30, 2017,  an increase of $137.0 million or 10%. Excluding revenue attributable to SaaS, net revenue in U.S., Canada and Latin America for the year ended June 30, 2018 increased to $1,290.1 million from $1,172.1 million for the year ended June 30, 2017, an increase of $118.0 million or 10%. The increase in net revenue in U.S., Canada and Latin America, excluding revenue attributable to SaaS, is primarily due to an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.



Net revenue in markets in combined Europe, Asia and other markets increased for the year ended June 30, 2018 to $893.1 million from $756.6 million for the year ended June 30, 2017, an increase of $136.5 million or 18% (an increase of 11% on a constant currency basis).  The constant currency increase in sales in combined Europe, Asia and other markets predominantly reflects an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices. 



Net revenue from devices for the year ended June 30, 2018 increased to $1,303.6 million from $1,161.0 million for the year ended June 30, 2017,  an increase of $142.6 million or 12%, including an increase of 9% in U.S., Canada and Latin America and an increase of 16% in combined Europe, Asia and other markets (a 9% increase on a constant currency basis).  Net revenue from masks and other accessories for the year ended June 30, 2018 increased to $879.6 million from $767.7 million for the year ended June 30, 2017,  an increase of 15%, including an increase of 11% in U.S., Canada and Latin America and an increase of 22% in combined Europe, Asia and other markets (a 15% increase on a constant currency basis).  Excluding the impact of foreign currency movements, device sales for the year ended June 30, 2018 increased by 9%, and masks and accessories sales increased by 12%, compared to the year ended June 30, 2017. 



The following table summarizes the percentage movements in our net revenue for the year ended June 30, 2018 compared to the year ended June 30, 2017:



* Constant currency numbers exclude the impact of movements in international currencies.



Gross Profit.  Gross profit increased for the year ended June 30, 2018 to $1,362.2 million from $1,201.7 million for the year ended June 30, 2017,  an increase of $160.4 million or 13%.  Gross profit as a percentage of net revenue was 58.2% for the year ended June 30, 2018, compared with the 58.1% for the year ended June 30, 2017.  The increase in gross margin was due primarily to manufacturing and procurement efficiencies, partly offset by declines in our average selling prices.



Selling, General and Administrative Expenses.  Selling, general and administrative expenses increased for the year ended June 30, 2018 to $600.4 million from $554.0 million for the year ended June 30, 2017,  an increase of $46.4 million or 8%. The selling, general and administrative expenses, as reported in U.S. dollars, were unfavorably impacted by the movement of international currencies against the U.S. dollar, which increased our expenses by approximately $17.8 million. Excluding the impact of foreign currency movements, selling, general and administrative expenses for the year ended June 30, 2018 increased by 5% compared to the year ended June 30, 2017. As a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2018 improved to 25.7% compared to 26.8% for the year ended June 30, 2017.  



The increase in selling, general and administrative expenses was primarily due to additional expenses associated with doubtful debts and additional personnel to support our commercial activities.



Research and Development Expenses.  Research and development expenses increased for the year ended June 30, 2018 to $155.1 million from $144.5 million for the year ended June 30, 2017,  an increase of $10.7 million or 7%. The research and development expenses were unfavorably impacted by movement of international currencies against the U.S. dollar, which increased our expenses by approximately $3.6 million, as reported in U.S. dollars.  Excluding the impact of foreign currency movements, research and development expenses for the year ended June 30, 2018 increased by 5% compared to the year ended June 30, 2017.  As a percentage of net revenue, research and development expenses were 6.6% for the year ended June 30, 2018 compared to 7.0% for the year ended June 30, 2017. 

---

 



The increase in research and development expenses in constant currency terms was primarily due to an increase in the number of research and development personnel, and an increase in materials and tooling costs incurred to facilitate development of new products.



Amortization of Acquired Intangible Assets.  Amortization of acquired intangible assets for the year ended June 30, 2018 totaled $46.4 million compared to $46.6 million for the year ended June 30, 2017.



Restructuring expenses.  During the year ended June 30, 2018 we incurred restructuring expenses of $18.4 million associated with a global strategic workforce planning review, which resulted in a reduction in headcount across most of our functions and locations and closure of our Paris site. We recorded the full amount of $18.4 million during the year ended June 30, 2018, within our operating expenses which was separately disclosed as restructuring expenses and had $1.5 million remaining in our employee related costs accrual at year end. The restructuring expenses consisted primarily of severance payments to employees and the remaining expense relating to legal and consulting services associated with the completion of the employee severances and contract exit costs associated with the Paris site.



During the year ended June 30, 2017 we incurred restructuring expenses of $12.4 million associated with the reorganization of our Paris manufacturing activities and German research and development activities. The restructuring expenses consisted primarily of severance payments to employees in our German and Paris facilities, site closure costs and associated project cancellation costs.



Total Other Income (Loss), Net.  Total other income (loss), net for the year ended June 30, 2018 was a loss of $20.5 million, compared with a loss of $7.1 million for the year ended June 30, 2017.  The change was due primarily to the impairment of our cost method investments of $11.6 million for the year ended June 30, 2018 compared to $2.0 million for the year ended June 30, 2017, and the loss on foreign currency transactions of $1.5 million for the year ended June 30, 2018 compared to a gain of $5.4 million for the year ended June 30, 2017.



Income Taxes.  Our effective income tax rate increased to 39.5% for the year ended June 30, 2018 from 18.3% for the year ended June 30, 2017. Our effective tax rate was impacted by charges associated with the U.S. Tax Act which was enacted in December 2017, and resulted in additional income tax expense of $138.0 million for the year ended June 30, 2018. Specifically, the effective tax rate includes both the transition tax imposed on our accumulated foreign earnings resulting in additional income tax expense of $126.9 million which, is payable over eight years and the reduction in the carrying value due to the lower corporate tax rate and the expected limitation of future deductions of our net deferred tax assets, which resulted in additional income tax expense of $11.1 million for the year ended June 30, 2018.



On December 22, 2017, the SEC issued guidance under Staff Accounting Bulletin No. 118, Income Tax Accounting Implications of the Tax Cuts and Jobs Act (“SAB 118”) directing taxpayers to consider the impact of the U.S. Tax Act as “provisional” when it does not have the necessary information available, prepared or analyzed (including computations) in reasonable detail to complete its accounting for the change in tax law. In accordance with SAB 118, the additional estimated income tax of $138.0 million for the year ended June 30, 2018 represents our best estimate based on current interpretation of the U.S. Tax Act. We are still accumulating data necessary to finalize the underlying calculations and analyzing expected U.S. Treasury guidance on the application of certain provisions of the U.S. Tax Act. In accordance with SAB 118, the additional estimated income tax of $138.0 million recorded in the year ended June 30, 2018 is considered provisional and will be finalized before December 22, 2018.



Our effective income tax rate was affected by the geographic mix of our earnings.  Our Singapore and Malaysia operations operate under certain tax holidays and tax incentive programs that will expire in whole or in part at various dates through June 30, 2030.  During the year ended June 30, 2018, as a result of the U.S. Tax Act, we treated all non-U.S. historical earnings as taxable, which resulted in additional tax expense of $126.9 million. Therefore, future repatriation of cash held by our non-U.S. subsidiaries will generally not be subject to U.S. federal income tax if repatriated. We do not believe it will be necessary to repatriate earnings held outside of the U.S. and anticipate our domestic liquidity needs will be met through cash flows provided by domestic operating activities, supplemented with long-term debt and short-term borrowings. Accordingly, we intend to continue to indefinitely reinvest our earnings held outside of the U.S. in our foreign operations.



---

 

In connection with the audit by the Australian Taxation Office (“ATO”) for the tax years 2009 to 2013, we received Notices of Amended Assessments in March 2018. Based on these assessments, the ATO is asserting that we owe $151.7 million in additional income tax and $38.4 million in accrued interest. We agreed to a payment arrangement with the ATO and we paid $75.9 million to the ATO in April 2018, with the remaining amounts due only if we are unsuccessful in defending our position. At June 30, 2018, we have recorded a receivable in prepaid taxes and other non-current assets for the amount paid as we ultimately expect this will be refunded by the ATO. In June 2018, we received a notice from the ATO claiming penalties of 50% of the additional income tax that was assessed.  In accordance with the payment arrangement, all remaining tax, interest and penalty amounts outstanding are due only if we are unsuccessful in defending our position.  We have also been notified by the ATO that they intend to audit tax years 2014 to 2017.



Net Income and Earnings per Share.  As a result of the factors above, our net income for the year ended June 30, 2018 was $315.6 million compared to net income of $342.3 million for the year ended June 30, 2017. Our earnings per diluted share for the year ended June 30, 2018 was $2.19 compared to $2.40 for the year ended June 30, 2017,  a decrease of 9%.  The decrease in earnings per diluted share was primarily due to additional income tax expense of $138.0 million resulting from changes arising from the U.S. Tax Act.



Fiscal Year Ended June 30, 2017 Compared to Fiscal Year Ended June 30, 2016



Net Revenues.  Net revenue for the year ended June 30, 2017 increased to $2,066.7 million from $1,838.7 million for the year ended June 30, 2016, an increase of $228.0 million or 12% (a 13% increase on a constant currency basis). Net revenue for the year ended June 30, 2017 includes revenue of $138.1 million from our SaaS operations.  Excluding revenue attributable to SaaS, net revenue for the year ended June 30, 2017 was $1,928.7 million, an increase of $118.9 million or 7% compared to the year ended June 30, 2016 (an 8% increase on a constant currency basis).  The increase in net revenue was attributable to an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.  Movements in international currencies against the U.S. dollar negatively impacted net revenues by approximately $17.2 million for the year ended June 30, 2017. 



Net revenue in U.S., Canada and Latin America for the year ended June 30, 2017 increased to $1,310.1 million from $1,130.4 million for the year ended June 30, 2016, an increase of $179.7 million or 16%. Excluding revenue attributable to SaaS, net revenue in U.S., Canada and Latin America increased for the year ended June 30, 2017 to $1,172.1 million, an increase of $70.5 million or 6%. The increase in net revenue in U.S., Canada and Latin America, excluding revenue attributable to SaaS, is primarily due to an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.



Net revenue in markets in combined Europe, Asia and other markets increased for the year ended June 30, 2017 to $756.6 million from $708.3 million for the year ended June 30, 2016, an increase of $48.3 million or 7% (a 9% increase on a constant currency basis).  The constant currency increase in sales in combined Europe, Asia and other markets predominantly reflects an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.



Net revenue from devices for the year ended June 30, 2017 increased to $1,161.0 million from $1,064.2 million for the year ended June 30, 2016, an increase of $96.8 million or 9%, including an increase of 9% in the United States, Canada and Latin America and an increase of 10% in combined Europe, Asia and other markets (a 12% increase on a constant currency basis).  Net revenue from masks and other accessories for the year ended June 30, 2017 increased to $767.7 million from $745.6 million for the year ended June 30, 2016, an increase of 3%, including an increase of 4% in the United States, Canada and Latin America and an increase of 1% in combined Europe, Asia and other markets (a 4% increase on a constant currency basis).  Excluding the impact of foreign currency movements, device sales for the year ended June 30, 2017 increased by 10%, and masks and accessories sales increased by 4%, compared to the year ended June 30, 2016. 



The following table summarizes the percentage movements in our net revenue, excluding revenue attributable to SaaS following the closing of our acquisition of Brightree, for the year ended June 30, 2017 compared to the year ended June 30, 2016:



* Constant currency numbers exclude the impact of movements in international currencies.



---

 

Gross Profit.  Gross profit increased for the year ended June 30, 2017 to $1,201.7 million from $1,066.5 million for the year ended June 30, 2016, an increase of $135.2 million or 13%.  Gross profit as a percentage of net revenue was 58.1% for the year ended June 30, 2017, compared with the 58.0% for the year ended June 30, 2016.  The increase in gross margin was due primarily to manufacturing and procurement efficiencies, and an incremental contribution from the Brightree acquisition, partly offset by declines in our average selling prices and unfavorable product mix as sales of our lower margin products represented a higher proportion of our sales.



Selling, General and Administrative Expenses.  Selling, general and administrative expenses increased for the year ended June 30, 2017 to $554.0 million from $488.1 million for the year ended June 30, 2016, an increase of $65.9 million or 14%. The selling, general and administrative expenses, as reported in U.S. dollars, were favorably impacted by the movement of international currencies against the U.S. dollar, which decreased our expenses by approximately $1.2 million. Excluding the impact of foreign currency movements, selling, general and administrative expenses for the year ended June 30, 2017 increased by 14% compared to the year ended June 30, 2016. As a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2017 were 26.8%, compared to 26.5% for the year ended June 30, 2016.

 

The increase in selling, general and administrative expenses was primarily due to additional personnel to support our commercial activities, increased legal expenses, increased professional fees and additional expenses associated with the consolidation of recent acquisitions.



Research and Development Expenses.  Research and development expenses increased for the year ended June 30, 2017 to $144.5 million from $118.7 million for the year ended June 30, 2016, an increase of $25.8 million or 22%. The research and development expenses were unfavorably impacted by the appreciation of the Australian dollar against the U.S. dollar, which increased our expenses by approximately $3.7 million, as reported in U.S. dollars.  Excluding the impact of foreign currency movements, research and development expenses for the year ended June 30, 2017 increased by 19% compared to the year ended June 30, 2016.  As a percentage of net revenue, research and development expenses were 7.0% for the year ended June 30, 2017 compared to 6.5% for the year ended June 30, 2016. 



The increase in research and development expenses in constant currency terms was primarily due to an increase in the number of research and development personnel, an increase in materials and tooling costs incurred to facilitate development of new products and additional expenses associated with the consolidation of recent acquisitions. 



Restructuring Expenses.  During the year ended June 30, 2017, we incurred restructuring expenses of $12.4 million associated with the reorganization of our Paris manufacturing activities and German research and development activities. The restructuring expenses consisted primarily of severance payments to employees in our German and Paris facilities, site closure costs and associated project cancellation costs. We recorded the full amount of $12.4 million during the year ended June 30, 2017, within our operating expenses and separately disclosed the amount as restructuring expenses and had $6.5 million remaining in our employee related costs accrual at year end. During the year ended June 30, 2016, we incurred restructuring expenses of $6.9 million associated with the rationalizing our European research and development operations and manufacturing facilities. The restructuring expenses consisted primarily of severance payments and an asset write-down of a legacy manufacturing facility.



Amortization of Acquired Intangible Assets.  Amortization of acquired intangible assets for the year ended June 30, 2017 totaled $46.6 million compared to $23.9 million for the year ended June 30, 2016.  The increase in amortization expense was attributable to our acquisitions from the prior year, in particular Brightree, Curative Medical and Inova Labs.



Total Other Income (Loss), Net.  Total other income (loss), net for the year ended June 30, 2017 was a loss of $7.1 million, compared with an income of $10.6 million for the year ended June 30, 2016.  The change was due primarily to an increase in interest expense due to higher borrowings.  



Income Taxes.  Our effective income tax rate decreased to 18.3% for the year ended June 30, 2017 from 19.8% for the year ended June 30, 2016. Our effective income tax rate is affected by the geographic mix of our taxable income, including lower taxes associated with our Singapore and Malaysia manufacturing operations.  Our Singapore and Malaysia operations operate under certain tax holidays and tax incentive programs which will expire in whole or in part at various dates through June 30, 2020.  As of June 30, 2017, we have not provided for U.S. income taxes for the undistributed earnings of our foreign subsidiaries. We intend for these earnings to be permanently reinvested outside the United States.



Net Income and Earnings per Share.  As a result of the factors above, our net income for the year ended June 30, 2017 was $342.3 million compared to net income of $352.4 million for the year ended June 30, 2016. Our earnings per diluted share for the year ended June 30, 2017 was $2.40 compared to $2.49 for the year ended June 30, 2016, a decrease of 4%.

---

 



Liquidity and Capital Resources



As of June 30, 2018 and June 30, 2017, we had cash and cash equivalents of $188.7 million and $821.9 million, respectively. Working capital was $0.6 billion and $1.3 billion, at June 30, 2018 and June 30, 2017, respectively. The reduction in working capital was mainly due to net debt repayment of $796.2 million during the year ending June 30, 2018. As of June 30, 2018 we had $0.3 billion of borrowings under our credit facility agreement as compared to $1.1 billion at June 30, 2017.



As of June 30, 2018 and June 30, 2017, our cash and cash equivalent balances held within the United States amounted to $36.9 million and $23.2 million, respectively. Our remaining cash and cash equivalent balances at June 30, 2018 and June 30, 2017, of $151.8 million and $798.7 million, respectively, were held by our non-U.S. subsidiaries. Our cash and cash equivalent balances are held at highly rated financial institutions.



We repatriated $1.4 billion and $215 million to the United States in fiscal years 2018 and 2017, respectively, from earnings generated in each of those years. The amount of the current year foreign earnings that we have repatriated to the United States in the past has been determined, and the amount that we expect to repatriate during fiscal year 2019 will be determined, based on a variety of factors, including current year earnings of our foreign subsidiaries, foreign investment needs and the cash flow needs we have in the United States, such as for the repayment of debt, dividend distributions, and other domestic obligations. The majority of our repatriation of foreign subsidiaries’ earnings to the United States. has historically occurred at year-end, although we may repatriate funds earlier in the year based on our business needs, as we did during the year ended June 30, 2018.



During the year ended June 30, 2018, as a result of the U.S. Tax Act, we have treated all non-U.S. historical earnings as taxable, which resulted in additional tax expense of $126.9 million which is payable over the next eight years.  Therefore, future repatriation of cash held by our non-U.S. subsidiaries will generally not be subject to U.S. federal tax if repatriated. As we evaluate the impact of the U.S. Tax Act and the future cash needs of our global operations, we may revise the amount of foreign earnings considered to be permanently reinvested outside the United States. 



Inventories at June 30, 2018 were $268.7 million which is consistent with the balance at June 30, 2017 of $268.3 million.



Accounts receivable, net of allowance for doubtful accounts, at June 30, 2018 were $483.7 million, an increase of $33.2 million or 7% over the June 30, 2017 accounts receivable balance of $450.5 million. Accounts receivable days sales outstanding of 69 days at June 30, 2018 increased by 1 day compared to 68 days at June 30, 2017. Our allowance for doubtful accounts as a percentage of total accounts receivable at June 30, 2018 and 2017 was 3.8% and 2.4%, respectively.



During the year ended June 30, 2018, we generated cash of $505.0 million from operations. This was higher than the cash generated from operations for the year ended June 30, 2017 of $414.1 million, which was primarily due to the increase in underlying net income, when excluding the additional income tax expense of $138.0 million relating to the enactment of the U.S. Tax Act. This additional income tax expense is payable over of the next eight years and therefore, is not expected to materially impact our operating cash flows.     Movements in foreign currency exchange rates during the year ended June 30, 2018 had the effect of decreasing our cash and cash equivalents by $9.7 million, as reported in U.S. dollars. 



During fiscal year 2018, we repurchased 550,000 shares at a cost of $53.8 million and during fiscal year 2017, we did not purchase any shares under our share repurchase program.  During fiscal years 2018 and 2017, we also paid dividends totaling $199.5 million and $186.3 million, respectively.



Details of contractual obligations at June 30, 2018 are as follows (in thousands):





---

 

Details of other commercial commitments at June 30, 2018 are as follows (in thousands):