UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549



 

FORM 10-K



 

 
(Mark One)     
x   ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended August 31, 2013

OR

 
o   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from             to            

Commission file number 1-14130



 

MSC INDUSTRIAL DIRECT CO., INC.

(Exact Name of Registrant as Specified in Its Charter)



 

 
New York   11-3289165
(State or Other Jurisdiction of Incorporation or Organization)   (I.R.S. Employer Identification No.)

 
75 Maxess Road, Melville, New York   11747
(Address of Principal Executive Offices)   (Zip Code)

(516) 812-2000

(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:



 

 
Title of Each Class   Name of Each Exchange on Which Registered
Class A Common Stock, par value $.001   The New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None



 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

     
Large accelerated filer x   Accelerated filer o   Non-accelerated filer o
(Do not check if a smaller
reporting company)
  Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No x

The aggregate market value of Class A common stock held by non-affiliates of the registrant as of March 2, 2013 was approximately $4,073,351,019. As of October 18, 2013, 49,270,912 shares of Class A common stock and 14,140,747 shares of Class B common stock of the registrant were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

The registrant’s Proxy Statement for its 2014 annual meeting of stockholders is hereby incorporated by reference into Part III of this Annual Report on Form 10-K.

 

 


 
 

TABLE OF CONTENTS

MSC INDUSTRIAL DIRECT CO., INC.
 
TABLE OF CONTENTS

 
  Page
PART I
        

  

FORWARD-LOOKING STATEMENTS

    1  

ITEM 1.

BUSINESS

    1  

ITEM 1A.

RISK FACTORS

    12  

ITEM 1B.

UNRESOLVED STAFF COMMENTS

    17  

ITEM 2.

PROPERTIES

    17  

ITEM 3.

LEGAL PROCEEDINGS

    18  

ITEM 4.

MINE SAFETY DISCLOSURES

    18  
PART II
        

ITEM 5.

MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

    19  

ITEM 6.

SELECTED FINANCIAL DATA

    21  

ITEM 7.

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

    22  

ITEM 7A.

QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT
MARKET RISK

    35  

ITEM 8.

FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

    36  

ITEM 9.

CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

    62  

ITEM 9A.

CONTROLS AND PROCEDURES

    62  

ITEM 9B.

OTHER INFORMATION

    65  
PART III
        

ITEM 10.

DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

    65  

ITEM 11.

EXECUTIVE COMPENSATION

    65  

ITEM 12.

SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

    65  

ITEM 13.

CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

    65  

ITEM 14.

PRINCIPAL ACCOUNTANT FEES AND SERVICES

    65  
PART IV
        

ITEM 15.

EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

    66  

  

SIGNATURES

    67  

i


 
 

TABLE OF CONTENTS

PART I.

FORWARD-LOOKING STATEMENTS

Except for historical information contained herein, certain matters included in this Annual Report on Form 10-K are, or may be deemed to be forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934 and Section 27A of the Securities Act of 1933. The words “will,” “may,” “designed to,” “believe,” “should,” “anticipate,” “plan,” “expect,” “intend,” “estimate” and similar expressions identify forward-looking statements, which speak only as of the date of this annual report. These forward-looking statements are contained principally under Item 1, “Business,” and under Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Because these forward-looking statements are subject to risks and uncertainties, actual results could differ materially from the expectations expressed in the forward-looking statements. Important factors that could cause actual results to differ materially from the expectations reflected in the forward-looking statements include those described in Item 1A, “Risk Factors” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” In addition, new risks emerge from time to time and it is not possible for management to predict all such risk factors or to assess the impact of such risk factors on our business. Given these risks and uncertainties, the reader should not place undue reliance on these forward-looking statements. We undertake no obligation to update or revise these forward-looking statements to reflect subsequent events or circumstances.

ITEM 1. BUSINESS.

General

MSC Industrial Direct Co., Inc. (together with its subsidiaries, “MSC,” the “Company,” “we,” “our,” or “us”) is one of the largest direct marketers and distributors of a broad range of metalworking and maintenance, repair and operations (“MRO”) products to customers throughout North America.

In April 2013, we completed the acquisition of the North American distribution business (“BDNA”) of Barnes Group Inc. (“Barnes”), a leading distributor of fasteners and other high margin, low cost consumables with a broad distribution footprint throughout the U.S. and Canada. BDNA has a strong presence with customers across manufacturing, government, transportation and natural resources end-markets. The BDNA business specializes in lowering the total cost of its customers' inventory management through storeroom organization and vendor managed inventory. The Business services roughly 31,000 customers with nearly 1,400 associates, including over 650 field sales associates, and offers more than 55,000 SKUs of products. The information contained in this Annual Report on Form 10-K includes the operations of BDNA, unless otherwise noted. The acquisition has been accounted for as a business purchase pursuant to Accounting Standards Codification Topic 805, “Business Combinations” (“ASC 805”). The financial results of BDNA’s operations were included in the Company’s consolidated financial statements beginning on the acquisition date, which was April 22, 2013.

We operate primarily in the United States, with customers in all 50 states, through a network of fourteen customer fulfillment centers (ten customer fulfillment centers are located within the United States, one is located in the United Kingdom (the “U.K.”), and three are located in Canada) and 105 branch offices (103 branches are located within the United States, one is located in the U.K. and the other is located in Mexico). MSC’s primary customer fulfillment centers are located in or near Harrisburg, Pennsylvania; Atlanta, Georgia; Elkhart, Indiana and Reno, Nevada. In addition, we operate 10 smaller customer fulfillment centers in or near Reno, Nevada (2nd location); Hanover Park, Illinois; Dallas, Texas; Elizabethtown, Kentucky; Edison, New Jersey; Shelbyville, Kentucky; Wednesbury, United Kingdom; Edmonton, Canada; Beamsville, Canada; and Moncton, Canada. Our experience has been that areas accessible by next-day delivery generate significantly greater sales than areas where next-day delivery is not available. Excluding BDNA, we offer a nationwide cutoff time of 8:00 P.M. Eastern Time on qualifying orders, which will be delivered to the customer the next-day at no additional cost over standard MSC ground delivery charges.

Excluding BDNA, we offer approximately 685,000 stock-keeping units (“SKUs”) through our master catalogs, weekly, monthly and quarterly specialty and promotional catalogs, brochures and the Internet,

1


 
 

TABLE OF CONTENTS

including our websites, mscdirect.com, mscmetalworking.com and use-enco.com (the “MSC Websites”). Most of our products are carried in stock, and orders for these in-stock products are typically fulfilled the day on which the order is received.

Our business strategy is to provide an integrated, lower cost solution to the purchasing, management and administration of our customers’ MRO needs. We believe we add value to our customers’ purchasing process by reducing their total costs for MRO supplies, taking into account both the direct cost of products and the administrative, personnel and financial cost of obtaining and maintaining MRO supplies. We reduce our customers’ costs for their MRO supplies in the following manner:

our extensive product offerings allow customers to reduce the administrative burden of dealing with many suppliers for their MRO needs;
we guarantee same-day shipping of our core business products and offer next-day delivery on qualifying orders placed up until 8:00 P.M. Eastern Time (excluding BDNA), which enables our customers to reduce their inventory investment and carrying costs;
we consolidate multiple purchases into a single order, provide a single invoice relating to multiple purchases over varying periods of time and offer direct shipments to specific departments and personnel within a single facility or multiple facilities, allowing our customers to reduce administrative paperwork, costs of shipping and personnel costs related to internal distribution and purchase order management;
we have extensive eCommerce capabilities that enable our customers to lower their procurement costs. This includes many features such as sophisticated search and transaction capabilities, access to real-time inventory, customer specific pricing, workflow management tools, customized reporting and other features. We can also interface directly with many purchasing portals, such as ARIBA and Perfect Commerce, in addition to ERP Procurement Solutions, such as Oracle and SAP; and
we offer inventory management solutions with our Vendor Managed Inventory (“VMI”), Customer Managed Inventory (“CMI”) systems and vending solutions, that can lower our customers’ inventory investment, reduce sourcing costs and out-of-stock situations and increase business efficiency. Orders generated through these inventory management solutions are integrated directly with mscdirect.com and many third party eProcurement software solutions.

Our customers include a wide range of purchasers of industrial supply products, from individual machine shops to Fortune 1000 companies, to government agencies such as the General Services Administration (“GSA”) and the Department of Defense. Our business focuses on selling relatively higher margin, lower volume products for which we had an average order size, excluding BDNA, of approximately $403 in fiscal 2013. Excluding BDNA, we have approximately 322,000 active customers (defined as those that have purchased at least one item during the past 12 months). Our customers select desired products from MSC’s various publications and the MSC Websites and place their orders by telephone, the MSC Websites, eProcurement platforms or facsimile, and at times through direct communication with our outside sales associates.

Industry Overview

MSC operates in a large, fragmented industry characterized by multiple channels of distribution. We believe that there are numerous small retailers, dealerships and distributors that supply a majority of the market. The distribution channels in the MRO market include retail outlets, small distributorships, national, regional and local distributors, direct mail suppliers, large warehouse stores and manufacturers’ own sales forces.

Almost every industrial, manufacturing and service business has an ongoing need for MRO supplies. We believe that, except in the largest industrial plants, inventories for MRO supplies generally are not effectively managed or monitored, resulting in higher purchasing costs and increased administrative burdens. In addition, within larger facilities, such items are frequently stored in multiple locations, resulting in excess inventories and duplicate purchase orders. MRO items are also frequently purchased by multiple personnel in uneconomic quantities and a substantial portion of most facilities’ MRO supplies are generally “one-time purchases,” resulting in higher purchasing costs and time-consuming administrative efforts by multiple plant personnel.

2


 
 

TABLE OF CONTENTS

We believe that there are significant administrative costs associated with generating and manually placing a purchase order. Awareness of these high costs and purchasing inefficiencies has been driving large companies to streamline the purchasing process by utilizing a limited number of suppliers which are able to provide a broad selection of products, inventory management solutions, eCommerce procurement solutions, prompt delivery and superior customer service. Customized billing practices and report generation capabilities tailored to customer objectives are also becoming increasingly important to customers seeking to reduce costs, allowing such customers to significantly reduce the need for purchasing agents and administrative personnel. We believe that industry trends and economic pressures have caused customers to reduce their supplier base and move toward more efficient cost saving models, as those offered by premier companies, such as MSC.

Despite the inefficiencies of the traditional MRO purchasing process, long-standing relationships with local retailers and distributors have generally perpetuated the status quo. Due to limited capital availability, eCommerce capabilities and operating leverage, smaller suppliers to the industrial market have been experiencing increasing pressure to consolidate and/or curtail services and certain product lines in order to remain competitive. We believe that the relative inability of these smaller, more traditional distribution channels to respond to these changing industry dynamics has created a continuing opportunity for the growth of larger distributors with the financial strength, skills, eCommerce capabilities and resources of larger distributors such as MSC. As a result of these dynamics, we continue to capture an increased share of sales by providing lower total purchasing costs, broader product selection and a higher level of service to our customers.

We provide a low cost solution to the purchasing inefficiencies and high costs described above. Customers that purchase products from us will generally find that their total purchasing costs, including shipping, inventory investment and carrying costs, administrative costs and internal distribution costs are reduced. We achieve these reduced costs through the following:

consolidation of multiple sources of supply into fewer suppliers;
consolidation of multiple purchase orders into a single purchase order;
consolidation of multiple invoices into a single invoice;
significant reduction in tracking of invoices;
significant reduction in stocking decisions;
reduction of purchases for inventory;
reduction in out-of-stock situations for our customers;
eCommerce and eProcurement integration capabilities; and
inventory management solutions including VMI, CMI and vending solutions.

Business Strategy

Our business strategy is to reduce our customers’ total cost for obtaining, using, and maintaining their MRO supplies with superior customer service and value-added offerings. The strategy includes the following key elements:

providing a full suite of inventory management solutions, services and skills to reduce the total cost of procuring, using and disposing of inventory;
providing a broad selection of in-stock products including national industry brands and brands exclusive to MSC;
providing prompt response, same-day shipping, and next-day delivery;
delivering superior, “one call does it all” customer service and technical support;
providing a unique specialized technical process to optimize our customers’ tooling usage;
using advanced technologies to reduce procurement costs; and

3


 
 

TABLE OF CONTENTS

offering competitive pricing that reflects our value offering.

Inventory Management Solutions.  Our inventory management solutions approach starts with the understanding that a proper customer assessment is critical to determining the service or group of services that will best meet our customers’ needs. Through our associates and their expertise with managing inventory solutions, we are able to develop and recommend solutions that provide a value driven response. Solution options, that are customized to address customer size, complexity and processes as well as specific product, technical and cost targets, might include one or several of e-Procurement, CMI, VMI, Vending, Crib Control, or part time or full time On-Site Resources. The success of each customer engagement is optimized by our world class sourcing, logistics and business systems that provide predictable, reliable and scalable service.

Broad Selection of Products.  Our customers are increasingly purchasing from fewer suppliers to reduce the administrative burden of ordering from multiple sources. We believe that our ability to offer customers a broad spectrum of industry and private brand and generic MRO products and a “good-better-best” product selection alternative has been critical to our success. We offer products with varying degrees of brand name recognition, quality and price, thus permitting the customer to choose the appropriate product based on cost, quality and the customer’s specific needs. Excluding BDNA, we offer approximately 685,000 SKUs that are generally in stock and available for immediate shipment, and we aim to provide a broad range of merchandise in order to become our customers’ preferred supplier of MRO products.

Same-Day Shipping and Next-Day Delivery.  Excluding BDNA, we guarantee same-day shipping of our in-stock products, which represent most of our product offering. This prompt fulfillment and delivery allows customers to reduce the administrative burden of dealing with many suppliers and reduces their inventory investment and carrying costs. We fulfill our same-day shipment guarantee approximately 99% of the time. Historically, our results indicate that areas accessible by next-day delivery generate significantly greater sales than areas where next-day delivery is not available. Excluding BDNA, we offer a nationwide cutoff time of 8:00 P.M. Eastern Time on qualifying orders, which will be delivered to the customer the next-day at no additional cost over standard MSC ground delivery charges.

Superior Customer Service.  Customer service is a key element in becoming a customer’s preferred provider of MRO supplies. Our commitment to customer service is demonstrated by our investment in sophisticated information systems and extensive training of our associates. Utilizing our proprietary customer support software, MSC’s in-bound sales representatives implement the “one call does it all” philosophy. In-bound sales representatives are able to inform customers on a real-time basis of the availability of a product, recommend substitute products, verify credit information, receive special, custom or manufacturer direct orders, cross-check inventory items using customer product codes previously entered into our information systems and arrange or provide technical assistance. We believe that our simple, “one call does it all” philosophy of fulfilling all purchasing needs of a customer through highly trained customer service representatives, supported by our proprietary information systems, results in greater efficiency for customers and increased customer satisfaction. To complement our customer service, we seek to ease the administrative burdens on our customers by offering customized billing services, customer savings reports and other customized report features, electronic data interchange ordering, eCommerce capabilities, bulk discounts and stocking of specialty items specifically requested by customers.

We also offer our customers technical support in our value-added solutions for their diverse procurement needs, as well as customized one-on-one service through our field or telemarketing sales representatives. We continue to develop our technical support capabilities in order to better serve our customers. Our customers recognize the value of a distributor that can provide technical support to improve their operations and productivity. We deliver this support through a field-based team of metalworking specialists that provide on-site technical applications support for our customers. In addition, we have centralized technical support teams that can provide over the phone and email support to both our sales teams and customers on metalworking and MRO products and applications.

Commitment to Technological Innovation.  We take advantage of technological innovations to support growth, improve customer service and reduce our operating costs through more effective buying practices, automated inventory replenishment and efficient order fulfillment operations. MSC’s proprietary software tracks all of the SKUs available on the MSC Websites (excluding BDNA, approximately 685,000 SKUs) and

4


 
 

TABLE OF CONTENTS

enables the customer and the sales representatives to determine the availability of products in stock on a real-time basis and to evaluate alternative products and pricing. The MSC Websites contain a searchable online catalog with electronic ordering capabilities designed to take advantage of the opportunities created by eCommerce. The MSC Websites offer a broad array of products, services, workflow management tools and related information to meet the needs of customers seeking to reduce process costs through eCommerce-enabled solutions. Our information systems have been designed to enhance inventory management and turnover, customer service and cost reduction for both MSC and our customers. In addition to internal and customer information systems, we continually upgrade our distribution methods and systems to improve productivity and efficiency. We also provide comprehensive electronic ordering capabilities (“EDI” and “XML”) to support our customers’ purchase order processing. We continue to invest in inventory management solutions with our VMI, CMI, and vending solutions. These solutions enable our customers to streamline their replenishment processes for products and lower their overall procurement costs by maintaining lower inventory levels at their sites, reducing consumption, and providing product accountability. The vending solutions also broaden the range of products customers may purchase from MSC, as customers with vending solutions often choose to also reduce their overall number of vendors. MSC’s vending solutions include different kinds of machines such as storage lockers or carousels, that can stand alone or be combined with other machines. They use network or web-based software to enable customers to manage inventory throughout their production areas.

Advanced Technologies and www.mscdirect.com.  We offer advanced technologies that reduce customers’ acquisition costs for MRO supplies. These programs include solutions such as vending, VMI, CMI, eCommerce, eProcurement, and workflow management tools. Industrial vending solutions specifically are becoming increasingly valued by our customers as they focus on improving their operations, cost control and vendor consolidation. These solutions can accommodate a range of products from precision cutting tools to MRO supplies. We will continue to invest in our vending program in support of our overall growth strategy as well as our goal to support the identified needs of our customers. The MSC Websites are available 24 hours a day, seven days a week, providing personalized real-time inventory availability, superior search capabilities, online bill payment, delivery tracking status and a number of other enhancements, including work flow management tools. The user-friendly search engine allows customers to search for SKUs by keyword, part description, competitive part number, vendor number or brand. We believe the MSC Websites are a key component of our strategy to reduce customers’ transaction costs and internal requisition time. Many large customer accounts transact business with MSC using eProcurement solution providers that sell a suite of eCommerce products designed to meet the needs of businesses seeking reduced procurement costs and increased effectiveness of their MRO/direct materials ordering process by using Internet-enabled solutions. We have associations with many of these providers, including ARIBA (now part of SAP), Perfect Commerce, Oracle, and SAP. We continue to evaluate and expand our eProcurement capabilities, as the needs of our customers grow.

Competitive Pricing.  Customers are increasingly evaluating their total cost of procurement of which pricing is a component. We offer market competitive pricing to our customers reflective of the service level and solutions we provide in reducing the customers overall procurement costs.

Growth Strategy

Our goal is to become the preferred supplier of MRO supplies for businesses throughout North America. We continue to implement our strategies to gain market share against other suppliers, generate new customers, increase sales to existing customers, and diversify our customer base by:

expanding government and national account programs;
expanding our direct sales force and increasing their productivity;
expanding and enhancing our metalworking capabilities to aggressively penetrate customers in heavy and light manufacturing;
increasing sales from existing customers and generating new customers by offering various value-added programs designed to reduce our customers’ supply chain costs, including vendor and customer managed inventory, along with point-of-use vending;
expanding our product lines, including the addition of new products and private brand alternatives;

5


 
 

TABLE OF CONTENTS

improving our direct marketing programs;
enhancing our eCommerce capabilities;
improving our excellent customer support service and technical support capabilities; and
selectively pursuing strategic acquisitions.

Expanding government and national account programs.  We have developed government and national account programs to meet the specific needs of these types of customers. We believe that significant growth opportunities exist within these types of customers and that they are an integral part of our core growth and customer diversification program. Allocating resources to these customers has allowed us to provide better support and expand our customer acquisition and penetration activities, as this is a key component in our overall growth strategy.

Increasing the size and improving the productivity of our direct sales force.  We believe that increasing the size of our sales force, providing high levels of customer service and improving sales force productivity can have a positive effect on our sales per customer. The focus is to enable our sales force to spend more time with our customers and provide increased support during the MRO purchasing process thereby capturing more of their MRO spend. In fiscal 2013, our in-bound sales force totaled 1,121 associates. We believe that continued investment in our sales force enables us to increase our market share, and we will continue to do so.

Expanding and enhancing our metalworking capabilities to aggressively penetrate customers in heavy and light manufacturing.  Our goal is to become the preferred distributor of choice for our customers’ metalworking needs. We intend to accomplish this through continued expansion of our metalworking sales team, increased technical support, and enhanced supplier relationships. In addition, we will continue to develop and introduce value-added solutions, services and products to support the identified needs of our customers. Our product focus will include the continued development of high performance metalworking products marketed under MSC proprietary brand platforms as well as leading industry brands. We will continue to drive high value product alternatives for our customers. Through this combined focus, we seek to gain market share with existing customers and attract new customers for metalworking products.

Increasing sales from existing customers and generating new customers with various value-added programs.  In order to increase sales to existing customers and generate new customers, we offer value-added programs that reduce customers’ acquisition costs for MRO supplies. Value-added programs include business needs analysis, inventory management solutions such as vending, VMI, CMI, eCommerce, training, and workflow management tools. Industrial vending solutions specifically are becoming increasingly valued by our customers as they focus on improving their operations, cost control and vendor consolidation. These solutions can accommodate a range of products from precision cutting tools to MRO supplies. We will continue to invest in our vending program in support of our overall growth strategy as well as our goal to support the identified needs of our customers.

Increasing the number of product lines and productive SKUs.  We believe that increasing the breadth and depth of our product offerings and removing non-value-added SKUs is critical to our continued success. In addition, we are focused on providing our customers with new product alternatives that will help them achieve their cost savings objectives while meeting their demands for higher quality products. All of the following SKU metrics exclude BDNA. In fiscal 2013, through the MSC catalog, we added approximately 19,500 SKUs and removed approximately 17,400 SKUs. In fiscal 2014, in the MSC catalog distributed in September 2013, we added approximately 18,000 new SKUs and removed approximately 12,250 SKUs. Approximately 22% of the new SKUs are MSC private brands. SKUs are primarily removed as they are consolidated to other items providing our customers equal or higher value and are consistent with our margin expansion initiatives. Our objective is to continuously and significantly increase the number of SKUs available to our customers through our eCommerce, telesales and catalog channels. In fiscal year 2013, we added approximately 90,000 new SKUs to our ordering database bringing MSC’s total active, saleable SKU count to approximately 1,025,000. In addition, we increased the number of new SKUs available on www.mscdirect.com

6


 
 

TABLE OF CONTENTS

by approximately 100,000. After the impact of SKU removals, our total SKUs available for order via the web is approximately 685,000. We expect this SKU expansion plan through our eCommerce channels to continue throughout fiscal 2014.

Improving our direct marketing programs.  Through our marketing efforts, we have accumulated an extensive buyer database and industry expertise within specific markets. We utilize empirical information from our marketing database to prospect for new customers and target the circulation of our master catalogs to those most likely to purchase. We supplement our master catalogs with direct mail, online digital catalogs, search engine marketing, and email to further increase customer response and product purchases. Industry specific expertise is used to target customer growth areas and focus sales and marketing campaigns.

Enhancing eCommerce capabilities.  MSC’s Websites are a proprietary business-to-business horizontal marketplace serving the Metalworking and MRO market and are supported by the complete MSC service model. All qualified orders placed online at mscdirect.com are backed by our same-day shipping guarantee, unless otherwise stated. The MSC Websites utilize the same highly trained sales force and support services as MSC’s traditional business, emphasizing MSC’s values of placing customers’ needs first. The MSC Websites are available 24 hours a day, seven days a week, providing personalized real-time inventory availability, superior search capabilities, online bill payment, delivery tracking status and a number of other enhancements, including work flow management tools. The user-friendly search engine allows customers to search for SKUs by keyword, part description, competitive part number, vendor number or brand. We believe the MSC Websites are a key component of our strategy to reduce customers’ transaction costs and internal requisition time. Most orders move directly from the customers’ desktop to our customer fulfillment center floor, removing human error, reducing handling costs and speeding up the transaction flow. MSC continues to evaluate the MSC Websites and solicit customer feedback, making on-going improvements targeted at ensuring that they remain premier websites in our marketplace. The marketing campaign of the MSC Websites continues to raise awareness and drive volume to the websites.

Many large customer accounts transact business with MSC using eProcurement solution providers that sell a suite of eCommerce products designed to meet the needs of businesses seeking reduced procurement costs and increased effectiveness of their MRO/direct materials ordering process by using Internet-enabled solutions. We have associations with many of these providers, including ARIBA (now part of SAP), Perfect Commerce, Oracle, and SAP. We continue to evaluate and expand our eProcurement capabilities, as the needs of our customers grow.

Improving our excellent customer support service.  Our goal is to anticipate our customers’ service needs. We are continuing to proactively expand the services that we provide and respond and build programs at customer requests. MSC’s “one call does it all” philosophy continues to be the cornerstone of our service model even as the complexity of the needs of our customers continues to grow. This focus on our customers’ needs provides a market differentiator, which enables us to retain existing customers and to grow our customer base. In addition, MSC employs customer comment cards, surveys and other proactive customer outreach tools to maintain an open line of communication with our customers. The feedback from these contact points is used to drive change and improvement that enhances the customer experience. We also continue to develop our technical support capabilities in order to better serve our customers. Our customers recognize the value of a distributor that can provide technical support to improve their operations and productivity.

Selectively pursuing strategic acquisitions.  We actively pursue strategic acquisitions that we believe will either expand or complement our business in new or existing markets or further enhance the value and offerings we are able to provide to our existing or future potential customers. The Company completed one acquisition, BDNA, during fiscal year 2013. We believe that the highly fragmented nature of the MRO supply industry will continue to provide acquisition opportunities. We expect that any future acquisitions will be financed with internally generated funds and/or additional debt.

Products

Our products represent a broad range of MRO products that include cutting tools; measuring instruments; tooling components; metalworking products; fasteners; flat stock; raw materials; abrasives; machinery hand and power tools; safety and janitorial supplies; plumbing supplies; materials handling products; power transmission components; and electrical supplies. We believe that by offering a large number of SKUs, we

7


 
 

TABLE OF CONTENTS

enable our customers to reduce the number of suppliers they use to meet their MRO needs, thereby reducing their costs. In this regard, we intend to continue to add new value-adding products to our existing product categories. Our assortment of products from multiple manufacturers at different price and quality levels, provides our customers a “good-better-best” product selection alternative. This value proposition provides similar product offerings with varying degrees of brand recognition, quality and price, which enables our customers to choose the appropriate product for a specific application on the most cost-effective basis. MSC seeks to distinguish itself from its competition by offering name brand, private brand, and generic products, as well as by offering significant depth in its core product lines, while maintaining competitive pricing.

Our in-bound sales representatives and technical support associates are trained to assist customers in making suitable cost-saving purchases. We believe this approach results in significant amounts of repeat business and is an integral part of our strategy to reduce our customers’ industrial supply costs.

We purchase substantially all of our products directly from approximately 3,000 suppliers, excluding BDNA. One supplier accounted for approximately 6%, 5%, and 5% of our total purchases in fiscal 2013, fiscal 2012, and fiscal 2011, respectively.

The BDNA acquisition not only strengthens MSC’s product offering in categories such as fasteners, fittings, and other maintenance consumables, it also brings best-in-class pre-planned assortments, of those products, in the package quantities, configurations, and installations found most desirable by customers.

Customer Fulfillment Centers

A significant number of our products are carried in stock. Approximately 80% of sales are fulfilled from our customer fulfillment centers or branch offices. Certain products, such as specialty or custom items and some very large orders, are shipped directly from the manufacturer. Our primary customer fulfillment centers are managed via computer-based SKU tracking systems and radio frequency devices that facilitate the location of specific stock items to make the selection process more efficient. We have invested significant resources in technology and automation to increase efficiency and reduce costs, and continually monitor our order fulfillment process. We currently utilize fourteen customer fulfillment centers for product shipment. Our primary customer fulfillment centers are located in or near Harrisburg, Pennsylvania; Atlanta, Georgia; Elkhart, Indiana and Reno, Nevada. In addition, we operate 10 smaller customer fulfillment centers in or near Reno, Nevada (2nd location); Hanover Park, Illinois; Dallas, Texas; Elizabethtown, Kentucky; Edison, New Jersey; Shelbyville, Kentucky; Wednesbury, United Kingdom; Edmonton, Canada; Beamsville, Canada and Moncton, Canada. During fiscal 2013, we began to build a new customer fulfillment center in Columbus, Ohio, in order to support our growth strategy and maintain our signature service model. We expect to complete construction and begin operation in the fall of 2014. We expect our investment in this facility will yield high returns as we more efficiently manage and expand our service volume.

Sales and Marketing

Our customers include a broad range of purchasers of industrial supply products, from individual machine shops, to Fortune 1000 companies, to government agencies. Our core business focuses on selling relatively higher margin, lower volume products, for which we had an average order size of approximately $403 in fiscal 2013, excluding BDNA. The acquisition of the BDNA business, which participates primarily in the Fastener and Class C (“Consumables”) product categories, significantly increases MSC’s presence in the VMI space. VMI involves not only the selling of the maintenance consumables by our associates, but also the management of appropriate stock levels for the customer, writing the necessary replenishment orders, putting away the stock, and maintaining a clean and organized inventory area.

We market to small, medium and large companies in a wide range of sectors, including, but not limited to, durable and non-durable goods manufacturing (which accounted for a substantial portion of our revenue in fiscal 2013), education, government and health care. We also have government and national account programs designed to address the needs of these customers.

Another focus area for our sales force is the execution of contracts with various federal, state, and local government agencies. These relationships are for MRO products and are well matched to MSC’s product breadth and depth. Federal government customers include large and small military bases, veterans’ hospitals, federal correctional facilities, the United States Postal Service, and the Department of Defense. In addition to

8


 
 

TABLE OF CONTENTS

the individual state contracts that MSC already has, we are also pursuing and are engaged in a number of state cooperatives that present MSC an opportunity to leverage a single relationship over numerous states and agencies.

Our national account program also includes large, Fortune 1000 companies as well as large privately-held companies, and international companies doing business in the U.S. The MSC value proposition is consistent with the procurement strategies of these companies as they attempt to reduce their supply base by partnering with suppliers that can serve their needs nationally and drive costs out of their supply chain while providing them a higher degree of visibility utilizing eCommerce and inventory management solutions such as mscdirect.com, VMI, CMI and vending solutions. We have identified hundreds of additional national account prospects and have given our sales team tools to ensure we are targeting and implementing programs with the companies that best fit the MSC model. One of the ways we are doing this is by creating and hosting a series of executive forums with customers and prospects to discuss the trends and challenges in the manufacturing supply chain. We believe these opportunities enable us to have productive conversations with customers and prospects that help strengthen our relationships and position MSC as an industry leader.

Typically, a customer’s industrial supply purchases are managed by several buyers within their organization responsible for different categories of products. In fiscal year 2013, we began to implement advanced analytics and the findings from an advanced buyer segmentation study to significantly increase the return on our direct marketing investments designed to acquire new customers and increase our share of business with current customers. While master catalogs, promotional catalogs and brochures continued to play an important role in our efforts, we accelerated a shift in our focus to search engine marketing, email marketing and online advertising in line with changes in our customers’ buying behavior. We use our own database of over three million contacts together with external mailing lists to target our offline and online investments to buyers with the highest likelihood to buy from MSC. By applying new analytics and moving expenditures to more efficient online tactics, we reduced publication circulation while significantly increasing revenue contribution. We continue to produce our catalogs and promotional publications in-house to lower our costs and ensure the most efficient use of advertising space for our suppliers.

Our sales representatives are highly trained individuals who build relationships with customers, assist customers in reducing costs, provide technical support, coordinate special orders and shipments with vendors and update customer account profiles in our information systems databases. Our “one call does it all” philosophy is predicated on the ability of the sales representative, utilizing our information systems’ comprehensive databases as a resource, to respond effectively to the customer’s needs. When a customer places a call to MSC, the sales representative taking the call has immediate access to that customer’s company and specific buyer profile, as well as inventory levels by the customer fulfillment center on all of the SKUs offered by MSC. The customer’s profile includes historical and current billing information, historical purchasing information and plant and industry information.

Our in-bound sales representatives at our call centers undergo an intensive eight-week training course, are required to attend regular on-site training seminars and workshops, and are monitored and evaluated at regular intervals. Additionally, the sales representatives are divided into teams that are evaluated monthly and monitored on a daily basis by team supervisors. Sales representatives receive technical training regarding various products from vendors and in-house training specialists. We also maintain a separate technical support group dedicated to answering specific customer inquiries, assisting customers with the operation of products and finding the most efficient solutions to manufacturing problems. We entered into an exclusive agreement with ToolingU, a company of the Society of Manufacturing Engineers, to create certified online training for MSC associates, who are already among the industry’s most highly trained metalworking specialists.

As of August 31, 2013, we had 1,790 field sales representatives (including U.K., and Mexico operations and 667 associates added as a result of the BDNA acquisition) who work out of the branches and generate a significant portion of our sales. They are responsible for increasing sales per customer and servicing existing customers. The sales representatives accomplish this by communicating our product offering, distribution capabilities, customer service models and value-added programs directly to the customer. These associates are a touch-point to the customer and provide the organization with feedback on the competitive landscape and purchasing trends, which contributes to customer service improvements.

9


 
 

TABLE OF CONTENTS

Branch Offices

We currently operate 105 branch offices. There are 103 branch offices within the United States located in 41 states, and one location in each of the United Kingdom and Mexico. We have experienced higher sales growth and market penetration in areas where we have established a branch office and believe our branch offices are important to the success of our business strategy of obtaining and penetrating new and existing accounts. There were no branch openings during fiscal 2013.

Publications

Our primary reference publications are our master catalogs, which are supported by specialty, and promotional catalogs and brochures. MSC produces two annual catalogs: the MSC Big Book, which contains a comprehensive offering across all product lines, and the MSC Metalworking catalog, which is focused on our metalworking product offering along with a broad range of ancillary products. We use specialty and promotional publications to target customers in specific areas, such as metal fabrication, facilities management, safety and janitorial. We distribute specialty and promotional catalogs and brochures based on information in our databases and purchased mailing lists of customers whose purchasing history or profile suggests that they are most likely to purchase according to specific product categories or product promotions. Consequently, specialty catalogs offer a more focused selection of products at a lower catalog production cost and more efficient use of advertising space.

MSC’s in-house marketing staff primarily designs and produces all of our catalogs and brochures. Each publication contains photographs, detailed product descriptions and a toll-free telephone number and website address to be used by customers to place a product order. In-house production helps reduce overall expense and shortens production time, allowing us the flexibility to alter our product offerings and pricing and refine our catalogs and brochures more quickly.

While the circulation volume has decreased as part of an ongoing strategy to improve direct marketing productivity and increase overall return on advertising dollars spent, the quantity mailed from year to year may fluctuate as we develop programs to target greater product penetration at existing customers, acquire new customers, and develop new industry sectors.

     
  Fiscal Years Ended
     August 27,
2011
(52 weeks)
  September 1,
2012
(53 weeks)
  August 31,
2013
(52 weeks)
Number of publication titles     111       100       95  
Number of publications mailed     18,600,000       18,032,000       16,308,000  

Customer Service

One of our goals is to make purchasing our products as convenient as possible. Since a large quantity of customer orders are placed by telephone, the efficient handling of calls is an extremely important aspect of our business. Order entry and fulfillment occurs at each of our branches and our main call centers, mostly located at our customer fulfillment centers. Calls are received by customer service phone representatives who utilize online terminals to enter customer orders into computerized order processing systems. In general, our telephone ordering system is flexible and in the event of a local or regional breakdown, it can be re-routed to alternative locations. When an order is entered into the system, a credit check is performed; if the credit is approved, the order is generally electronically transmitted to the customer fulfillment center closest to the customer where the order is shipped. We believe that our relationships with all of our freight carriers are satisfactory. Customers are invoiced for merchandise, shipping and handling promptly after shipment.

Information Systems

Excluding BDNA, our information systems allow centralized management of key functions, including communication links between customer fulfillment centers, inventory and accounts receivable management, purchasing, pricing, sales and distribution, and the preparation of daily operating control reports that provide concise and timely information regarding key aspects of our business. These systems enable us to ship to customers on a same-day basis, respond quickly to order changes, provide a high level of customer service, achieve cost savings, deliver superior customer service and manage our operations centrally. Our eCommerce

10


 
 

TABLE OF CONTENTS

environment is built upon a combined platform of our own intellectual property, state of the art software components from the world’s leading internet technology providers and world class product data. This powerful combination of resources allows us to deliver an unmatched online shopping experience to our customers with extremely high levels of reliability and resiliency.

Most of our information systems operate over a wide area network and are real-time information systems that allow each customer fulfillment center and branch office to share information and monitor daily progress relating to sales activity, credit approval, inventory levels, stock balancing, vendor returns, order fulfillment and other measures of performance. We maintain a sophisticated buying and inventory management system that monitors all of our SKUs and automatically purchases inventory from vendors for replenishment based on projected customer ordering models. We also maintain an Electronic Data Interchange (“EDI”) purchasing program with our vendors with the objective of allowing us to place orders more efficiently, reduce order cycle processing time, and increase the accuracy of orders placed.

In addition to developing the proprietary computer software programs for use in the customer service and distribution operations, we also provide a comprehensive EDI and an Extensible Markup Language (“XML”) ordering system to support our customer based purchase order processing. We provide product information and ordering capabilities on the Internet. We also maintain a proprietary hardware and software platform in support of our VMI program which allows customers to integrate scanner-accumulated orders directly into our Sales Order Entry system. Our CMI program allows our customers to simply and effectively replenish inventory, by submitting orders directly to our website. Our customized vending systems are used by our customers in manufacturing plants across the U.S. to help them achieve supply chain and shop floor optimization, through inventory management and reduced tooling and labor costs. Our VMI, CMI and vending capabilities function directly as front-end ordering systems for our E-portal based customers. These solutions take advantage of advanced technologies built upon the latest innovations in wireless and cloud based computing.

Excluding BDNA, our core systems run in a highly distributed computing environment and utilize world class software and hardware platforms from key partners like IBM, SAP and Oracle. We utilize disaster recovery techniques and procedures, which are adequate to fulfill our needs and are consistent with best practices in enterprise IT. Our core systems are architected to be highly scalable and sufficient to sustain our present operations and our anticipated growth for the foreseeable future.

With the advent of advanced mobile technologies such as smart phones and tablets, access to information and decision making can now be made anytime, anywhere. Recognizing this need, we have deployed technology to securely manage and maintain access to enterprise information from mobile devices that meet our security standards. Our sales force is equipped with proprietary mobile technology that allows them to tap into the power of MSC’s supply chain directly from our customer’s manufacturing plants to make sure that critical inventory is always on site and available. In addition, we are enhancing our customer web sites and portals to reflect this new mobile reality at a pace in line with customer adoption of mobile technology.

Competition

The MRO supply industry is a large, fragmented industry that is highly competitive. We face competition from traditional channels of distribution such as retail outlets, small dealerships, regional or national distributors utilizing direct sales forces, manufacturers of MRO supplies, large warehouse stores and larger direct mail distributors. We believe that sales of MRO supplies will become more concentrated over the next few years, which may make MRO supply distribution more competitive. Some of our competitors challenge us with a large variety of product offerings, financial resources, services or a combination of all of these factors. In the industrial products market, customer purchasing decisions are primarily based on one or more of the following criteria: price, product selection, product availability, technical support relationship, level of service and convenience. We believe we compete effectively on all such criteria.

Seasonality

During any given time period we may be impacted by our industrial customers’ plant shutdowns (particularly during the summer months or our fourth fiscal quarter). In fiscal years 2013 and 2012, we experienced a seasonality impact on our sales due to customers’ plant shutdowns, which was offset in fiscal 2013 by our acquisition in the third quarter of BDNA and in fiscal 2012 by the extra week in the fiscal fourth quarter.

11


 
 

TABLE OF CONTENTS

Compliance with Health and Safety and Environmental Protection Laws

Our operations are subject to and affected by a variety of federal, state, local and non-U.S. health and safety and environmental laws and regulations relating to the discharge, treatment, storage, disposal, investigation and remediation of certain materials, substances and wastes. We continually assess our compliance status and management of environmental matters in an effort to ensure our operations are in compliance with all applicable environmental laws and regulations.

Operating and maintenance costs associated with environmental compliance and management of sites are a normal, recurring part of our operations. With respect to all other matters that may currently be pending, in the opinion of management, based on our analysis of relevant facts and circumstances, compliance with applicable environmental laws is not likely to have a material adverse effect upon our capital expenditures, earnings or competitive position.

Associates

As of August 31, 2013, we employed 6,257 associates (6,133 full-time and 124 part-time associates), which includes our U.K., Mexico and Canada operations and represents a significant increase in associates since September 1, 2012 as a result of our acquisition of BDNA. No associate is represented by a labor union. We consider our relationships with associates to be good and have experienced no work stoppages.

Available Information

We file annual, quarterly and current reports, and other reports and documents with the Securities and Exchange Commission (the “SEC”). The public may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at Station Place, 100 F Street, N.E., Washington, D.C. 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC also maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The address of that website is http://www.sec.gov.

The Company’s Internet address is http://www.mscdirect.com. We make available on or through our investor relations page on our website, free of charge, our Annual Report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and beneficial ownership reports on Forms 3, 4, and 5 and amendments to those reports as soon as reasonably practicable after this material is electronically filed with or furnished to the SEC. We also make available, on our website, the charters of the committees of our Board of Directors and Management’s Code of Ethics, the Code of Business Conduct and Corporate Governance Guidelines pursuant to SEC requirements and New York Stock Exchange listing standards. Information on our website does not constitute a part of this Annual Report on Form 10-K.

ITEM 1A. Risk Factors

In addition to the other information in this Annual Report on Form 10-K, the following factors should be considered in evaluating the Company and its business. Our future operating results depend upon many factors and are subject to various risks and uncertainties. The known material risks and uncertainties which may cause our operating results to vary from anticipated results or which may negatively affect our operating results and profitability are as follows:

Our business depends heavily on the operating levels of our customers and the economic factors that affect them.

Many of the primary markets for the products and services we sell are subject to cyclical fluctuations that affect demand for goods and materials that our customers produce. Consequently, demand for our products and services has been and will continue to be influenced by most of the same economic factors that affect demand for and production of our customers’ products.

When, as occurred in the recent economic downturn, customers or prospective customers reduce production levels because of lower demand or tight credit conditions, their need for our products and services diminishes. Selling prices and terms of sale come under pressure, adversely affecting the profitability and the durability of customer relationships. Credit losses increase as well. Volatile economic and credit conditions also make it more difficult for distributors, as well as customers and suppliers, to forecast and plan future business activities.

12


 
 

TABLE OF CONTENTS

In addition, as various sectors of our industrial customer base face increased foreign competition, and in fact lose business to foreign competitors or shift their operations overseas in an effort to reduce expenses, we may face increased difficulty in growing and maintaining our market share and growth prospects.

We may encounter difficulties with acquisitions, which could harm our business.

We have completed several acquisitions of businesses, including our acquisition of BDNA completed in fiscal 2013, and we expect to continue to pursue strategic acquisitions that we believe will either expand or complement our business in new or existing markets or further enhance the value and offerings we are able to provide to our existing or future potential customers.

Acquisitions involve numerous risks and challenges, including the following:

diversion of management’s attention from the normal operation of our business;
potential loss of key associates and customers of the acquired companies;
difficulties managing and integrating operations in geographically dispersed locations;
the potential for deficiencies in internal controls at acquired companies;
increases in our expenses and working capital requirements, which reduce our return on invested capital;
lack of experience operating in the geographic market or industry sector of the acquired business; and
exposure to unanticipated liabilities of acquired companies.

To integrate acquired businesses, we must implement our management information systems, operating systems and internal controls, and assimilate and manage the personnel of the acquired operations. The difficulties of this integration may be further complicated by geographic distances. The integration of acquired businesses may not be successful and could result in disruption to other parts of our business.

Changes in our customer and product mix, or adverse changes to the cost of goods we sell, could cause our gross margin percentage to fluctuate, or decrease.

From time to time, we have experienced changes in our customer mix and in our product mix. Changes in our customer mix have resulted from geographic expansion, daily selling activities within current geographic markets, and targeted selling activities to new customers. Changes in our product mix have resulted from marketing activities to existing customers and needs communicated to us from existing and prospective customers as well as from business acquisitions. As our large account customer program sales grow, we will face continued pressures on maintaining gross margin because these customers receive lower pricing due to their higher sales volumes. In addition, our recent expansion of our vending program has placed pressure on our gross margin. There can be no assurance that we will be able to maintain our historical gross margins. In addition, we may also be subject to price increases from vendors that we may not be able to pass along to our customers.

We operate in a highly competitive industry.

The MRO supply industry, although consolidating, still remains a large, fragmented industry that is highly competitive. We face competition from traditional channels of distribution such as retail outlets, small dealerships, regional or national distributors utilizing direct sales forces, manufacturers of MRO supplies, large warehouse stores and larger direct mail distributors. We believe that sales of MRO supplies will become more concentrated over the next few years, which may make the industry more competitive. Our competitors challenge us with a greater variety of product offerings, financial resources, services or a combination of all of these factors. In addition, we also face the risk of companies which operate primarily outside of our industry entering our marketplace.

Our industry is consolidating which could cause it to become more competitive.

The business of selling MRO supplies in North America is currently undergoing some consolidation. This consolidation is being driven by customer needs and supplier capabilities, which could cause the industry to become more competitive as greater economies of scale are achieved by suppliers.

13


 
 

TABLE OF CONTENTS

Traditional MRO suppliers are attempting to consolidate the market through internal expansion, through acquisitions or mergers with other industrial and construction suppliers, or through a combination of both. This consolidation allows suppliers to improve efficiency and spread fixed costs over a greater number of sales, and to achieve other benefits derived from economies of scale.

Customers are increasingly aware of the total costs of fulfillment, and of their need to have consistent sources of supply at multiple locations. Consistent sources of supply provide not just reliable product quantities, but also consistent pricing, quality, and service capabilities. We believe these customer needs could result in fewer suppliers as the industry consolidates, and as the remaining suppliers become larger and capable of being a consistent source of supply.

The trend of our industry toward consolidation could make it more difficult for us to maintain our operating margins. There can be no assurance that we will be able to take advantage of the trend or that we can do so effectively.

Volatility in commodity and energy prices may adversely affect operating margins.

In times of commodity and energy price increases, we may be subject to price increases from our vendors and freight carriers that we may be unable to pass along to our customers. Raw material costs used in our vendors’ products (steel, tungsten, etc.) and energy costs may increase, which may result in increased production costs for our vendors. The fuel costs of our independent freight companies have been volatile. Our vendors and independent freight carriers typically look to pass increased costs along to us through price increases. When we are forced to accept these price increases, we may not be able to pass them along to our customers, resulting in lower operating margins.

As a United States government contractor, we are subject to certain laws and regulations which may increase our costs of doing business and which subject us to certain compliance requirements and potential liabilities.

As a supplier to the United States government, we must comply with certain laws and regulations, including the Trade Agreements Act, the Buy American Act and the Federal Acquisition Regulation, relating to the formation, administration and performance of United States government contracts. These laws and regulations affect how we do business with government customers, and in some instances, impose added compliance and other costs on our business. From time to time, we are subject to governmental or regulatory inquiries or audits relating to our compliance with these laws and regulations. A violation of specific laws and regulations could result in the imposition of fines and penalties or the termination of our United States government contracts and could harm our reputation and cause our business to suffer.

Our business is exposed to the credit risk of our customers which could adversely affect our operating results.

We perform periodic credit evaluations of our customers’ financial condition and collateral is generally not required. Receivables are generally due within thirty days. We evaluate the collectability of accounts receivable based on numerous factors, including past transaction history with customers and their credit worthiness and we provide a reserve for accounts that we believe to be uncollectible. A significant deterioration in the economy could have an adverse effect on the servicing of these accounts receivable, which could result in longer payment cycles, increased collection costs and defaults.

The risk of cancellation or rescheduling of orders may cause our operating results to fluctuate.

The cancellation or rescheduling of orders may cause our operating results to fluctuate. Although we strive to maintain ongoing relationships with our customers, there is an ongoing risk that orders may be cancelled or rescheduled due to fluctuations in our customers’ business needs or purchasing budgets, including changes in national and local government budgets. Additionally, although our customer base is diverse, ranging from individual machine shops to Fortune 1000 companies and large governmental agencies, the cancellation or rescheduling of significant orders by larger customers may still have a material adverse effect on our operating results from time to time.

Work stoppages and other disruptions, including those due to extreme weather conditions, at transportation centers or shipping ports may adversely affect our ability to obtain inventory and make deliveries to our customers.

Our ability to provide same-day shipping and next-day delivery of our core business products is an integral component of our overall business strategy. Disruptions at transportation centers or shipping ports, due

14


 
 

TABLE OF CONTENTS

to labor stoppages or severe weather conditions affect both our ability to maintain core products in inventory and deliver products to our customers on a timely basis, which may in turn adversely affect our customer relationships and results of operations. In addition, severe weather conditions could adversely affect demand for our products in particularly hard hit regions.

The terms of our credit facility impose operating and financial restrictions on us, which may limit our ability to respond to changing business and economic conditions.

We currently have a $650.0 million unsecured term loan and revolving loan credit facility, with the right to increase the aggregate amount available to be borrowed by an additional $200.0 million, in $50.0 million increments, subject to lending group approval. The term loan facility matures on, and the revolving loan facility is, available through April 22, 2018. We are subject to various operating and financial covenants under the credit facility which restrict our ability to, among other things, incur additional indebtedness, make particular types of investments, incur certain types of liens, engage in fundamental corporate changes, enter into transactions with affiliates or make substantial asset sales. Any failure to comply with these covenants may constitute a breach under the credit facility, which could result in the acceleration of all or a substantial portion of any outstanding indebtedness and termination of revolving credit commitments under the facility. Our inability to maintain our credit facility could materially adversely affect our liquidity and our business.

Disruptions of our information systems could adversely affect us.

We believe that our information technology (“IT”) systems are an integral part of our business and growth strategies. We depend upon our IT systems to help process orders, to manage inventory and accounts receivable collections, to purchase, sell and ship products efficiently and on a timely basis, to maintain cost-effective operations, to operate our website and to help provide superior service to our customers. Our IT systems may be vulnerable to damage or disruption caused by circumstances beyond our control, such as catastrophic events, power outages, natural disasters, computer system or network failures, computer viruses, physical or electronic break-ins, and cyber-attacks. The failure of our IT systems to perform as we anticipate could disrupt our business and could result in transaction errors, loss of data, processing inefficiencies, downtime, litigation, substantial remediation costs (including potential liability for stolen assets or information and the costs of repairing system damage), and the loss of sales and customers. Any one or more of these consequences could have a material adverse effect on our business, financial condition and results of operations.

Our success is dependent on certain key personnel.

Our success depends largely on the efforts and abilities of certain key senior management. The loss of the services of one or more of such key personnel could have a material adverse effect on our business and financial results. We do not maintain any key-man insurance policies with respect to any of our executive officers.

Our business depends on our ability to retain and to attract qualified sales and customer service personnel.

There are significant costs associated with hiring and training sales and customer service professionals. We greatly benefit from having associates who are familiar with the products we sell and their applications, as well as with our customer and supplier relationships. We could be adversely affected by a shortage of available skilled workers or the loss of a significant number of our sales or customer service professionals.

The loss of key suppliers or supply chain disruptions could adversely affect our operating results.

We believe that our ability to offer a combination of well-known brand name products and competitively priced private brand products is an important factor in attracting and retaining customers. Our ability to offer a wide range of products and services is dependent on obtaining adequate product supply and services from our key suppliers. The loss of, or a substantial decrease in the availability of products or services from key suppliers at competitive prices, or the loss of a key brand could cause our revenues and profitability to decrease. In addition, supply interruptions could arise due to transportation disruptions, labor disputes or other factors beyond our control. Disruptions in our supply chain could result in a decrease in revenues and profitability.

Opening or expanding our customer fulfillment centers or customer service centers exposes us to risks of delays and may affect our operating results.

In the future, as part of our long term strategic planning, we may open new customer fulfillment centers to improve our efficiency, geographic distribution and market penetration and intend to make, as we have in the past,

15


 
 

TABLE OF CONTENTS

capital improvements and operational enhancements to certain of our existing customer fulfillment centers. Moving or opening customer fulfillment centers and effecting such improvements requires a substantial capital investment, including expenditures for real estate and construction, and opening new customer fulfillment centers requires a substantial investment in inventory. In addition, the opening of new customer fulfillment centers will have an adverse impact on distribution expenses as a percentage of sales, inventory turnover and return on investment in the periods prior to and for some time following the commencement of operations of each new customer fulfillment center. Additionally, until sales volumes mature at new customer fulfillment centers, operating expenses as a percentage of sales may be adversely impacted. Further, substantial or unanticipated delays in the commencement of operations at new customer fulfillment centers could have a material adverse effect on our geographic expansion and may impact results of operations.

In order to support our growth strategy and maintain our signature service model as we grow, during fiscal year 2013, we began to build a new customer fulfillment center in Columbus, Ohio. We expect to invest approximately $55.0 million in capital expenditures which includes the purchase of the land and costs to construct and outfit the facility in Columbus. We spent approximately $6.4 million in capital expenditures on the fulfillment center in fiscal 2013 and the remaining expenditures are expected to be spent in fiscal 2014. We expect to complete construction and begin operation in the fall of 2014.

An interruption of operations at our headquarters or customer fulfillment centers could adversely impact our business.

Our business depends on maintaining operations at our co-located headquarters and customer fulfillment centers. A serious, prolonged interruption due to power outage, telecommunications outage, terrorist attack, earthquake, hurricane, fire, flood or other natural disaster, or other interruption could have a material adverse effect on our business and financial results.

We are subject to litigation risk due to the nature of our business, which may have a material adverse effect on our business.

From time to time, we are involved in lawsuits or other legal proceedings that arise from business transactions. These may, for example, relate to product liability claims, commercial disputes, or employment matters. In addition, we could face claims over other matters, such as claims arising from our status as a government contractor or corporate or securities law matters. The defense and ultimate outcome of lawsuits or other legal proceedings may result in higher operating expenses, which could have a material adverse effect on our business, financial condition, or results of operations.

We are subject to environmental, health and safety laws and regulations.

We are subject to federal, state, local, foreign and provincial environmental, health and safety laws and regulations. Fines and penalties may be imposed for non-compliance with applicable environmental, health and safety requirements and the failure to have or to comply with the terms and conditions of required permits. The failure by us to comply with applicable environmental, health and safety requirements could result in fines, penalties, enforcement actions, third party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup, or regulatory or judicial orders requiring corrective measures, which could have a material adverse effect on our business, financial condition, or results of operations.

We will need to begin disclosing our use of 'conflict minerals' in certain of the products we distribute, which will impose costs on us and could raise reputational and other risks.

Under the Dodd-Frank Wall Street Reform and Consumer Protection Act, the SEC established disclosure requirements regarding the use of certain minerals, known as 'conflict minerals', that are mined from the Democratic Republic of the Congo and adjoining countries. There are costs associated with complying with these disclosure requirements, including costs to determine which of our products are subject to the rules and the source of any 'conflict minerals' used in those products. In addition, these rules could adversely affect the sourcing, pricing and availability of materials used in the manufacture of certain of our products. Also, we may face reputational challenges if we determine that certain of our products contain minerals not determined to be conflict free or if we are unable to sufficiently verify the origins for all conflict minerals used in our products through the procedures we implement.

16


 
 

TABLE OF CONTENTS

Goodwill and indefinite life intangible assets recorded as a result of our acquisitions could become impaired.

As of August 31, 2013, our combined goodwill and indefinite life intangible assets amounted to $645.0 million. To the extent we do not generate sufficient cash flows to recover the net amount of any investments in goodwill and other indefinite life intangible assets recorded, the investment could be considered impaired and subject to write-off. We expect to record further goodwill and other indefinite life intangible assets as a result of future acquisitions we may complete. Future amortization of such assets or impairments, if any, of goodwill or indefinite life intangible assets would adversely affect our results of operations in any given period.

Our common stock price may be volatile.

We believe factors such as fluctuations in our operating results or the operating results of our competitors, changes in economic conditions in the market sectors in which our customers operate, notably the durable and non-durable goods manufacturing industry, which accounted for a substantial portion of our revenue for fiscal year 2013 and fiscal year 2012, and changes in general market conditions, could cause the market price of our Class A common stock to fluctuate substantially.

Our principal shareholders exercise significant control over us.

We have two classes of common stock. Our Class A common stock has one vote per share and our Class B common stock has ten votes per share. As of October 18, 2013, the Chairman of our Board of Directors, his sister, certain of their family members including our President and Chief Executive Officer, and related trusts collectively owned 100% of the outstanding shares of our Class B common stock and approximately 1.5% of the outstanding shares of our Class A common stock, giving them control over approximately 74.5% of the combined voting power of our Class A common stock and our Class B common stock. Consequently, such shareholders will be in a position to elect all of the directors of the Company and to determine the outcome of any matter submitted to a vote of the Company’s shareholders for approval, including amendments to our certificate of incorporation and our amended and restated by-laws, any proposed merger, consolidation or sale of all or substantially all of our assets and other corporate transactions. Because this concentrated control could discourage others from initiating any potential merger, takeover or other change of control transaction that may otherwise be beneficial to our business, the market price of our Class A common stock could be adversely affected.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None.

ITEM 2. PROPERTIES.

We have customer fulfillment centers in or near the following locations:

     
Location   Approx.
Sq. Ft.
  Operational
Date
  Leased/
Owned
Atlanta, Georgia     721,000       1990       Leased (1) 
Elkhart, Indiana     545,000       1996       Owned  
Harrisburg, Pennsylvania     637,000       1997       Owned  
Reno, Nevada     419,000       1999       Owned  
Wednesbury, United Kingdom     75,000       1998       Leased  
Reno, Nevada (BDNA location)     70,000       2001       Leased  
Hanover Park, Illinois (BDNA location)     112,000       2003       Leased  
Dallas, Texas (BDNA location)     103,000       2003       Leased  
Elizabethtown, Kentucky (BDNA location)     212,000       1971       Leased  
Edison, New Jersey (BDNA location)     89,000       1989       Leased  
Edmonton, Canada (BDNA location)     32,000       2007       Leased  
Beamsville, Canada (BDNA location)     110,000       2004       Owned  
Moncton, Canada (BDNA location)     16,000       1981       Owned  
Shelbyville, Kentucky (BDNA location)     110,000       1973       Owned  

17


 
 

TABLE OF CONTENTS

(1) The related party lease for this facility expires on July 1, 2030. This facility was expanded during fiscal 2010.

We maintain 103 branch offices within the United States located in 41 states and one location in each of the United Kingdom and Mexico. The branches range in size from 1,000 to 40,000 square feet. The leases for these branch offices will expire at various periods between October 2013 and December 2020. The aggregate annual lease payments on these branches and the leased customer fulfillment centers in fiscal 2013 were approximately $13.2 million.

We maintain our co-located headquarters at a 170,000 square foot facility that we own in Melville, New York and an 180,000 square foot facility that we own in Davidson, North Carolina. In addition, we maintain office space in a 50,000 square foot facility that we lease in Southfield, Michigan and a 138,000 square foot facility that we lease in Cleveland, Ohio. We believe that our existing facilities are adequate for our current needs and, together with the new facilities discussed below, will be adequate for the foreseeable future; we also expect that suitable additional space will be available as needed.

During the fourth quarter of fiscal year 2013, we opened the co-located headquarters in Davidson, North Carolina, in addition to our current location in Melville, New York in order to support our growth strategy.

On July 30, 2012, we announced plans to build a new customer fulfillment center in Columbus, Ohio, in order to support our growth strategy and maintain our signature service model as we grow. We purchased 70 acres of land in Columbus, and broke ground on an approximately 400,000 square foot facility during fiscal year 2013. We expect to complete construction and begin operation in the fall of 2014.

In an effort to further optimize our networks and help deliver on the value of the acquisition of BDNA, we will be transitioning a select number of BDNA customer fulfillment centers to our primary customer fulfillment centers over the course of the next 18 months in order to improve our operational efficiency and value to our customers.

ITEM 3. LEGAL PROCEEDINGS.

There are various claims, lawsuits, and pending actions against the Company incidental to the operation of its business. Although the outcome of these matters is currently not determinable, management does not expect that the ultimate costs to resolve these matters will have a material adverse effect on the Company’s consolidated financial position, results of operations, or liquidity.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

18


 
 

TABLE OF CONTENTS

PART II.

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

MSC’s Class A common stock is traded on the New York Stock Exchange (the “NYSE”) under the symbol “MSM.” MSC’s Class B common stock is not traded in any public market.

The following table sets forth the range of the high and low sales prices as reported by the NYSE and cash dividends per share for the period from August 28, 2011 to August 31, 2013:

     
  Price of Class A
Common Stock
  Dividend Per Share
Common Stock
Class A & Class B
Fiscal Year Ended August 31, 2013   High   Low
First Quarter – December 1, 2012   $ 74.60     $ 67.18     $ 0.30  
Second Quarter – March 2, 2013     86.54       70.30       0.30  
Third Quarter – June 1, 2013     87.79       76.33       0.30  
Fourth Quarter – August 31, 2013     84.62       76.00       0.30  

     
  Price of Class A
Common Stock
  Dividend Per Share
Common Stock
Class A & Class B
Fiscal Year Ended September 1, 2012   High   Low
First Quarter – November 26, 2011   $ 70.56     $ 56.13     $ 0.25  
Second Quarter – February 25, 2012     80.74       63.97       0.25  
Third Quarter – May 26, 2012     84.27       68.31       0.25  
Fourth Quarter – September 1, 2012     74.12       61.90       0.25  

  

On July 10, 2003, our Board of Directors instituted a policy of paying regular quarterly cash dividends to our shareholders. The Company paid a total annual cash dividend of $1.20 and $1.00 per share for fiscal 2013 and fiscal 2012, respectively. This policy is reviewed periodically by the Board of Directors.

On October 24, 2013, our Board of Directors declared a quarterly cash dividend of $0.33 per share payable on November 20, 2013 to shareholders of record at the close of business on November 6, 2013. The dividend will result in a payout of approximately $20.9 million, based on the number of shares outstanding at October 24, 2013.

On October 18, 2013, the last reported sales price for MSC’s Class A common stock on the NYSE was $80.67 per share. The approximate number of holders of record of MSC’s Class A common stock as of October 18, 2013 was 539. The number of holders of record of MSC’s Class B common stock as of October 18, 2013 was 40.

Purchases of Equity Securities

The following table sets forth repurchases by the Company of its outstanding shares of Class A common stock, during the quarter ended August 31, 2013:

       
Period   Total Number of Shares Purchased(1)   Average Price Paid Per Share(2)   Total Number of
Shares Purchased as
Part of Publicly
Announced Plans or
Programs(3)
  Maximum Number of
Shares that May Yet
Be Purchased Under
the Plans or
Programs
06/02/13 – 07/01/13         $             4,383,970  
07/02/13 – 08/01/13     1,280       79.38             4,383,970  
08/02/13 – 08/31/13     195       80.06             4,383,970  
Total     1,475     $ 79.47              

(1) During the three months ended August 31, 2013, 1,475 shares of our common stock were purchased by the Company as payment to satisfy our associate’s tax withholding liability associated with our share-based compensation program and are included in the total number of shares purchased.
(2) Activity is reported on a trade date basis and includes commission paid.

19


 
 

TABLE OF CONTENTS

(3) During fiscal 1999, our Board of Directors established the MSC Stock Repurchase Plan, which we refer to as the “Repurchase Plan”. The total number of shares of our Class A common stock initially authorized for future repurchase was set at 5,000,000 shares. On January 8, 2008, our Board of Directors reaffirmed and replenished the Repurchase Plan and set the total number of shares of Class A common stock authorized for future repurchase at 7,000,000 shares. On October 21, 2011, the Board of Directors reaffirmed and replenished the Repurchase Plan and set the total number of shares of Class A common stock authorized for future repurchase at 5,000,000 shares. As of August 31, 2013, the maximum number of shares that may yet be repurchased under the Repurchase Plan was 4,383,970 shares. There is no expiration date for the Repurchase Plan.

Performance Graph

The following stock price performance graph and accompanying information is not deemed to be “soliciting material” or to be “filed” with the SEC, nor shall such information be incorporated by reference into any filings under the Securities Act of 1933, as amended, or under the Securities Exchange Act of 1934, as amended, which we refer to as the Exchange Act, or be subject to the liabilities of Section 18 of the Exchange Act, regardless of any general incorporation language in any such filing.

The following graph compares the cumulative total return on an investment in our common stock with the cumulative total return of an investment in each of the S&P Midcap 400 Index and The Dow Jones US Business Support Services Index. The graph assumes $100 invested at the closing price of our Class A common stock on the New York Stock Exchange and each index on August 30, 2008 and assumes that all dividends paid on such securities during the applicable fiscal years were reinvested. Indices are calculated on a month-end basis. The comparisons in this table are based on historical data and are not intended to forecast or to be indicative of the possible future performance of our Class A common stock.

Cumulative Total Stockholder Return
for the Period from August 30, 2008 through August 31, 2013

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among MSC Industrial Direct Co., Inc., the S&P Midcap 400 Index,
and the Dow Jones US Business Support Services Index

[GRAPHIC MISSING]

* $100 invested on 8/30/08 in stock or 8/31/08 in index, including reinvestment of dividends. Indexes calculated on month-end basis.

Copyright© 2013 S&P, a division of The McGraw-Hill Companies Inc. All rights reserved.

20


 
 

TABLE OF CONTENTS

           
  8/30/08   8/29/09   8/28/10   8/27/11   9/1/12   8/31/13
MSC Industrial Direct Co., Inc.     100.00       80.28       94.14       124.29       148.09       165.04  
S&P Midcap 400     100.00       81.83       91.54       112.50       126.84       156.91  
Dow Jones US Business Support Services     100.00       79.35       81.16       104.77       124.49       158.35  

* Source: Research Data Group, Inc.
ITEM 6. SELECTED FINANCIAL DATA.

The following selected financial information is qualified by reference to, and should be read in conjunction with, the Company’s consolidated financial statements and the notes thereto, and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” contained elsewhere herein. The selected consolidated income statement data for the fiscal years ended August 27, 2011, September 1, 2012 and August 31, 2013 and the selected consolidated balance sheet data as of September 1, 2012 and August 31, 2013 are derived from MSC’s audited consolidated financial statements which are included elsewhere herein. The selected consolidated income statement data for the fiscal years ended August 29, 2009 and August 28, 2010 and the selected consolidated balance sheet data as of August 29, 2009, August 28, 2010, and August 27, 2011 are derived from MSC’s audited consolidated financial statements not included herein.

         
  Fiscal Years Ended
     August 29, 2009
(52 weeks)
  August 28, 2010
(52 weeks)
  August 27, 2011
(52 weeks)
  September 1, 2012
(53 weeks)
  August 31, 2013
(52 weeks)
       (In thousands, except per share data)
 
Consolidated Income Statement Data:
                                            
Net sales   $ 1,489,518     $ 1,692,041     $ 2,021,792     $ 2,355,918     $ 2,457,649  
Gross profit     687,845       766,939       940,925       1,078,203       1,118,516  
Operating expenses     483,127       525,120       591,160       665,987       732,990  
Income from operations     204,718       241,819       349,765       412,216       385,526  
Income taxes     76,818       90,455       130,544       153,111       145,434  
Net income     125,122       150,373       218,786       259,031       237,995  
Net income per common share:
                                            
Basic(2)     2.01       2.39       3.45       4.12       3.77  
Diluted(2)     1.99       2.37       3.43       4.09       3.75  
Weighted average common shares outstanding:
                                            
Basic(2)     61,798       62,438       62,902       62,434       62,695  
Diluted(2)     62,362       62,930       63,324       62,803       63,011  
Cash dividends declared per common share(3)   $ 0.80     $ 0.82     $ 1.88     $ 1.00     $ 1.20  
Consolidated Balance Sheet Data (at period end):
                                            
Working capital   $ 426,876     $ 486,251     $ 586,232     $ 749,596     $ 679,910  
Total assets     1,157,547       1,153,323       1,244,423       1,444,876       1,943,003  
Short-term debt including capital lease and financing obligations     154,105       39,361             1,007       14,184  
Long-term debt including capital lease obligations, net of current maturities     39,365                   2,189       241,566  
Deferred income taxes and tax uncertainties     56,808       63,158       79,109       85,061       97,475  
Shareholders’ equity     805,536       899,880       993,112       1,187,111       1,390,383  
Selected Operating Data:(1), (4)
                                            
Active customers     343       320       320       325       322  
Approximate Number of SKUs     600       600       600       600       685  
Orders entered     5,034       5,309       5,784       6,150       5,957  
Number of publications mailed     28,600       21,700       18,600       18,032       16,308  
Number of publication titles (not in thousands)     120       110       111       100       95  

21


 
 

TABLE OF CONTENTS

(1) See “Management’s Discussion and Analysis of Financial Condition and Results of Operations —  General.”
(2) In the first quarter of fiscal 2010, the Company adopted authoritative guidance on “Determining Whether Instruments Granted in Share-Based Payment Transactions Are Participating Securities.” As a result, net income per share was calculated under the new accounting guidance for fiscal 2010 and prior period net income per share data presented has been adjusted retrospectively.
(3) In the first quarter of fiscal 2011, the Company paid a special cash dividend of $1.00 per share.
(4) Selected Operating Data excludes BDNA.
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

General

Our goal is to become the preferred supplier of MRO supplies for businesses throughout North America. We continue to implement our strategies to gain market share against other suppliers and generate new customers, increase sales to existing customers and diversify our customer base.

We offer approximately 685,000 stock-keeping units (“SKUs”), excluding BDNA, through our master catalogs; weekly, monthly and quarterly specialty and promotional catalogs; newspapers; brochures; and the Internet, including our websites, MSCDirect.com, MSCMetalworking.com and Use-Enco.com (the “MSC Websites”). We service our customers from 14 customer fulfillment centers and 105 branch offices. We employ one of the industry’s largest sales forces. Most of our products are carried in stock, and orders for these in-stock products are typically fulfilled the day on which the order is received. Excluding BDNA, we offer a nationwide cutoff time of 8:00 PM Eastern Time on qualifying orders for customers in the contiguous United States, which will be delivered to customers the next day at no additional cost over standard MSC ground delivery charges.

We experienced a slower sales growth rate for the fiscal year ended August 31, 2013, as compared to the 2012 fiscal year. For the fiscal years ended August 31, 2013 and September 1, 2012, net sales increased 4.3% (6.4% on an average daily sales basis) and 16.5% (14.3% on an average daily sales basis), respectively, over the 2012 and 2011 fiscal years. Fiscal year 2013 contained 52 weeks versus 53 weeks in fiscal year 2012. As discussed below, during the fiscal third quarter of 2013, we acquired substantially all of the assets and assumed certain liabilities of the North American distribution business (“BDNA”) of Barnes Group Inc. (“Barnes”). BDNA contributed $108.4 million of net sales for the fiscal year ended August 31, 2013. Our financial results for fiscal years 2013 and 2012 reflect execution of our growth strategies, including acquisitions, to increase revenues. We have also invested in our business by increasing our sales force, increasing our investment in vending solutions, making technology investments to improve our electronic procurement tools, and making productivity and infrastructure investments. These investments, combined with our strong balance sheet, extensive product assortment, high in-stock levels, same day shipping, and high levels of execution, have increased our competitive advantage over smaller distributors.

Key manufacturing measurements, such as the Institute for Supply Management (“ISM”) index, began to decline during our fiscal fourth quarter of 2012 and evidenced a contracting manufacturing sector environment by the end of our fiscal first quarter of 2013. However, throughout the remainder of fiscal year 2013, the trend stabilized into a range at around the 50.0% level, and began to increase in July 2013 to 55.4%, with the most recent ISM index in September 2013 of 56.2%. During this time, we experienced a disconnect between the ISM index and the core metalworking manufacturing sector that is more reflective of our business environment. In particular, metalworking related indices continued contracting during fiscal year 2013. This rate of contraction slowed during our fiscal fourth quarter.

Our sales growth in fiscal year 2013 was impacted by the instability in the overall manufacturing sector as well as by continued weakness in the metalworking manufacturing sector, which comprises our core business. We will continue to monitor the current economic conditions for its impact on our customers and markets and continue to assess both risks and opportunities that may affect our business. See the discussion below describing recent fluctuations in economic indicators and the possible impact on our future sales and margins.

22


 
 

TABLE OF CONTENTS

We continue to focus on expanding our Large Account Customer business, which consists of our government and national account customers and has become an important component of our overall customer mix, revenue base, and planned business expansion. Servicing this Large Account Customer business is more complex as we look to provide customer specific solutions as our Larger Account Customers continue to focus on ways to drive costs out of their businesses. By expanding this business, which involves customers with multiple locations and high volume MRO needs, we have diversified our customer base beyond small and mid-sized customers. However, sales to Federal and state government agencies continue to be constrained by the government spending environment. In addition to our focus on our Large Account Customer business, we continue to plan for increasing the number of sales associates in existing markets and new markets. However, we will manage the timing of sales force increases based on the economic conditions at the time. We have increased the number of field sales associates to 1,790 (including U.K., and Mexico operations and 667 associates added as a result of the BDNA acquisition) at August 31, 2013 compared to 1,095 (including U.K. and Mexico operations) at September 1, 2012.

Our gross profit margin decreased in fiscal year 2013 to 45.5% from 45.8% in fiscal 2012. The decrease in gross margin was primarily driven by increases in product costs, changes in customer and product mix and lower gross margins from our vending program, partially offset by higher gross margins from BDNA. Our gross profit margin decreased in fiscal 2012 to 45.8% from 46.5% in fiscal year 2011. This was driven by increases in product costs, changes in customer and product mix, and lower gross margins from acquired businesses and our vending program.

Operating expenses increased 10.1% and 12.7% in fiscal years 2013 and 2012, respectively, as compared to fiscal years 2012 and 2011. This increase is primarily a result of additional operating expenses incurred as a result of the acquired BDNA operations as well as non-recurring transaction and integration costs associated with the acquisition. We incurred operating expenses of approximately $11.6 million in fiscal year 2013 related to non-recurring transaction and integration costs. Excluding BDNA, operating expenses increased as a result of increased payroll and payroll related costs, costs associated with our investment programs, and costs related to the establishment of our new co-located headquarters in Davidson, North Carolina. We incurred non-recurring operating expenses of approximately $4.3 million and $1.2 million in fiscal years 2013 and 2012, respectively, related to the establishment of our new co-located headquarters in Davidson, North Carolina.

The increase in payroll and payroll related costs in fiscal year 2013, as compared to fiscal year 2012 is primarily a result of the additional expenses incurred as a result of the BDNA acquisition, additional sales associate headcount and increased fringe benefit costs. The increase in payroll and payroll related costs in fiscal year 2012, as compared to fiscal year 2011 is also primarily a result of the additional sales associate headcount and increased fringe benefit costs. Medical costs of our self-insured group health plan increased in fiscal years 2013 and 2012 as compared to the prior years as a result of an increase in the number of participants in the plan as well as an increase in the number of medical claims filed by participants. In fiscal year 2013 as compared to fiscal year 2012, the average cost per claim also increased.

Our income from operations as a percentage of net sales decreased to 15.7% for fiscal year 2013 from 17.5% for fiscal year 2012 as a result of increased operating expenses as discussed above. Our income from operations as a percentage of net sales increased to 17.5% for fiscal year 2012 from 17.3% for fiscal year 2011 as a result of benefits realized from increases in productivity investments and leveraging existing infrastructure, partially offset by the decline in our gross profit margin.

We expect operating costs to continue to increase throughout fiscal year 2014 as compared to fiscal year 2013 due to increased expenses related to inclusion of a full year of BDNA operations, non-recurring integration costs and restructuring charges, increased compensation expenses and fringe benefits costs, and increased costs associated with executing on our vending and other investment programs. In addition we expect increased costs associated with our co-located headquarters in Davidson, North Carolina and we also expect to incur operating costs associated with the establishment of our new customer fulfillment center in Columbus, Ohio. We will continue to opportunistically seek additional growth opportunities that will help

23


 
 

TABLE OF CONTENTS

position us for future expansion. We believe that cash flows from operations, available cash and funds available under our revolving credit facility will be adequate to support our operations and growth plans for the next twelve months.

During fiscal year 2013, we decreased direct mail advertising levels compared to fiscal year 2012 levels. Excluding BDNA, the number of active customers (defined as those that have made at least one purchase in the last 12 months) at August 31, 2013 was approximately 322,000, which remained relatively consistent with fiscal 2012 and fiscal 2011 levels. In fiscal year 2013, we continued our practice of reducing direct marketing activities with customers who did not generate a positive return on investment.

The ISM index, which measures the economic activity of the U.S. manufacturing sector, is important to our planning because it historically has been an indicator of our manufacturing customers’ activity. A substantial portion of our revenues came from sales in the manufacturing sector during fiscal year 2013, including certain national account customers. An ISM index reading below 50.0% generally indicates that the manufacturing sector is expected to contract. Conversely, an ISM index reading above 50.0% generally indicates that the manufacturing sector is expected to expand. The ISM index was 56.2% for the month of September 2013 and averaged 52.0% during our fiscal year 2013. Details released with the most recent index indicate that economic activity in the manufacturing sector related to new orders, production, and employment are growing, while supplier deliveries are contracting from the previous month. Although the most recent measurement trend indicates that the manufacturing sector is expanding, there remains uncertainty relating to the current economic environment. Moreover, as discussed above, we have experienced continued contraction in our core metalworking manufacturing sector. Continued concerns relating to macroeconomic factors may continue to influence our customers to be more cautious in their purchases of MSC’s products. In addition, the recent federal government shutdown in October 2013 and uncertainty regarding the ongoing debates related to the U.S. budget and debt ceiling could adversely impact our future revenues and profitability. In particular, growth in sales to governmental agencies continues to be constrained by the government spending environment. Sales to our government accounts represented approximately 8% and 9%, respectively, of our total sales for the fiscal years ended August 31, 2013 and September 1, 2012.

We are continuing to take advantage of our strong balance sheet, which enables us to maintain or extend credit to our credit worthy customers and maintain optimal inventory and service levels to meet customer demands during these challenging economic conditions, while many of our smaller competitors in our fragmented industry continue to have difficulties in offering competitive service levels. We also believe that customers will continue to seek cost reductions and shorter cycle times from their suppliers. Our business model focuses on providing overall procurement cost reduction and just-in-time delivery to meet our customers’ needs. We focus on offering inventory, process and procurement solutions that reduce MRO supply chain costs and improve plant floor productivity for our customers. We will seek to continue to drive cost reduction throughout our business through cost saving strategies and increased leverage from our existing infrastructure, and continue to provide additional procurement cost savings solutions to our customers through technology such as our CMI, VMI, and vending programs.

On April 22, 2013, we acquired substantially all of the assets and assumed certain liabilities of BDNA, pursuant to the terms of the Asset Purchase Agreement, dated February 22, 2013, between us and Barnes. In connection with the acquisition, the total cash consideration we paid to Barnes was $547.3 million which is net of a post-closing working capital adjustment in the amount of $1.4 million that we received in September 2013. The acquisition was funded in part with borrowings under our new unsecured credit facility, which was closed simultaneously with the acquisition, and the remainder was funded from available cash reserves. BDNA is a leading distributor of fasteners and other high margin, low cost consumables with a broad distribution footprint throughout the U.S. and Canada. BDNA has a strong presence with customers across manufacturing, government, transportation and natural resources end-markets. BDNA specializes in lowering the total cost of their customers’ inventory management through storeroom organization and vendor managed inventory. With this acquisition, we add a highly complementary provider of fasteners and other high margin consumable products and services (often referred to as “Class C” items) with an experienced field sales force and VMI solution. With the integration of the two businesses, we will have the opportunity to bring our MRO offering to BDNA’s customers, and BDNA’s Class C offering and VMI system to our customers.

24


 
 

TABLE OF CONTENTS

As a result of the BDNA acquisition, we incurred non-recurring transaction and integration costs and restructuring charges associated with associate severance costs, stay bonuses and the impairment of long-lived assets due to the closure of facilities. For the fiscal year ended August 31, 2013, these costs amounted to $11.6 million. These costs are estimated to be between approximately $15.0 million and $20.0 million in fiscal year 2014.

Results of Operations

Net Sales

           
  Fiscal Years Ended   Fiscal Years Ended
     August 31, 2013   September 1, 2012   Percentage Change   September 1, 2012   August 27, 2011   Percentage Change
     (Dollars in thousands)
Net Sales   $ 2,457,649     $ 2,355,918       4.3 %    $ 2,355,918     $ 2,021,792       16.5 % 

Net sales increased 4.3% (6.4% on an average daily sales basis), or approximately $101.7 million for the fiscal year ended 2013. The fiscal 2013 year contained 52 weeks versus 53 weeks in fiscal 2012. We estimate that this $101.7 million increase in net sales is comprised of $108.4 million from the BDNA operations, which we acquired in April 2013 and $31.8 million from improved price realization, which includes the effects of price increases, discounting, changes in sales and product mix, and other items. This increase is offset by one less sales week in the fiscal year 2013 and lower sales volume. Of the $101.7 million increase in net sales, our government and national account programs (“Large Account Customer”) increased by approximately $4.3 million and there was an increase in our remaining business of approximately $97.4 million.

Net sales increased 16.5% (14.3% on an average daily sales basis), or approximately $334 million for the fiscal year ended 2012. The fiscal 2012 year contained 53 weeks versus 52 weeks in fiscal 2011. We estimate that of this $334 million increase in net sales, an increase of approximately $249 million is volume related, including the impact of the extra week and the impact of the acquisitions of American Tool Supply, Inc. and its affiliate, American Specialty Grinding Co., Inc. in July 2011, which are not currently identifiable, as they have been fully integrated. In addition, approximately $19 million of the increase in sales is related to the acquisition of ATS Industrial Supply, Inc. in January 2012, and the remaining $66 million reflects improved price realization, which includes the effects of price increases, discounting, changes in sales and product mix, and other items. Of the $334 million increase in net sales, our Large Account Customer increased by approximately $61 million and there was an increase in our remaining business of approximately $273 million.

The table below shows the pattern to the change in our fiscal quarterly and annual average daily sales from the same periods in the prior fiscal year:

Average Daily Sales Percentage Change — Total Company

         
  (unaudited)
Fiscal Periods   Thirteen
Week Period Ended
Fiscal Q4(1)
  Thirteen
Week Period Ended
Fiscal Q3
  Thirteen
Week Period Ended
Fiscal Q2
  Thirteen
Week Period Ended
Fiscal Q1
  Fiscal Year
Ended
2013 vs. 2012     12.7 %      5.7 %      1.2 %      5.8 %      6.4 % 
2012 vs. 2011     10.4 %      15.0 %      16.5 %      15.4 %      14.3 % 

(1) The fourth quarter of fiscal 2012 contained fourteen weeks.

25


 
 

TABLE OF CONTENTS

Excluding BDNA operations, the trends noted above can be further analyzed by customer type. Approximately 76% of our business is with manufacturing customers and our non-manufacturing customers represent approximately 24% of our business. BDNA operations are excluded from the tables below until we have annual comparative information. The tables below show the pattern to the change in our fiscal quarterly and annual average daily sales by customer type from the same periods in the prior fiscal year:

Average Daily Sales Percentage Change — Manufacturing Customers
(unaudited and excluding BDNA)

         
Fiscal Periods   Thirteen
Week Period Ended
Fiscal Q4(1)
  Thirteen
Week Period Ended
Fiscal Q3
  Thirteen
Week Period Ended
Fiscal Q2
  Thirteen
Week Period Ended
Fiscal Q1
  Fiscal Year
Ended
2013 vs. 2012     0.0 %      (0.3 )%      1.3 %      6.2 %      1.6 % 
2012 vs. 2011     11.9 %      17.8 %      19.4 %      19.8 %      17.1 % 

(1) The fourth quarter of fiscal 2012 contained fourteen weeks.

Average Daily Sales Percentage Change — Non-Manufacturing Customers
(unaudited and excluding BDNA)

         
Fiscal Periods   Thirteen
Week Period Ended
Fiscal Q4(1)
  Thirteen
Week Period Ended
Fiscal Q3
  Thirteen
Week Period Ended
Fiscal Q2
  Thirteen
Week Period Ended
Fiscal Q1
  Fiscal Year
Ended
2013 vs. 2012     1.0 %      0.9 %      0.4 %      4.9 %      1.7 % 
2012 vs. 2011     7.9 %      7.4 %      9.2 %      4.1 %      7.3 % 

(1) The fourth quarter of fiscal 2012 contained fourteen weeks.

Exclusive of BDNA operations and customers in the U.K., average order size increased to approximately $403 in fiscal 2013 as compared to $392 in fiscal 2012. We believe that our ability to transact business with our customers through various electronic portals and directly through the MSC Websites gives us a competitive advantage over smaller suppliers. Sales made through our eCommerce platforms, including sales made through the MSC Websites, Electronic Data Interchange systems, VMI systems, Extensible Markup Language ordering based systems, vending machine systems, hosted systems and other electronic portals, but excluding BDNA, were $1,034.7 million in fiscal 2013, representing 44.0% of consolidated net sales, compared to $965.3 million in fiscal 2012, representing 41.0% of consolidated net sales.

We grew our field sales associate headcount to 1,790 associates at August 31, 2013, an increase of approximately 63.5% from 1,095 associates at September 1, 2012. Included in the sales force numbers in fiscal year 2013 is 667 field sales associates added as a result of the BDNA acquisition. There were no branch openings during fiscal 2013. Field sales associate headcount also increased 4.2% to 1,095 associates at September 1, 2012 from 1,051 associates at August 27, 2011. These increases support our strategy to acquire new accounts and expand existing accounts across all customer types. We plan to continue to increase our field sales associate headcount through the end of the first quarter of fiscal 2014. We will continue to manage the timing of field sales associate increases and branch openings based on economic conditions and our selected mix of growth investments.

Gross Profit

           
  Fiscal Years Ended   Fiscal Years Ended
     August 31, 2013   September 1, 2012   Percentage Change   September 1, 2012   August 27, 2011   Percentage Change
     (Dollars in thousands)
Gross Profit   $ 1,118,516     $ 1,078,203       3.7 %    $ 1,078,203     $ 940,925       14.6 % 
Gross Profit Margin     45.5 %      45.8 %               45.8 %      46.5 %          

26


 
 

TABLE OF CONTENTS

Gross profit margin decreased in fiscal 2013 primarily as a result of increased costs of our products, changes in customer and product mix, and the temporary impact of lower gross profit margins from our vending programs. This was partially offset by higher gross margins from BDNA operations. We expect gross margins to increase in the first quarter of fiscal 2014 from fiscal year 2013 levels as a result of the mix of products BDNA brings to the Company in addition to a price increase in the later part of fiscal 2013 in conjunction with the release of our 2013 catalogs. However, price increases are constrained as we continue to experience aggressive pricing pressure from our competition.

Gross profit margin decreased in fiscal 2012 primarily as a result of increased costs of our products, changes in customer and product mix, and the temporary impact of lower gross profit margins from acquired businesses and our vending programs.

Operating Expenses

           
  Fiscal Years Ended   Fiscal Years Ended
     August 31, 2013   September 1, 2012   Percentage Change   September 1, 2012   August 27, 2011   Percentage Change
     (Dollars in thousands)
Operating Expenses   $ 732,990     $ 665,987       10.1 %    $ 665,987     $ 591,160       12.7 % 
Percentage of Net Sales     29.8 %      28.3 %               28.3 %      29.2 %          

The increase in operating expenses as a percentage of net sales for fiscal year 2013 as compared to the 2012 fiscal year was primarily a result of additional operating expenses incurred as a result of the acquired BDNA operations as well as for non-recurring transaction and integration costs associated with the acquisition. The decrease in operating expenses as a percentage of net sales for fiscal year 2012 as compared to the 2011 fiscal year was primarily a result of productivity gains and the allocation of fixed expenses over a larger revenue base.

The increase in operating expenses in dollars for fiscal 2013, as compared to fiscal 2012, was primarily a result of additional operating expenses incurred as a result of the acquired BDNA operations as well as non-recurring transaction and integration costs associated with the acquisition. BDNA’s operating expenses accounted for approximately $52.1 million of total operating expenses for fiscal 2013. Approximately $11.6 million of expenses related to non-recurring transaction and integration costs associated with the BDNA acquisition were also included in operating expenses for fiscal 2013. Excluding BDNA, operating expenses increased primarily due to an increase in payroll and payroll related costs, costs associated with the establishment of our new co-located headquarters in Davidson, North Carolina of approximately $4.3 million, and costs associated with our vending program. These costs were offset by the one less week in fiscal 2013, the Company’s cost containment initiatives and the reduction in the annual bonus expense accrual as the fiscal 2013 bonus payout is expected to be at lower levels than fiscal 2012 due to the Company’s fiscal 2013 performance relating to the current economic conditions.

The increase in operating expenses in dollars for fiscal 2012, as compared to fiscal 2011, was primarily a result of increases in payroll and payroll related costs, freight, other costs associated with our investment programs which included costs associated with our infrastructure investments, acquisition-related operating expenses, as well as additional costs associated with the extra week in fiscal 2012. In addition, we incurred operating expenses of approximately $1.2 million in fiscal 2012 related to the establishment of our new co-located headquarters in Davidson, North Carolina.

Payroll and payroll related costs represented approximately 54.0%, 54.8%, and 55.2%, of total operating expenses in fiscal 2013, fiscal 2012, and fiscal 2011, respectively. Included in these costs are salary, incentive compensation, fringe benefits, and sales commission. These costs increased in fiscal 2013 as compared to fiscal 2012 as a result of increased costs associated with the acquired BDNA operations, increased fringe benefit costs, and an increase in our staffing levels primarily related to sales associates, other program development and volume related positions to support our growth initiatives as well as significant investments in vending programs. These costs increased in fiscal 2012 as compared to fiscal 2011 as a result of increased fringe benefit costs and an increase in our staffing levels primarily related to sales associates, other program development and volume related positions to support our growth initiatives as well as significant investments in vending programs.

27


 
 

TABLE OF CONTENTS

Payroll and payroll related costs decreased as a percentage of operating expenses for fiscal year 2013 as compared to fiscal year 2012 as a result of lower commissions and the reduction in the annual bonus expense accrual as discussed above and as a result of increased other operating expenses due to the factors discussed above. Payroll and payroll related costs decreased as a percentage of operating expenses for fiscal year 2012 as compared to fiscal year 2011 primarily as a result of increased operating expenses due to the other factors discussed above.

We experienced an increase in the medical costs of our self-insured group health plan in fiscal 2013 as compared to fiscal 2012. This is a result of an increased number of participants in the plan including increased participants as a result of the BDNA acquisition and an increase in the number of medical claims. The number of medical claims filed increased 5.0% in fiscal 2013 as compared to fiscal 2012, which is driven by increased associate participation in the plan. The average cost per claim increased by 3.5% in fiscal 2013 as compared to fiscal 2012. The number of medical claims filed increased 9.4% in fiscal 2012 as compared to fiscal 2011, which is driven by increased associate participation in the plan. The average cost per claim increased by 6.8% in fiscal 2012 as compared to fiscal 2011. While it is uncertain as to whether the medical costs will continue to increase in fiscal 2014, medical cost inflation continues to rise as does the size of our insured population.

Freight expense was approximately $105.2 million, $102.6 million, and $92.4 million in fiscal 2013, fiscal 2012, and fiscal 2011, respectively. The primary drivers of the increase in freight expense dollars in fiscal 2013 compared to fiscal 2012 were increased sales from the acquired BDNA business, offset by lower rates negotiated with freight carriers and a decrease in the number of packages shipped. The increase in freight expense in fiscal 2012 as compared to fiscal 2011 was primarily a result of increased sales volume.

Income from Operations

           
  Fiscal Years Ended   Fiscal Years Ended
     August 31, 2013   September 1,
2012
  Percentage Change   September 1, 2012   August 27, 2011   Percentage Change
     (Dollars in thousands)
Income from Operations   $ 385,526     $ 412,216       (6.5 )%    $ 412,216     $ 349,765       17.9 % 
Percentage of Net Sales     15.7 %      17.5 %               17.5 %      17.3 %          

Income from operations for fiscal 2013 was $385.5 million, a decrease of $26.7 million, or 6.5% as compared to fiscal 2012, and as a percentage of net sales, decreased to 15.7% in fiscal 2013 from 17.5% in fiscal 2012. The dollar decrease in income from operations was primarily attributable to the increase in operating expenses as described above. Income from operations as a percentage of net sales decreased in fiscal 2013 as compared to fiscal 2012 due to the decrease in the gross profit margin and increase in operating expenses as a percentage of sales as discussed above.

Income from operations for fiscal 2012 was $412.2 million, an increase of $62.5 million, or 17.9% as compared to fiscal 2011, and as a percentage of net sales, increased to 17.5% in fiscal 2012 from 17.3% in fiscal 2011. The dollar increase in income from operations for fiscal 2012 was primarily attributable to the increase in net sales and gross profit, offset in part by the increase in operating expenses as described above. For fiscal 2012 compared to fiscal 2011, income from operations as a percentage of net sales increased due to the distribution of expenses over a larger revenue base, partially offset by the decrease in the gross profit margin.

Interest Expense

           
  Fiscal Years Ended   Fiscal Years Ended
     August 31, 2013   September 1, 2012   Percentage Change   September 1, 2012   August 27, 2011   Percentage Change
     (Dollars in thousands)
Interest Expense   $ (2,164 )    $ (241 )      797.9 %    $ (241 )    $ (258 )      (6.6 %) 

The increase in interest expense for fiscal 2013 compared to fiscal 2012 was primarily due to our borrowings under our New Credit Facility entered into in connection with the acquisition of BDNA. We incurred interest expense on the outstanding balance of the term loan and revolving loan facility during fiscal 2013. We did not have any outstanding borrowings under our old credit facility as of September 1, 2012 or at any time during the fiscal year ended September 1, 2012.

28


 
 

TABLE OF CONTENTS

Provision for Income Taxes

           
  Fiscal Years Ended   Fiscal Years Ended
     August 31, 2013   September 1, 2012   Percentage Change   September 1, 2012   August 27, 2011   Percentage Change
     (Dollars in thousands)
Provision for Income Taxes   $ 145,434     $ 153,111       (5.0 )%    $ 153,111     $ 130,544       17.3 % 
Effective Tax Rate     37.9 %      37.2 %               37.2 %      37.4 %          

Our fiscal 2013 effective tax rate was 37.9% as compared to 37.2% in fiscal 2012. Our fiscal 2012 effective tax rate was 37.2% as compared to 37.4% in fiscal 2011. These fluctuations resulted from changes in the tax laws and regulations in the various jurisdictions in which we operate and favorable settlements of state tax audits.

Net Income

           
  Fiscal Years Ended   Fiscal Years Ended
     August 31, 2013   September 1, 2012   Percentage Change   September 1, 2012   August 27, 2011   Percentage Change
     (Dollars in thousands, except per share data)
Net Income   $ 237,995     $ 259,031       (8.1 )%    $ 259,031     $ 218,786       18.4 % 
Diluted Earnings Per Share   $ 3.75     $ 4.09       (8.3 )%    $ 4.09     $ 3.43       19.2 % 

The factors which affected net income and diluted earnings per share for fiscal 2013 and fiscal 2012 as compared to prior periods have been discussed above. We repurchased approximately 0.1 million and 0.7 million shares of our Class A common stock in fiscal years 2013 and 2012, respectively.

Liquidity and Capital Resources

As of August 31, 2013, we held $55.9 million in cash and cash equivalent funds consisting primarily of money market deposit accounts. We maintain a substantial portion of our cash, and invest our cash equivalents, with well-known financial institutions. Historically, our primary capital needs have been to fund our working capital requirements necessitated by our sales growth, the costs of acquisitions, adding new products, facilities expansions, investments in vending solutions, technology investments, and productivity investments. Cash generated from operations, together with borrowings under credit facilities have been used to fund these needs, to repurchase shares of our Class A common stock, and to pay dividends. At August 31, 2013, total borrowings outstanding, representing amounts due under the credit facility (discussed below) and all capital leases and financing arrangements, were approximately $255.8 million. At September 1, 2012, total borrowings outstanding, representing amounts due under all capital leases and financing arrangements, were approximately $3.2 million.

On April 22, 2013, in connection with the acquisition of BDNA, we entered into a new $650.0 million credit facility (the “New Credit Facility”). The New Credit Facility, which matures on April 22, 2018, provides for a five-year unsecured revolving loan facility in the aggregate amount of $400.0 million and a five-year unsecured term loan facility in the aggregate amount of $250.0 million. The New Credit Facility replaced our $200.0 million former credit facility dated June 8, 2011.

The New Credit Facility also permits us, at our request, and upon the satisfaction of certain conditions, to add one or more incremental term loan facilities and/or increase the revolving loan commitments in an aggregate amount not to exceed $200.0 million. Subject to certain limitations, each such incremental term loan facility or revolving commitment increase will be on terms as agreed to by us, the Administrative Agent and the lenders providing such financing.

Borrowings under the New Credit Facility bear interest, at our option either, at (i) the LIBOR (London Interbank Offered Rate) rate plus the applicable margin for LIBOR loans ranging from 1.00% to 1.375%, based on our consolidated leverage ratio; or (ii) the greatest of (a) the Administrative Agent’s prime rate in effect on such day, (b) the federal funds effective rate in effect on such day, plus 0.50% and (c) the LIBOR rate that would be calculated as of such day in respect of a proposed LIBOR loan with a one-month interest period, plus 1.00%, plus, in the case of each of clauses (a) through (c), an applicable margin ranging from 0.00% to 0.375%, based on our consolidated leverage ratio. Based on the interest period we select, interest

29


 
 

TABLE OF CONTENTS

may be payable every one, two, three or six months. Interest is reset at the end of each interest period. We currently elect to have loans under the New Credit Facility bear interest based on LIBOR with one-month interest periods.

We are required to pay a quarterly undrawn fee ranging from 0.10% to 0.20% per annum on the unutilized portion of the New Credit Facility based on our consolidated leverage ratio. We are also required to pay quarterly letter of credit usage fees ranging between 1.00% to 1.375% (based on our consolidated leverage ratio) on the amount of the daily average outstanding letters of credit, and a quarterly fronting fee of 0.125% per annum on the undrawn and unexpired amount of each letter of credit.

The New Credit Facility contains customary restrictive covenants which are subject to a number of significant exceptions and limitations. The New Credit Facility also requires that we maintain a maximum consolidated leverage ratio of total indebtedness to EBITDA (earnings before interest expense, taxes, depreciation and amortization) of no more than 3.00 to 1.00, and a minimum consolidated interest coverage ratio of EBITDA to total interest expense of at least 3.00 to 1.00, during the term of the New Credit Facility. Borrowings under the New Credit Facility are guaranteed by certain of our subsidiaries.

We financed $370.0 million of the BDNA purchase price with the proceeds of the unsecured term loan facility and a portion of the unsecured revolving loan facility. The remaining balance of the revolving loan facility is available for working capital purposes. During fiscal 2013, we repaid the remaining outstanding balance of $120.0 million on the revolving loan facility. As of August 31, 2013, there were $250.0 million of borrowings outstanding under the term loan facility of the New Credit Facility, of which $12.5 million represents current maturities. As of September 1, 2012, no borrowings were outstanding under the former credit facility. At each of those dates, we were in compliance with the operating and financial covenants of the New Credit Facility and the former credit facility.

Net cash provided by operating activities for the fiscal years ended August 31, 2013 and September 1, 2012 was $325.4 million and $234.3 million, respectively. There are various increases and decreases contributing to this change. A decrease in the change in inventories contributed to the majority of the increase in net cash provided by operating activities. The decline in the change in inventories is a result of the recent decline in our sales growth rate.

Net cash provided by operating activities for the fiscal years ended September 1, 2012 and August 27, 2011 was $234.3 million and $210.0 million, respectively. The increase of approximately $24.3 million in net cash provided from operations resulted primarily from an increase in net income and a smaller increase in the change in accounts payable and accrued liabilities over the prior fiscal year. The smaller increase in the change in accounts payable and accrued liabilities over the prior fiscal year is a result of timing differences with vendor payments as well as a lower accrual in fiscal 2012 related to payroll and incentive compensation.

Working capital was $679.9 million at August 31, 2013, compared to $749.6 million at September 1, 2012. At these dates, the ratios of current assets to current liabilities were 4.2 and 5.4, respectively. The decrease in working capital and the current ratio is primarily related to the cash paid of $178.8 for the acquisition of BDNA and the borrowings made under the New Credit Facility in connection with the acquisition.

Net cash used in investing activities for the fiscal years ended August 31, 2013 and September 1, 2012 was $638.0 million and $81.1 million, respectively. The increase of approximately $556.9 million in net cash used in investing activities resulted from an increase in cash used in business acquisitions and an increase in expenditures for property, plant and equipment. Approximately $548.8 million was used for the acquisition of BDNA for fiscal 2013 compared to approximately $32.2 million used for the acquisition of ATS Industrial Supply Co., Inc. for fiscal 2012. The increase of approximately $41.6 million in expenditures for property, plant, and equipment for fiscal 2013 as compared to the prior fiscal year, was primarily due to increased investments in our vending solutions as well as investments in capital expenditures to construct and outfit the facilities in Davidson, North Carolina and Columbus, Ohio, which are discussed below.

Net cash used in investing activities for the fiscal years ended September 1, 2012 and August 27, 2011 was $81.1 million and $54.4 million, respectively. The increase of approximately $26.7 million in net cash used in investing activities resulted primarily from an increase in the expenditures for property, plant, and equipment. The increase in the purchase of property, plant, and equipment in fiscal 2012 as compared to fiscal

30


 
 

TABLE OF CONTENTS

2011 was primarily due to increased investments in our vending solutions as well as the purchase of land in Davidson, North Carolina. In addition, cash used in business acquisitions increased by approximately $4.5 million in fiscal 2012 as compared to 2011 resulting from the acquisition of ATS Industrial Supply, Inc. in fiscal 2012.

Net cash provided by financing activities for the fiscal year ended August 31, 2013 was $200.1 million as compared to net cash used in financing activities of $80.6 million for the fiscal year ended September 1, 2012. The major component contributing to the source of cash for fiscal 2013 were borrowings of $370.0 million under the New Credit Facility, which was entered into in connection with the acquisition of BDNA, offset by repayments on the revolving credit facility of the New Credit Facility of $120.0 million. The other component contributing to the source of cash for fiscal 2013 were net proceeds received from the exercise of the Company’s Class A common stock options in the amount of $21.7 million. Net cash provided by financing activities was partially offset by cash dividends paid of $75.9 million. The major components contributing to the use of cash for fiscal 2012 were the repurchase of shares of Class A common stock of $48.1 million and the cash dividends paid of $63.0 million, partially offset by the net proceeds received from the exercise of the Company’s Class A common stock options in the amount of $22.4 million.

Net cash used in financing activities for the fiscal years ended September 1, 2012 and August 27, 2011 was $80.6 million and $180.8 million, respectively. In fiscal year 2011, the Company made a special cash dividend payment in November 2010 of approximately $63.3 million and paid down its outstanding balance on the revolving credit line commitments of $39.4 million.

Our Board of Directors has established the MSC Stock Repurchase Plan (the “Repurchase Plan”). The Repurchase Plan allows the Company to repurchase shares at any time and in any increments it deems appropriate in accordance with Rule 10b-18 under the Securities Exchange Act of 1934, as amended. On October 21, 2011, our Board of Directors reaffirmed and replenished the Repurchase Plan so that the total number of shares of Class A common stock authorized for future repurchase was 5.0 million shares. We did not repurchase any of our Class A common stock in the open market in fiscal year 2013. We repurchased approximately 0.6 million shares of our Class A common stock in the open market for approximately $44.4 million in fiscal year 2012. This amount does not include shares withheld in satisfaction of associate tax withholding obligations relating to restricted share awards. Any future repurchases will depend on a variety of factors, including price and market conditions. We reissued approximately 53,000 and 52,000 shares of treasury stock during fiscal year 2013 and fiscal year 2012, respectively, to fund our Associate Stock Purchase Plan.

Our Board of Directors instituted a policy of paying regular quarterly cash dividends to shareholders. This policy is reviewed periodically by our Board of Directors. We paid cash dividends to shareholders totaling $75.9 million, $63.0 million and $119.3 million, in fiscal 2013, fiscal 2012, and fiscal 2011 respectively. Fiscal 2011 included a special dividend of $1.00 per share paid on November 16, 2010.

On October 24, 2013, our Board of Directors declared a dividend of $0.33 per share payable on November 20, 2013 to shareholders of record at the close of business on November 6, 2013. The dividend will result in a payout of approximately $20.9 million, based on the number of shares outstanding at October 24, 2013.

As a distributor, our use of capital is largely for working capital to support our revenue base. Capital commitments for property, plant and equipment generally are limited to information technology assets, warehouse equipment, office furniture and fixtures, building and leasehold improvements, construction and expansion, and vending machines. Therefore, the amount of cash consumed or generated by operations other than from net earnings will primarily be due to changes in working capital as a result of the rate of increases or decreases in sales. In periods when sales are increasing, as in fiscal 2012, the expanded working capital needs are funded primarily by cash from operations. In addition to our working capital needs, in fiscal 2013, we returned $75.9 million to shareholders in the form of cash dividends.

31


 
 

TABLE OF CONTENTS

In accordance with the construction of our co-located corporate headquarters in Davidson, North Carolina, completed in fiscal 2013, we spent approximately $31.9 million and $4.2 million in fiscal years 2013 and 2012, respectively, in capital expenditures, which included the purchase of the land and costs to construct and outfit the facility in Davidson. In addition, we incurred approximately $4.3 million in non-recurring costs associated with the establishment of our new co-located headquarters.

In accordance with our plans to build a new customer fulfillment center in Columbus, Ohio we expect to invest approximately $55.0 million in capital expenditures which includes the purchase of the land and costs to construct and outfit the facility in Columbus, of which we spent approximately $6.4 million in fiscal year 2013. We expect to complete construction and begin operation in late 2014.

In connection with the BDNA acquisition, we expect to incur non-recurring transaction and integration costs and restructuring charges associated with associate severance costs, stay bonuses and the impairment of long-lived assets due to the closure of facilities which are estimated to be between $25.0 million and $30.0 million, with the majority to be incurred in fiscal 2013 and fiscal 2014. For fiscal 2013, these costs amounted to $11.6 million.

We believe based on our current business plan that our existing cash, cash equivalents, funds available under our revolving credit facility, and cash flow from operations will be sufficient to fund our planned capital expenditures and operating cash requirements for at least the next 12 months.

Contractual Obligations

We are affiliated with one real estate entity (the “Affiliate”), which leased property to us as of August 31, 2013 and September 1, 2012. The Affiliate is owned by our principal shareholders (Mitchell Jacobson, our Chairman, and his sister Marjorie Gershwind Fiverson, and by their family related trusts). In addition, Erik Gershwind, our President and Chief Executive Officer, served as an officer and director of the affiliated real estate entity during fiscal 2013. Effective November 1, 2010, we relocated from the branch office owned by another affiliated real estate entity and currently lease only our Atlanta Customer Fulfillment Center from the Affiliate. We paid rent under an operating lease to the Affiliate of approximately $2.3 million, $2.3 million, and $2.2 million for fiscal years 2013, 2012, and 2011, respectively, in connection with our occupancy of our Atlanta Customer Fulfillment Center. In the opinion of our management, based on its market research, the lease with the Affiliate is on terms which approximated fair market value at its inception.

The following table summarizes our contractual obligations at August 31, 2013 (in thousands):

         
Contractual Obligations   Total   Less than
1 year
  1 – 3
years
  3 – 5
years
  More than
5 years
Operating lease obligations with non Affiliates(1)   $ 56,324     $ 20,466     $ 25,951     $ 8,069     $ 1,838  
Operating lease obligations with Affiliates(1)     41,358       2,296       4,664       4,725       29,673  
Capital lease obligations and financing obligations with non Affiliates(2)     5,809       1,723       2,086             2,000  
Maturities of New Credit Facility     250,000       12,500       50,000       187,500        
Total contractual obligations   $ 353,491     $ 36,985     $ 82,701     $ 200,294     $ 33,511  

(1) Certain of our operations are conducted on leased premises, one of which is leased from the Affiliate, as described above. These leases (most of which require us to provide for the payment of real estate taxes, insurance and other operating costs) are for varying periods, the longest extending to the year 2030. In addition, we are obligated under certain equipment and automobile operating leases, which expire on varying dates through 2018.
(2) During the fiscal year ended August 31, 2013, the Company entered into various capital leases and financing obligations for certain information technology equipment, which expire on varying dates through 2016.
(3) The Company has recorded a noncurrent liability of $4.7 million for tax uncertainties and interest for the fiscal year ended August 31, 2013. This amount is excluded from the table above, as the Company cannot make reliable estimates of these cash flows by period. See Note 8 to the Consolidated Financial Statements.

32


 
 

TABLE OF CONTENTS

Off-Balance Sheet Arrangements

We have not entered into any off-balance sheet arrangements.

Critical Accounting Estimates

We make estimates, judgments and assumptions in determining the amounts reported in the condensed consolidated financial statements and accompanying notes. Estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances. The estimates are used to form the basis for making judgments about the carrying values of assets and liabilities and the amount of revenues and expenses reported that are not readily apparent from other sources. Actual results may differ from these estimates. Our significant accounting policies are described in the notes to the consolidated financial statements. The accounting policies described below are impacted by our critical accounting estimates.

Allowance for Doubtful Accounts

We perform periodic credit evaluations of our customers’ financial condition and collateral is generally not required. The Company considers several factors to estimate the allowance for uncollectible accounts receivable including the age of the receivables and the historical ratio of actual write-offs to the age of the receivables. The analyses performed also take into consideration economic conditions that may have an impact on a specific industry, group of customers or a specific customer. Based on our analysis of actual historical write-offs of uncollectible accounts receivable, the Company’s estimates and assumptions have been materially accurate in regards to the valuation of its allowance for doubtful accounts. For fiscal years 2013, 2012 and 2011, actual results did not vary materially from estimated amounts.

Inventory Valuation Reserve

We establish inventory valuation reserves for shrinkage and slow moving or obsolete inventory. Provisions for inventory shrinkage are based on historical experience to account for unmeasured usage or loss.

Inventories consist of merchandise held for resale and are stated at the lower of weighted average cost or market. We evaluate the recoverability of our slow-moving or obsolete inventories at least quarterly. We estimate the recoverable cost of such inventory by product type while considering factors such as its age, historic and current demand trends, the physical condition of the inventory, as well as assumptions regarding future demand. Our ability to recover our cost for slow moving or obsolete inventory can be affected by such factors as general market conditions, future customer demand and relationships with suppliers.

Goodwill and Intangible Assets

The purchase price of an acquired company is allocated between intangible assets and the net tangible assets of the acquired business with the residual of the purchase price recorded as goodwill. The determination of the value of the intangible assets acquired involves certain judgments and estimates. These judgments can include, but are not limited to, the cash flows that an asset is expected to generate in the future and the appropriate weighted average cost of capital.

At August 31, 2013, our goodwill totaled $630.3 million and our identifiable intangible assets, net totaled $155.3 million. The Company annually reviews goodwill and intangible assets that have indefinite lives for impairment in its fiscal fourth quarter and when events or changes in circumstances indicate the carrying value of these assets might exceed their current fair values. Goodwill is tested for impairment at the reporting unit level by first performing a qualitative assessment to determine whether it is more likely than not that the fair value of the reporting unit is less than its carrying value. If the reporting unit does not pass the qualitative assessment, then the reporting unit's carrying value is compared to its fair value. Goodwill is considered impaired if the carrying value of the reporting unit exceeds its fair value. We conducted our annual impairment test of goodwill and intangibles in the fiscal fourth quarters of 2013 and 2012. The results of these tests indicated that based on the qualitative assessment of goodwill and quantitative assessment of intangible assets that have indefinite lives, it was not likely that the fair values are less than the carrying amount.

Income Taxes

The Company recognizes deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, deferred tax

33


 
 

TABLE OF CONTENTS

assets and liabilities are determined based on the differences between the financial reporting and tax basis of assets and liabilities, using enacted tax rates in effect for the year in which the differences are expected to reverse. The tax balances and income tax expense recognized by the Company are based on management’s interpretations of the tax laws of multiple jurisdictions. Income tax expense reflects the Company’s best estimates and assumptions regarding, among other items, the level of future taxable income, interpretation of tax laws and uncertain tax positions.

Other

Other significant accounting policies, not involving the same level of measurement uncertainties as those discussed above, are nevertheless important to an understanding of the financial statements. Policies such as revenue recognition, depreciation, intangibles, long-lived assets and warranties require judgments on complex matters that are often subject to multiple external sources of authoritative guidance such as the FASB and the Securities and Exchange Commission (the “SEC”). Possible changes in estimates or assumptions associated with these policies are not expected to have a material effect on the financial condition or results of operations of the Company. More information on these additional accounting policies can be found in Note 2 to the Consolidated Financial Statements.

Recently Issued Accounting Pronouncements

Recognizing assets and liabilities arising from lease contracts on the balance sheet

In May 2013, the Financial Accounting Standards Board (“FASB”) reissued an exposure draft on lease accounting that would require entities to recognize assets and liabilities arising from lease contracts on the balance sheet. The proposed exposure draft states that lessees and lessors should apply a “right-of-use model” in accounting for all leases. Under the proposed model, lessees would recognize an asset for the right to use the leased asset, and a liability for the obligation to make rental payments over the lease term. When measuring the asset and liability, variable lease payments are excluded whereas renewal options that provide a significant economic incentive upon renewal would be included. The lease expense from real estate based leases would continue to be recorded under a straight line approach, but other leases not related to real estate would be expensed using an effective interest method that would accelerate lease expense. Comments were due by September 13, 2013. A final standard is currently expected to be issued in 2014 and would be effective no earlier than annual reporting periods beginning on January 1, 2017 (fiscal 2018 for the Company). The Company is currently assessing the impact that the adoption of the guidance would have on its financial position, results of operations and cash flows.

Reclassification Adjustments out of Accumulated Other Comprehensive Income

In February 2013, the FASB issued an accounting standard which requires an entity to provide information about the amounts reclassified out of accumulated other comprehensive income by component. In addition, an entity is required to present, either on the face of the statement where net income is presented or in the notes, significant amounts reclassified out of accumulated other comprehensive income by the respective line items of net income but only if the amount reclassified is required under U.S. GAAP to be reclassified to net income in its entirety in the same reporting period. For other amounts that are not required under U.S. GAAP to be reclassified in their entirety to net income, an entity is required to cross-reference to other disclosures required under U.S. GAAP that provide additional detail about those amounts. This guidance is effective for periods beginning after December 15, 2012. The adoption of this new guidance did not have any impact on the Company’s financial position, results of operations or cash flows.

Testing Indefinite-lived Intangible Assets for Impairment

In July 2012, the FASB issued an accounting standard update that allows an entity the option to first assess qualitative factors to determine whether the existence of events and circumstances indicates that it is not more likely than not that the indefinite-lived intangible asset is impaired. An entity no longer will be required to perform the quantitative impairment test of indefinite-lived intangible assets if, after it assesses the totality of events and circumstances, the entity concludes that it is not more likely than not that the indefinite-lived intangible asset is impaired. The guidance is effective for annual and interim impairment tests performed for fiscal years beginning after September 15, 2012. The Company does not anticipate that the adoption of the guidance will have any impact on its financial position, results of operations or cash flows.

34


 
 

TABLE OF CONTENTS

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

Interest Rate Risks

On April 22, 2013, in connection with the acquisition of BDNA, we entered into a new $650.0 million credit facility (the “New Credit Facility”). The New Credit Facility, which matures on April 22, 2018, provides for a five-year unsecured revolving loan facility in the aggregate amount of $400.0 million and a five-year unsecured term loan facility in the aggregate amount of $250.0 million. The New Credit Facility replaced our previous $200.0 million Credit Agreement, dated June 8, 2011.

Borrowings under the New Credit Facility bear interest, at our option either, at (i) the LIBOR (London Interbank Offered Rate) rate plus the applicable margin for LIBOR loans ranging from 1.00% to 1.375%, based on the Company’s consolidated leverage ratio; or (ii) the greatest of (a) the Administrative Agent’s prime rate in effect on such day, (b) the federal funds effective rate in effect on such day, plus 0.50% and (c) the LIBOR rate that would be calculated as of such day in respect of a proposed LIBOR loan with a one-month interest period, plus 1.00%, plus, in the case of each of clauses (a) through (c), an applicable margin ranging from 0.00% to 0.375%, based on our consolidated leverage ratio. The Company is also required to pay quarterly letter of credit usage fees ranging between 1.00% to 1.375% (based on our consolidated leverage ratio) on the amount of the daily average outstanding letters of credit, and a quarterly fronting fee of 0.125% per annum on the undrawn and unexpired amount of each letter of credit. Based on the interest period we select, interest may be payable every one, two, three or six months. Interest is reset at the end of each interest period. We currently elect to have loans under the New Credit Facility bear interest based on LIBOR with one-month interest periods. The applicable borrowing rate for us for any borrowings outstanding under the New Credit Facility at August 31, 2013 was 1.19%, which represents LIBOR plus 1.0%.

The New Credit Facility contains customary restrictive covenants which are subject to a number of significant exceptions and limitations. The New Credit Facility also requires that we maintain a maximum consolidated leverage ratio of total indebtedness to EBITDA (earnings before interest expense, taxes, depreciation and amortization) of no more than 3.00 to 1.00, and a minimum consolidated interest coverage ratio of EBITDA to total interest expense of at least 3.00 to 1.00, during the term of the New Credit Facility. Borrowings under the New Credit Facility are guaranteed by certain of our subsidiaries.

As of August 31, 2013, there were $250.0 million of borrowings outstanding under the term loan facility of the New Credit Facility, of which $12.5 million represents current maturities. At August 31, 2013, we were in compliance with the operating and financial covenants of the New Credit Facility.

Borrowings under our New Credit Facility are subject to fluctuations in the interest rate, which have a corresponding effect on our interest expense. A 100 basis point increase or decrease in interest rates would not have a significant impact on future earnings under our current capital structure. We have monitored and will continue to monitor our exposure to interest rate fluctuations.

In addition, our interest income is most sensitive to changes in the general level of interest rates. In this regard, changes in interest rates affect the interest earned on our cash and cash equivalents.

We do not currently use interest rate derivative instruments to manage exposure to interest rate changes.

Foreign Currency Risks

Approximately 97% of our sales are denominated in U.S. dollars and are primarily from customers in the United States. As a result, currency fluctuations are currently not material to our operating results. To the extent that we engage in more significant international sales in the future, an increase in the value of the U.S. dollar relative to foreign currencies could make our products less competitive in international markets. We have monitored and will continue to monitor our exposure to currency fluctuations.

35


 
 

TABLE OF CONTENTS

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 
  PAGE
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM     37  
CONSOLIDATED BALANCE SHEETS AT AUGUST 31, 2013 AND SEPTEMBER 1, 2012     38  
CONSOLIDATED STATEMENTS OF INCOME FOR THE FISCAL YEARS ENDED
AUGUST 31, 2013, SEPTEMBER 1, 2012 AND AUGUST 27, 2011
    39  
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME FOR THE FISCAL YEARS ENDED AUGUST 31, 2013, SEPTEMBER 1, 2012 AND AUGUST 27, 2011     40  
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY FOR THE FISCAL YEARS ENDED AUGUST 31, 2013, SEPTEMBER 1, 2012 AND AUGUST 27, 2011     41  
CONSOLIDATED STATEMENTS OF CASH FLOWS FOR THE FISCAL YEARS ENDED AUGUST 31, 2013, SEPTEMBER 1, 2012 AND AUGUST 27, 2011     42  
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS     43  

36


 
 

TABLE OF CONTENTS

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders of MSC Industrial Direct Co., Inc.

We have audited the accompanying consolidated balance sheets of MSC Industrial Direct Co., Inc. and Subsidiaries (the “Company”) as of August 31, 2013 and September 1, 2012, and the related consolidated statements of income, comprehensive income, shareholders’ equity, and cash flows for each of the three fiscal years in the period ended August 31, 2013. Our audits also included the financial statement schedule listed in the Index at Item 15(a). These financial statements and schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of MSC Industrial Direct Co., Inc. and Subsidiaries at August 31, 2013 and September 1, 2012, and the consolidated results of their operations and their cash flows for each of the three fiscal years in the period ended August 31, 2013, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), MSC Industrial Direct Co., Inc. and Subsidiaries’ internal control over financial reporting as of August 31, 2013, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 Framework) and our report dated October 30, 2013 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Jericho, New York
October 30, 2013

37


 
 

TABLE OF CONTENTS

MSC INDUSTRIAL DIRECT CO., INC. AND SUBSIDIARIES
 
CONSOLIDATED BALANCE SHEETS
(In thousands, except share data)

   
  August 31,
2013
  September 1,
2012
ASSETS
                 
CURRENT ASSETS:
                 
Cash and cash equivalents   $ 55,876     $ 168,453  
Accounts receivable, net of allowance for doubtful accounts of $7,523 and $6,934, respectively     345,366       297,215  
Inventories     419,012       393,412  
Prepaid expenses and other current assets     35,464       29,313  
Deferred income taxes     37,771       31,718  
Total current assets     893,489       920,111  
Property, plant and equipment, net     251,536       174,597  
Goodwill     630,318       289,124  
Identifiable intangibles, net     155,324       51,212  
Other assets     12,336       9,832  
Total assets   $ 1,943,003     $ 1,444,876  
LIABILITIES AND SHAREHOLDERS’ EQUITY
                 
CURRENT LIABILITIES:
                 
Current maturities of long-term debt   $ 14,184     $ 1,007  
Accounts payable     113,636       96,640  
Accrued liabilities     85,759       72,868  
Total current liabilities     213,579       170,515  
Long-term debt, net of current maturities     241,566       2,189  
Deferred income taxes and tax uncertainties     97,475       85,061  
Total liabilities     552,620       257,765  
COMMITMENTS AND CONTINGENCIES
                 
SHAREHOLDERS’ EQUITY
                 
Preferred stock; $0.001 par value; 5,000,000 shares authorized; none issued and outstanding            
Class A common stock (one vote per share); $0.001 par value;
100,000,000 shares authorized; 54,634,259 and 52,581,838 shares issued, respectively
    55       53  
Class B common stock (ten votes per share); $0.001 par value; 50,000,000 shares authorized; 14,140,747 and 15,560,294 shares issued and outstanding, respectively     14       16  
Additional paid-in capital     528,770       483,682  
Retained earnings     1,132,868       970,965  
Accumulated other comprehensive loss     (4,427 )      (2,443 ) 
Class A treasury stock, at cost, 5,340,587 and 5,342,091 shares, respectively     (266,897 )      (265,162 ) 
Total shareholders’ equity     1,390,383       1,187,111  
Total liabilities and shareholders’ equity   $ 1,943,003     $ 1,444,876  

 
 
See accompanying notes to consolidated financial statements.

38


 
 

TABLE OF CONTENTS

MSC INDUSTRIAL DIRECT CO., INC. AND SUBSIDIARIES
 
CONSOLIDATED STATEMENTS OF INCOME
(In thousands, except net income per share data)

     
  For The Fiscal Years Ended
     August 31,
2013
(52 weeks)
  September 1,
2012
(53 weeks)
  August 27,
2011
(52 weeks)
NET SALES   $ 2,457,649     $ 2,355,918     $ 2,021,792  
COST OF GOODS SOLD     1,339,133       1,277,715       1,080,867  
Gross profit     1,118,516       1,078,203       940,925  
OPERATING EXPENSES     732,990       665,987       591,160  
Income from operations     385,526       412,216       349,765  
OTHER (EXPENSE) INCOME:
                          
Interest expense     (2,164 )      (241 )      (258 ) 
Interest income     117       196       58  
Other expense, net     (50 )      (29 )      (235 ) 
Total other — expense     (2,097 )      (74 )      (435 ) 
Income before provision for income taxes     383,429       412,142       349,330  
Provision for income taxes     145,434       153,111       130,544  
Net income   $ 237,995     $ 259,031     $ 218,786  
PER SHARE INFORMATION:
                          
Net income per common share:
                          
Basic   $ 3.77     $ 4.12     $ 3.45  
Diluted   $ 3.75     $ 4.09     $ 3.43  
Weighted average shares used in computing net income per common share:
                          
Basic     62,695       62,434       62,902  
Diluted     63,011       62,803       63,324  

 
 
See accompanying notes to consolidated financial statements.

39


 
 

TABLE OF CONTENTS

MSC INDUSTRIAL DIRECT CO., INC. AND SUBSIDIARIES
 
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(In thousands)

     
  For The Fiscal Years Ended
     August 31,
2013
(52 weeks)
  September 1,
2012
(53 weeks)
  August 27,
2011
(52 weeks)
Net income, as reported   $ 237,995     $ 259,031     $ 218,786  
Foreign currency translation adjustment     (1,984 )      (358 )      575  
Comprehensive income   $ 236,011     $ 258,673     $ 219,361  

 
 
See accompanying notes to consolidated financial statements.

40


 
 

TABLE OF CONTENTS

MSC INDUSTRIAL DIRECT CO., INC. AND SUBSIDIARIES
 
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
FOR THE FISCAL YEARS ENDED AUGUST 31, 2013 (52 weeks),
SEPTEMBER 1, 2012 (53 weeks), AND AUGUST 27, 2011 (52 weeks)
  (In thousands)

                   
                   
  Class A
Common Stock
  Class B
Common Stock
  Additional
Paid-In
Capital
  Retained
Earnings
  Accumulated
Other
Comprehensive
Loss
  Class A
Treasury Stock
     Shares   Amount   Shares   Amount   Shares   Amount
at cost
  Total
BALANCE, August 28, 2010     48,380     $ 48       17,925     $ 18     $ 378,315     $ 675,968     $ (2,660 )      3,528     $ (151,809 )    $ 899,880  
Exchange of Class B common stock for
Class A common stock
    1,525       2       (1,525 )      (2 )                                     
Exercise of common stock options, including income tax benefits of $6,973     1,060       1                   44,655                               44,656  
Common stock issued under associate stock purchase plan                             949                   (53 )      2,034       2,983  
Grant of restricted common stock, net of cancellation     158                                                        
Stock-based compensation                             14,768                               14,768  
Purchase of treasury stock                                               1,248       (69,279 )      (69,279 ) 
Cash dividends paid on Class A common stock                                   (86,234 )                        (86,234 ) 
Cash dividends paid on Class B common stock                                   (33,023 )                        (33,023 ) 
Issuance of dividend equivalent units                             348       (348 )                         
Net income                                   218,786                         218,786  
Foreign currency translation adjustment                                         575                   575  
BALANCE, August 27, 2011     51,123     $ 51       16,400     $ 16     $ 439,035     $ 775,149     $ (2,085 )      4,723     $ (219,054 )    $ 993,112  
Exchange of Class B common stock for
Class A common stock
    840       1       (840 )                                          1  
Exercise of common stock options, including income tax benefits of $5,376.     538       1                   27,797                               27,798  
Common stock issued under associate stock purchase plan                             1,397                   (52 )      1,990       3,387  
Grant of restricted common stock, net of cancellation     81                                                        
Stock-based compensation                             15,262                               15,262  
Purchase of treasury stock                                               671       (48,098 )      (48,098 ) 
Cash dividends paid on Class A common stock                                   (46,926 )                        (46,926 ) 
Cash dividends paid on Class B common stock                                   (16,098 )                        (16,098 ) 
Issuance of dividend equivalent units                             191       (191 )                         
Net income                                   259,031                         259,031  
Foreign currency translation adjustment                                         (358 )                  (358 ) 
BALANCE, September 1, 2012     52,582     $ 53       15,560     $ 16     $ 483,682     $ 970,965     $ (2,443 )      5,342     $ (265,162 )    $ 1,187,111  
Exchange of Class B common stock for
Class A common stock
    1,419       2       (1,419 )      (2 )                                     
Exercise of common stock options, including income tax benefits of $5,621     504                         27,285                               27,285  
Common stock issued under associate stock purchase plan                             1,747                   (53 )      2,038       3,785  
Grant of restricted common stock, net of cancellation     129                                                        
Stock-based compensation                             15,824                               15,824  
Purchase of treasury stock                                               52       (3,773 )      (3,773 ) 
Cash dividends paid on Class A common stock                                   (58,245 )                        (58,245 ) 
Cash dividends paid on Class B common stock                                   (17,615 )                        (17,615 ) 
Issuance of dividend equivalent units                             232       (232 )                         
Net income                                   237,995                         237,995  
Foreign currency translation adjustment                                         (1,984 )                  (1,984 ) 
BALANCE, August 31, 2013     54,634     $ 55       14,141     $ 14     $ 528,770     $ 1,132,868     $ (4,427 )      5,341     $ (266,897 )    $ 1,390,383  

 
 
See accompanying notes to consolidated financial statements.

41


 
 

TABLE OF CONTENTS

MSC INDUSTRIAL DIRECT CO., INC. AND SUBSIDIARIES
 
CONSOLIDATED STATEMENTS OF CASH FLOWS
FOR THE FISCAL YEARS ENDED AUGUST 31, 2013, SEPTEMBER 1, 2012 AND AUGUST 27, 2011
(In thousands)

     
  For The Fiscal Years Ended
     August 31,
2013
(52 weeks)
  September 1,
2012
(53 weeks)
  August 27,
2011
(52 weeks)
CASH FLOWS FROM OPERATING ACTIVITIES:
                          
Net income   $ 237,995     $ 259,031     $ 218,786  
Adjustments to reconcile net income to net cash provided by operating activities:
                          
Depreciation and amortization     49,479       34,723       29,159  
Stock-based compensation     15,824       15,262       14,768  
Loss on disposal of property, plant and equipment     941       1,129       116  
Provision for doubtful accounts     3,499       3,560       2,733  
Deferred income taxes and tax uncertainties     6,360       2,765       15,270  
Excess tax benefits from stock-based compensation     (6,040 )      (4,888 )      (7,356 ) 
Write-off of deferred financing costs on previous
credit facility
    594              
Changes in operating assets and liabilities, net of amounts associated with business acquired:
                          
Accounts receivable     (15,630 )      (30,213 )      (38,304 ) 
Inventories     23,409       (45,306 )      (46,895 ) 
Prepaid expenses and other current assets     (1,619 )      (6,598 )      (1,782 ) 
Other assets     (1,784 )      1,268       2,019  
Accounts payable and accrued liabilities     12,409       3,551       21,448  
Total adjustments     87,442       (24,747 )      (8,824 ) 
Net cash provided by operating activities     325,437       234,284       209,962  
CASH FLOWS FROM INVESTING ACTIVITIES:
                          
Expenditures for property, plant and equipment     (89,252 )      (47,691 )      (25,479 ) 
Cash used in business acquisitions, net of cash received     (548,769 )      (33,451 )      (28,948 ) 
Net cash used in investing activities     (638,021 )      (81,142 )      (54,427 ) 
CASH FLOWS FROM FINANCING ACTIVITIES:
                          
Purchases of treasury stock     (3,773 )      (48,098 )      (69,279 ) 
Payment of cash dividends     (75,860 )      (63,024 )      (119,257 ) 
Payments on capital lease and financing obligations     (1,300 )      (1,385 )       
Excess tax benefits from stock-based compensation     6,040       4,888       7,356  
Proceeds from sale of Class A common stock in connection with associate stock purchase plan     3,785       3,387       2,983  
Proceeds from exercise of Class A common stock options     21,664       22,422       37,683  
Borrowings under the financing obligation     1,417       1,192        
Borrowings under Credit Facility     370,000              
Credit facility financing costs     (1,912 )            (938 ) 
Payments of notes payable and revolving loans under the Credit Facility     (120,000 )            (39,361 ) 
Net cash provided by (used in) in financing activities     200,061       (80,618 )      (180,813 ) 
Effect of foreign exchange rate changes on cash and cash equivalents     (54 )      (30 )      46  
Net (decrease) increase in cash and cash equivalents     (112,577 )      72,494       (25,232 ) 
CASH AND CASH EQUIVALENTS, beginning of year     168,453       95,959       121,191  
CASH AND CASH EQUIVALENTS, end of year   $ 55,876     $ 168,453     $ 95,959  
SUPPLEMENTAL DISCLOSURES OF CASH FLOW INFORMATION:
                          
Cash paid during the year for income taxes   $ 130,342     $ 145,651     $ 109,001  
Cash paid during the year for interest   $ 1,281     $ 55     $ 93  

 
 
See accompanying notes to consolidated financial statements.

42


 
 

TABLE OF CONTENTS

MSC INDUSTRIAL DIRECT CO., INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(Dollar amounts and shares in thousands, except per share data)

1. BUSINESS

MSC Industrial Direct Co., Inc. (together with its subsidiaries, the “Company” or “MSC”) is a distributor of metalworking and maintenance, repair and operations (“MRO”) supplies with co-located headquarters in Melville, New York and Davidson, North Carolina. The Company has additional office support centers in Southfield, Michigan and Cleveland, Ohio and serves primarily domestic markets through its distribution network of 105 branch offices and 14 customer fulfillment centers.

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Principles of Consolidation

The accompanying consolidated financial statements include the accounts of MSC and its subsidiaries, all of which are wholly owned. All intercompany balances and transactions have been eliminated in consolidation.

The Company acquired substantially all of the assets and assumed certain liabilities of the North American distribution business (“BDNA”) of Barnes Group Inc. (“Barnes”) on April 22, 2013. The results of BDNA are included in the current period since the date of acquisition.

Fiscal Year

The Company’s fiscal year is on a 52 or 53 week basis, ending on the Saturday closest to August 31st of each year. The financial statements for fiscal years 2013 and 2011 contain activity for 52 weeks. Fiscal year 2012 is a 53-week period with the extra week occurring in the Company’s fiscal fourth quarter. Unless the context requires otherwise, references to years contained herein pertain to the Company’s fiscal year.

Use of Estimates

The preparation of financial statements, in conformity with accounting principles generally accepted in the United States, requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates and assumptions used in preparing the accompanying consolidated financial statements.

Cash and Cash Equivalents

The Company considers all short-term, highly liquid investments with maturities of three months or less at the date of purchase to be cash equivalents. Cash and cash equivalents are carried at cost, which approximates fair value.

Concentrations of Credit Risk

The Company’s mix of receivables is diverse, with approximately 322,000 active customer accounts (customers that have made at least one purchase in the last 12 months and excluding BDNA) at August 31, 2013. The Company sells its products primarily to end-users. The Company’s customer base represents many diverse industries primarily concentrated in the United States. The Company performs periodic credit evaluations of its customers’ financial condition and collateral is generally not required. Receivables are generally due within 30 days. The Company evaluates the collectability of accounts receivable based on numerous factors, including past transaction history with customers and their credit worthiness and provides a reserve for accounts that are potentially uncollectible.

The Company’s cash and cash equivalents include deposits with commercial banks and investments in money market funds. The Company maintains the majority of its cash and invests its cash equivalents with high quality financial institutions. Deposits held with banks may exceed insurance limits. While MSC monitors the creditworthiness of these commercial banks and financial institutions, a crisis in the United States financial systems could limit access to funds and/or result in a loss of principal. The terms of these deposits and investments provide that all monies are available to the Company upon demand.

43


 
 

TABLE OF CONTENTS

MSC INDUSTRIAL DIRECT CO., INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(Dollar amounts and shares in thousands, except per share data)

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES  – (continued)

Allowance for Doubtful Accounts

The Company establishes reserves for customer accounts that are deemed uncollectible. The method used to estimate the allowances is based on several factors, including the age of the receivables and the historical ratio of actual write-offs to the age of the receivables. These analyses also take into consideration economic conditions that may have an impact on a specific industry, group of customers or a specific customer. While the Company has a broad customer base, representing many diverse industries primarily in all regions of the United States, a general economic downturn could result in higher than expected defaults, and therefore, the need to revise estimates for bad debts.

Inventory Valuation

Inventories consist of merchandise held for resale and are stated at the lower of weighted average cost or market. The Company evaluates the recoverability of our slow-moving or obsolete inventories quarterly. The Company estimates the recoverable cost of such inventory by product type while considering such factors as its age, historic and current demand trends, the physical condition of the inventory, as well as assumptions regarding future demand. The Company’s ability to recover its cost for slow moving or obsolete inventory can be affected by such factors as general market conditions, future customer demand, and relationships with suppliers. Substantially all of the Company’s inventories have demonstrated long shelf lives, are not highly susceptible to obsolescence, and are eligible for return under various supplier return programs.

Property, Plant and Equipment

Property, plant and equipment and capitalized computer software are stated at cost less accumulated depreciation. Expenditures for maintenance and repairs are charged to expense as incurred; costs of major renewals and improvements are capitalized. At the time property and equipment are retired or otherwise disposed of, the cost and accumulated depreciation are eliminated from the asset and accumulated depreciation accounts and the profit or loss on such disposition is reflected in income.

Depreciation and amortization of property, plant and equipment are computed for financial reporting purposes on the straight-line method based on the estimated useful lives of the assets. Leasehold improvements are amortized over either their respective lease terms or their estimated lives, whichever is shorter. Estimated useful lives range from five to forty years for leasehold improvements and buildings and three to twenty years for furniture, fixtures, and equipment.

Capitalized computer software costs are amortized using the straight-line method over the estimated useful life. These costs include purchased software packages, payments to vendors and consultants for the development, implementation or modification of purchased software packages for Company use, and payroll and related costs for employees associated with internal-use software projects. Capitalized computer software costs are included within property, plant and equipment on the Company’s Consolidated Balance Sheets.

Goodwill and Other Intangible Assets

The Company’s business acquisitions typically result in the recording of goodwill and other intangible assets, which affect the amount of amortization expense and possibly impairment write-downs that the Company may incur in future periods. Goodwill represents the excess of the purchase price paid over the fair value of the net assets acquired in connection with business acquisitions. The Company annually reviews goodwill and intangible assets that have indefinite lives for impairment in its fiscal fourth quarter and when events or changes in circumstances indicate the carrying values of these assets might exceed their current fair values. Goodwill impairment is assessed based on the FASB’s new accounting guidance, which allows an entity to first assess quali